I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Back to products
PR53 215mm Trapezoidal Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
Original price was: ₹300.00.₹250.00Current price is: ₹250.00. inc. GST
PR34 2004 LCD Display Smart Controller W or Adapter for RAMPS1.4 Reprap 3D Printer
- RAMPS 1.4 2004 LCD Display intelligent controller.
- LED background light control circuit, a small function of the intelligent controller,
- With pin short time to decide on all LED turn or steering 30 seconds
- You can turn on the light time to do the long or short form of the adjustment TRIMM R4100K from 10 seconds to 2 minutes.
- Plug and play on the RAMPS, but need to modify the firmware to support.
- The product comes encoder parameter adjustment can be achieved, and the file selection print.
- With an SD card base on the back, put slicing file into the SD card and select the file on the LCD, then can be printing.
Description
The PR34 2004 LCD Display Smart Controller W or Adapter for RAMPS1.4 Reprap 3D Printer designed with an SD-Card reader, a rotary encoder, and a 2004 LCD display. This PR34 2004 LCD Display can be easily connect it to your RAMPS board using the “smart adapter”. After connecting this controller panel to your RAMPS, there is no need to use pc anymore. The 2004 LCD Smart Controller supplies power for your SD card. Moreover, all functions like calibration, axes movements performed by just using the rotary encoder on the Smart Controller. Thus the 3D designs printed without PC, just with a g-code design stored on the SD card.
This 2004 LCD display is 20 Character x 4 Line LCD display. Using the “smart adapter” included in the module, it can be easily connected to the Ramps board. LCD2004 LCD Display provides a simple and cost-effective solution for adding a 20×4 White on RGB Liquid Crystal Display into your project. And also display comes with 20 characters by 4 line display has a very clear and high contrast white text upon a blue background/backlight.
In this LCD controller, we can turn on the light time to do the long or short form of the adjustment TRIMM R4100K from 10 seconds to 2 minutes. And also the SD card base on the back put the slicing file into the SD card and select the file on the LCD, thus printing can be processed.
Reviews (0)
Shipping & Delivery
Related products
16*1 GREEN (LCD DISPLAY MODULE)
- Operating voltage: 5V
- Display format: 16 characters * 1 line
- Display mode: STN or FSTN
- Dot-matrix: 5*8 dots
- Character size: 3.07 * 6.56mm
- Character pitch: 77 * 6.56mm
- LCD driver IC: ST7066U
- 1/16 duty cycle
- Polarizer mode: Transmissive
- Each character build by 5*8 pixels
- Works on both 8-bit parallel interface
- Operating temperature: -20 degree to 70 degree Celsius
- Low Current consumption
- Alphanumeric display
- Dimension: 80*36*13.2mm
- Compact size and lightweight
16*2 GREEN (LCD DISPLAY MODULE)
- Input voltage: 4.7V TO 5.3V
- Operating voltage: 5V
- Current consumption: 1mA
- Input leakage current:1micro ampere
- HD44780 Equivalent LCD Controller/driver Built-In
- 4-bit or 8-bit MPU Interface
- Each character build by 5*8 pixels
- Consist of 2 rows with each row has 16 characters
- Operating temperature:0 degree to 50 degree Celsius
- Low Current consumption
- Green Backlight
- Works with almost any Microcontroller
- Alphanumeric display
- Compact size and lightweight
- Easy to interface
- Dimension: 69.5*14.5mm
16*2 WHITE (LCD DISPLAY MODULE)
- Input voltage: 4.7V TO 5.3V
- Operating voltage: 5V
- View angle: 6 o clock
- Current supply:1.1
- Maximum supply current:2.5
- 1/16 duty cycle
- Input leakage current:1micro ampere
- Chip on board IC
- Rise time:200 to 250ms
- Fall time: 300 to 350ms
- Controller: SPLC780D
- Each character build by 5*8 pixels
- Consist of 2 rows with each row has 16 characters
- Works on both 8 bit and 4 bit
- Operating temperature:0 degree to 50 degree Celsius
- Storage temperature: -10 degrees to 50 degree Celsius
- Low Current consumption
- Alphanumeric display
- Dimension: 69.5*14.5mm
- Compact size and lightweight
- Easy to interface
16×2 (1602) LCD Keypad Shield
- Operating Voltage:5V
- 5 Push buttons.
- RST button to reset Arduino program.
- Integrate a potentiometer for adjusting the backlight.
- Expanded available I/O pins.
- Blue light with white characters.
- Uses 4 Bit Arduino LCD Library
- Screen contrast adjustment
- Arduino Reset button
- The keypad consists of 6 keys select, up, right, down, left and reset.
- To save the digital IO pins, the keypad interface only uses one ADC channel.
- The key value is read out through a 5 stage voltage divider.
3D printer 128×64 Smart LCD controller for ramps 1.4
- RAMPS 1.4 LCD 12864 intelligent controller.
- With an SD card base on back.
- Large screen display 128×64 LCD (3.2″)
- SD card slot at the back, able to directly select a file and print
- The product comes encoder parameter adjustment can be achieved, and the file selection print
- Plug & play on the RAMPS, but need to modify the firmware to support.
- LCD 12864 Smart Controller fully supported by Marlin Firmware.
- Large screen display 128×64 LCD (3.2″)
- SD card slot at the back, able to directly select a file and print
- The product comes encoder parameter adjustment can be achieved, and the file selection print
- Plug & play on the RAMPS, but need to modify the firmware to support.
- LCD 12864 Smart Controller fully supported by Marlin Firmware.
CD4054 4 Segment Liquid Crystal Display Driver IC
- 4 Segment Liquid Crystal Display Driver With Strobed Latch Function
- Supply Voltage Range: 3 to 20V
- Input Current: ±10mA
- Power Dissipation: 200mW
- Low level Output Voltage: 0.05V
- High level Output Voltage Min.: 4.95V
- Low level Input Voltage Max.: 1.5V
- High level Input Voltage Min.: 3.5V
- Propagation Delay Time Max.: 800ns
- Package: DIP-16
Waveshare 10.1inch HDMI LCD (B) (with case) 1280×800 IPS
- IPS screen,1280×800 high resolution
- Capacitive touch control supports up to ten-points touch
- When works with Raspberry Pi, supports Raspbian, Ubuntu, single touch, and driver free
- When working as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver free
- Supports Banana Pi, Banana Pro, comes with Lubuntu, Raspbian images
- Supports BB Black, comes with Angstrom image
- HDMI interface for displaying, USB interface for touch control
- Supports 5-level backlight adjustment.
- Case Material: high-quality black Acrylic
- Comes with a back holder, 45degree tilt angle
- Dimensions: 18 x 10 x 9 cm
- Weight: 800gm
Reviews
There are no reviews yet.