I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Mh13001 220V Digital Air Humidity Control Controller Range 1% – 99%
₹1,700.00 Original price was: ₹1,700.00.₹1,600.00Current price is: ₹1,600.00. inc. GST
- Model Name: MH 13001
- Voltage: 220 Volt
- Accuracy: +-3% RH
- Type: Digital
- Color: Black
- Display Type: LCD
- Input Sensor: Humidity Sensor
- Humidity: 1% ~ 99% RH\humidity measuring
- Error: ±3 percent rh
- Control range: 1 percent RH
- Power consumption:3w
- Output load: Ac 10a/220v
- Working temperature: 0°c – 80 °c
- Dimensions: 8 x 5 x 3cms
- Usage/Application: Air Humidity Controller Hygrostat Humidistat Humidification Dehumidification
Mh13001 220V Digital Air Humidity Control Controller Mh13001 220V Digital Humidity Control Controller Mh13001 220V Digital Humidity Control Controller Mh13001 220V Digital Humidity It includes a humidity controller sensor probe with cable, as well as a wide humidity measuring and regulating range. This humidity Capacitive Digital Temperature and Humidity Module is a composite temperature and humidity sensor that outputs a calibrated digital signal. An LCD is used to show the digital output. The red display has three “LED” digits that clearly indicate the complete temperature number (no decimal place).
Humidity sensors employ a high-precision capacitive faster chip that has the benefit of high reflectivity accuracy. It features a humidity measurement range of 1% to 99 percent RH, as well as a humidity control range of 1% RH. The parameters for the power outage permanent memory function have been specified in this module via the menu for humidification and dehumidification.
The Mh13001 220V Digital Air Humidity Control Controller is more precise, more accurate, and operates across a wider temperature/humidity range. However, as compared to AM2302, it is significantly larger and more costly. The use of specific digital module acquisition technology as well as temperature and humidity sensors ensures exceptional dependability and long-term stability of the products.
The humidity controller is controlled by four buttons below the display. The first button denotes “SET,” while the next two buttons + and – are used for menu navigation, raising or lowering settings, and Rst is similar to a “ON/OFF button.” Three green terminals are located on the rear of the humidity controller. “Relay switch” is on the left, “Power” is in the middle, and terminals for probe AM2302 are on the right. In addition, the Humidity controller sensor MH-13001 is located on the right side of the temperature controller at the bottom. It also has an active end that is roughly 80 cm long.

Related products
2000W SCR VOLTAGE REGULATOR
4 Pin Digital LCD Wood Moisture Meter Timber Damp Detector Tester 5% 40%
- Model:MD-4G
- Display: LCD Display
- Range:5%~40%
- Resolution:1%
- Single probe length:10mm
- Color: Gray
- Material: Plastic
- Power Supply:1 x 9V Battery (Not included)
- Measure moisture content of wood, bamboo, paper etc.
- Stable performance and quick response, the meter is really reliable.
- With data hold function and low battery indication
- Dimension: 123 x 65 x 23mm
- Weight: 78g
40A DC MOTOR SPEED REGULATOR PWM CONTROLLER 2000W
- Speed controller model: 40A PWM DC motor speed regulator
- Operating voltage: 10V TO 50V
- Peak current: 40A
- Control power: 0.01-2000W
- Quiescent current: 0.025A
- PWM regulation: 5-100%
- PWM frequency: 12KHz
- Operating temperature: -20 degree to 40 degree Celsius
- Stability in working
- High efficiency
- potentiometer used for speed adjustability
- Dimension: 9*5.1mm
- Weight: 95gm
6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle
- Operating voltage: 6 - 30V DC
- 1 Channel delay trigerred relay module
- Delay time: 0.1 second ~ 999 minutes
- Seven Segment Display
- Operating voltage: DC 6V-30V (supports micro USB 5V power supply)
- Trigger signal source: high-level trigger (3V-24V) signal ground and system to improve the system's anti-jamming capability (also short-circuit altogether)
- Output capability: it can control the device within DC 30V 5A or within AC 220V 5A
- Quiescent current: 20mA
- Operating current: 50mA
- Service life: more than 100,000 times
- Working temperature: -40°C-85°C
- With optocoupler isolation, enhanced anti-jamming capability, industrial grade circuit board, set parameters for memory after power failure.
- Dimension: 6.2 * 3.8 * 1.7cm
Digital LCD Indoor Temperature Humidity Meter Thermometer Hygrometer Gauge
- Material: Plastic
- Temperature range: -50 ° C to 70 ° C
- Measuring humidity range: 10% RH to 99% RH
- Humidity accuracy: 5%
- Moisture display resolution: 1% RH
- Accuracy of temperature: 1 ° C
- Operating voltage: 1.5 V or LR44 batteries (not included)
- Sampling period: 10 S
- Colour: Black
- Modern type indoor desk thermometer with hygrometer.
- One switchback of the thermometer that you can adust °C
- Ideal household decoration and ensure you the most desirable ambient temperature and humidity
- LCD dimension: approx. 40x22.5mm
- Dimension: approximately 48x28.5x15.2mm
Fan Wifi Controller
Motor Controller 24V for MY1016 350W
UC3843A Current Mode Controller IC
- High Performance Current Mode Controller
- Bias and Drive Voltages: 30V
- Total Power Supply and Zener Current: 30mA
- Output Current: 1A
- Reference Output Voltage: 5V
- Line Regulation Max: 20mV
- Load Regulation Max: 25mV
- Frequency: 52KHz
- Low Level Output Voltage: 0.1V
- High Level Output Voltage: 13.5V
- Startup Threshold Max: 9V
- Package: DIP-8

Reviews
There are no reviews yet.