I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
NE564 Phase Locked Loop IC
₹85.00 Original price was: ₹85.00.₹80.00Current price is: ₹80.00. inc. GST
- Phase-locked loop
- Power Dissipation: 600mW
- Maximum VCO frequency: 60MHz
- Lock Range: 70% of fo
- Capture Range: 30% of fo
- VCO Free-running Frequency: 5MHz
- Signal-to-noise ratio: 40dB
- Supply Current Max: 60mA
- Package: DIP-16
The NE564 designed as a versatile, high guaranteed frequency phase-locked loop designed for operation up to 50MHz. NE564 consists of a VCO, limiter, phase comparator, and post-detection processor. The NE564 function as a monolithic phase-locked loop with a post-detection processor. The use of Schottky clamped transistors and optimized device geometries extend the frequency of operation to greater than 50MHz. In addition to the classical PLL applications, the NE564 used as a modulator with a controllable frequency deviation.
This NE564 operates with single 5V supply TTL-compatible inputs and outputs Guaranteed operation to 50MHz. Moreover, the External loop gain control Reduced carrier feedthrough. Hence does not elaborate filtering needed in FSK applications. Meanwhile, this NE 564 used as a modulator Variable loop gain (externally controlled). Also High-speed modems FSK receivers and transmitters Frequency Synthesizers. This PLL manufactured in 16-Pin Plastic Small-Outline (SO) Package, 16-Pin Plastic Dual In-Line Package (DIP), and 16-Pin Plastic Dual In-Line Package (DIP).
The phase-locked loop (PLL) is one of the prominent and commonly used technology in the communication field. With the development of electronic technology toward digitalization, the phase-locked processing of signal must be realized in digital way. Therefore, more and more attentions are paid to the research and application of all digital phase-locked loops. This paper is an introduction about the essential background of PLL, the essential characteristics and structure of PLL, and therefore the basic principles of modulation and demodulation. It provides a concise application about the essential principle and main design process of modulation and demodulation of FSK signal, which are realized by using phase-locked loop chip NE564

Related products
120pcs 12 value 1uF-470uF Electrolytic Capacitor Kit 1UF 2.2UF 3.3UF 4.7UF 10UF 22UF 33UF 47UF 100UF 220UF
120pcs 12 values 0.22UF-470UF Aluminum electrolytic capacitor assortment kit set pack
4 Pin RMC Connector
5-36v Switch Drive High-power MOSFET Trigger Module
- Operating Voltage: DC 5V - 36V;
- The trigger source: digital high-low (DC3.3V - 20V), can be connected microcontroller IO port, PLC interfaces, DC power, you can access the PWM signal, the signal frequency 0--20KHZ perfect support.
- Output capacity: DC 5V - 36V, at room temperature, continuous current 15A, power 400W! Lower auxiliary cooling conditions, the maximum current up to 30A.
- Applications: You can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps, solenoid valves, etc.. You can enter
- PWM, motor speed control, lamp brightness.
- Availability: unlimited switch
- Operating temperature: -40-85
- Dimension: 34mm x 17mm x 12mm
- The use of imported dual-MOS parallel active output, lower resistance, more current, strong power at room temperature, 15A, 400W, to meet the most use of the equipment
- Wide voltage, the perfect support for PWM
- Easily control high power devices
- Input PWM to achieve motor speed control, lamp brightness control
Capacitor Touch Dimmer, Constant Voltage LED Stepless Dimming, PWM Control Board
- Voltage range: 4V to 5V
- Maximum output current: 500mA
- Hole distance: 16 mm
- Aperture: 5 mm
- The lamp brightness can be adjusted by requirement, it is very to operate.
- It can touch in medium protection, such as glass, acrylic, plastic, ceramics, and so on, which is very safe.
- Anti power and phone interference, the EFT can reach above +/-2KV; the touch response sensitivity and reliability will not be affected by the close distance or multi-angle mobile phone interference.
- Dimming mode: Non-polar PWM dimming.
- PCB size: 23 x 20mm
GSM Antenna Dlenp 2dbi/3dbi Patch Antenna with SMA Male Connector
- GSM Antenna
- Gain: 2 to 3dbi
- Wire Length: 3 metre
- 3dbi Sticker Antenna
- GSM Antenna
- SMA Male Connector
- Frequency Range(MHz): 824-960/1710-1990Mhz
- Bandwidth (MHz): 136/280
- VSWR≤1.5
- Gain(dB): 2-3dbi
- Max Input power(W): 60W
- Input Impedance: 50 Ω
- Polarization Type: Vertical
- Cable Type: RG174
- Mounting Adhesive
- Net weight: 47g
Solid State Relay Module DC To AC SSR-40DA 3-32VDC/24-380VAC 40A
- Control mode: DC-AC
- Input voltage: 3-32V DC.
- Output voltage: 24-380V AC.
- Output current: 40A.
- Working voltage: 250V.
- Material: plastic + metal.
- Loading current: 40A
- Control current: 3-25mA DC
- On voltage: ≤1.5V AC
- One-off Time: ≤10ms
- Off Leakage Current: ≤2mA
- Dielectrics voltage-resistance: 2500VAC
- Environment temperature: -30 to +75
- Long service life and high reliability.
- Reduced electromagnetic interference.
- Highly reliable, compact size designed to offer users maximum simplicity.
TP5100 4.2v 8.4v Single Double Lithium Battery Charge Management Li-ion Battery Compatible 2A Charging Board
- Input voltage: 5-15V DC power supply.
- Charge status: full and unloaded blue lights, charging red.
- Double 8.4v / 4.2v lithium rechargeable single .
- Programmable charge current. 0. 1A-2A .
- Programmable steady precharge current 10% -100%.
- Wide operating voltage, maximum reach I8V.
- Red and green LED charge status indicator.
- Chip temperature protection, overcurrent protection, under voltage protection.
- Battery temperature protection, reverse battery shutdown, short circuit protection.
- Switching frequency 400Khz, usable inductance 20uH and more.
- PWR_ON Power battery for switching control.

Reviews
There are no reviews yet.