I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
NE564 Phase Locked Loop IC
₹85.00 Original price was: ₹85.00.₹80.00Current price is: ₹80.00. inc. GST
- Phase-locked loop
- Power Dissipation: 600mW
- Maximum VCO frequency: 60MHz
- Lock Range: 70% of fo
- Capture Range: 30% of fo
- VCO Free-running Frequency: 5MHz
- Signal-to-noise ratio: 40dB
- Supply Current Max: 60mA
- Package: DIP-16
The NE564 designed as a versatile, high guaranteed frequency phase-locked loop designed for operation up to 50MHz. NE564 consists of a VCO, limiter, phase comparator, and post-detection processor. The NE564 function as a monolithic phase-locked loop with a post-detection processor. The use of Schottky clamped transistors and optimized device geometries extend the frequency of operation to greater than 50MHz. In addition to the classical PLL applications, the NE564 used as a modulator with a controllable frequency deviation.
This NE564 operates with single 5V supply TTL-compatible inputs and outputs Guaranteed operation to 50MHz. Moreover, the External loop gain control Reduced carrier feedthrough. Hence does not elaborate filtering needed in FSK applications. Meanwhile, this NE 564 used as a modulator Variable loop gain (externally controlled). Also High-speed modems FSK receivers and transmitters Frequency Synthesizers. This PLL manufactured in 16-Pin Plastic Small-Outline (SO) Package, 16-Pin Plastic Dual In-Line Package (DIP), and 16-Pin Plastic Dual In-Line Package (DIP).
The phase-locked loop (PLL) is one of the prominent and commonly used technology in the communication field. With the development of electronic technology toward digitalization, the phase-locked processing of signal must be realized in digital way. Therefore, more and more attentions are paid to the research and application of all digital phase-locked loops. This paper is an introduction about the essential background of PLL, the essential characteristics and structure of PLL, and therefore the basic principles of modulation and demodulation. It provides a concise application about the essential principle and main design process of modulation and demodulation of FSK signal, which are realized by using phase-locked loop chip NE564

Related products
120pcs 12 values 0.22UF-470UF Aluminum electrolytic capacitor assortment kit set pack
4 Pin RMC Connector
5-36v Switch Drive High-power MOSFET Trigger Module
- Operating Voltage: DC 5V - 36V;
- The trigger source: digital high-low (DC3.3V - 20V), can be connected microcontroller IO port, PLC interfaces, DC power, you can access the PWM signal, the signal frequency 0--20KHZ perfect support.
- Output capacity: DC 5V - 36V, at room temperature, continuous current 15A, power 400W! Lower auxiliary cooling conditions, the maximum current up to 30A.
- Applications: You can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps, solenoid valves, etc.. You can enter
- PWM, motor speed control, lamp brightness.
- Availability: unlimited switch
- Operating temperature: -40-85
- Dimension: 34mm x 17mm x 12mm
- The use of imported dual-MOS parallel active output, lower resistance, more current, strong power at room temperature, 15A, 400W, to meet the most use of the equipment
- Wide voltage, the perfect support for PWM
- Easily control high power devices
- Input PWM to achieve motor speed control, lamp brightness control
74LS540 High-Speed CMOS Logic Octal Buffer and Line Driver IC
AP Extension pigtail SMA female socket jack to UFL IPX Connector
APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A
- Input Voltage Range: 6-28V DC
- Output voltage: 5.3V ± 0.1V
- Maximum output current: 3A
- Maximum current: 90A
- Maximum voltage: 30V
- Supports from 2 cell to 6 cell battery.
- 6P cable can be directly connected to APM/Pixhawk flight control
- Additional 4P rows of pin-free to wire/PIN to connect to another flight control
- Voltage and current measurement configured for 5V ADC.
- Switching regulator outputs 5.3V and 3A max.
- Dimensions: 25mm x 21mm x 9mm
- Weight: 17gm
Capacitor Touch Dimmer, Constant Voltage LED Stepless Dimming, PWM Control Board
- Voltage range: 4V to 5V
- Maximum output current: 500mA
- Hole distance: 16 mm
- Aperture: 5 mm
- The lamp brightness can be adjusted by requirement, it is very to operate.
- It can touch in medium protection, such as glass, acrylic, plastic, ceramics, and so on, which is very safe.
- Anti power and phone interference, the EFT can reach above +/-2KV; the touch response sensitivity and reliability will not be affected by the close distance or multi-angle mobile phone interference.
- Dimming mode: Non-polar PWM dimming.
- PCB size: 23 x 20mm
Dual Micro USB 3.7v to 5V 2A Power Bank DIY 18650 LiPo Charger
- 4-level LED lamp display power, not working state intelligent automatic shutdown;
- The built-in lithium battery protection IC, over-current, under-voltage protection;
- Dual USB output ports.
- Dimensions: 68 x 34 x 9 mm (LxWxH)
- Weight: 10 gm
- Input port: MicroUSB (Andro)
- Input requirements: 5V constant voltage power supply can do charge input power, the most matching charger for 5v1a above
- Output port: USB
- Output parameters: 5V1A/5V2A
- Requirements for rechargeable batteries:
- Compatible Batteries: 18650 batteries, cell phone batteries, flat-panel batteries, MP3 batteries, etc. 3.7v-4.2V polymer Lithium battery,

Reviews
There are no reviews yet.