I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Red – 2 Channel 3W Digital Power PAM8403 Class D Audio Amplifier Board USB 5V
₹90.00 Original price was: ₹90.00.₹50.00Current price is: ₹50.00. inc. GST
- Input Voltage: 2.5-5.5 V (USB power supply).
- Output Impedance: 4 ohm.
- Efficiency: 90%.
- Frequency Response: 150 Hz – 20 KHz.
- Input Impedance: 2 K ohm.
- A class D-type amplifier without a filter, low quiescent current, and low EMI.
- Good noise suppression.
- Input audio should be via sheilded wire.
- Dual channel stereo output 3 w + 3 w power.
- Works with 5v power supply.
- Can directly drive 4 /8 Ohm small speakers.
- When connects with a 4-ohm load and 5V power supply, the output power can be up to 3W.
- Low THD, low noise.
- Short circuit protectioN, thermal protection.
- Dimensions: 15 x 20 mm.
Out of stock
The Mini Digital Power Amplifiers PAM8403 digital amplifier board is a 2 channel 3W, Class AB power amplifier performance with Class D amplifier efficiency. It allows the device to drive the speaker directly, requiring no low pass output filters. As a result, save the system cost and PCB area. This module operates at a voltage range from 2.5V to 5.5V or by USB supply directly. This makes it ideal for adding the audio capability to our MP3, MP4 player. PAM8403 audio amplifier offers high efficiency and high-quality sound reproduction. PAM8403 is a filter less module, as a result, it offers low Quiescent Current and low EMI. With the same no of external components, the PAM8403 digital amplifier board performs much better than class-AB amplifiers. This dual-channel stereo output with 3 w + 3 w power can directly drive the 4 Ohm /8 Ohm small speakers.
. PAM8403 provides a high amplification 3W of power at efficiencies greater than 90% with both system shutdown and mute control. The mute switch used to mute the power amplifier output when the switch pressed or the mute port shorted. Â PAM8403 audio amplifiers are available as SOP -16 pin packages. A 0.47uf ceramic capacitor reduces the noise caused by the power supply coupling into the output drive signal. This module features low Quiescent Current, low EMI with short circuit, and thermal shutdown protection. These are also used for a long time steady usage as it features low harmonic distortion. As this 3W dual audio amplifier designed with special inline architecture enhances anti-noise capability and reduces RF interference.

Related products
2.1 Channel Class D Amplifier Board 50+50+100W
CA-3110 Dual Channel Stereo Class Amplifier Board
Digital PAM8610 2*15w dual channel stereo class amplifier board 12V
LM1876 Dual 20W Audio Power Amplifier IC
- Dual 20W Audio Power Amplifier with Mute and Standby Modes
- Spike Protection
- Minimal amount of external components necessary
- Quiet fade-in/out mute mode
- Standby-mode
- Isolated 15-lead TO-220 package
- THD+N at 1 kHz at 2 x 15W continuous average output power into 4Ω or 8Ω: 0.1% (max)
- THD+N at 1 kHz at continuous average output power of 2 x 20W into 8Ω: 0.009% (typ.)
- Standby current:Â 4.2 mA (typ.)
LM386 LOW VOLTAGE AUDIO POWER AMPLIFIER
- Supply Voltage: 4-15V
- Analog input voltage 0.4V (maximum)
- Quiescent Power: 24mW @ 6V
- Voltage Gain: 20 to 200 (26dB to 46dB)
- PSRR: 50dB
- Speaker impedance: 4Ω
- On board power indicator
- On board speaker wiring block
- On board 10k variable resistor, for volume adjustment
- 200 multiplier benefit circuit design
- Available in 8-Pin PDIP,SOIC and VSSOP packages
- Used in AM & FM radio amplifiers, music players, power amplifiers etc.
PAM8406 Digital Amplifier Board 5W×2 Volume Adjustable D class module
- Working voltage:3.5 - 5V, limit operating voltage 5.5V
- Excellent noise suppression can hear any noise without connecting input audio
- Dual-channel stereo, 5v power supply is needed that can input 5w+5w power, to drive 4, 8 little speaker directly
- Volume adjustment of the right and left channel
- The unique non-LC filter Class-D digital power board used computer USB to charge.
- Dual-panel wiring solves the ground potential balance and avoids the crosstalk between channels caused by wiring
- Super miniature design
- Used machine to weld whole plate.
- Weight: 15 grams.
TDA7266 Dual Audio Channel 7W + 7W Amplifier Module
- Operating Voltage Range: 3 V to 18 V
- Power supply:14W
- On-board TDA7266 stereo audio amplifier chip
- Output: dual-channel 7W + 7W
- On-board 5.08 mm terminal blocks for the left and right audio channels
- On-board potentiometer for volume adjustment
- DC power jack
- Minimum external components
- On board TDA7266 audio power amplifier chip, double track 7W + 7W, suitable for 4-8 Euro, 5-15W speakers.
- The main pin has led chip, convenient external device control, onboard 2 road 5.08 (mm) distance between two p terminal, around a track connection output respectively.
- The on-board dial potentiometer, output size can adjust the volume.
- Support in DC, terminal blocks, row needles 3 power input mode, the default for the DC,
- Standby and mute functions
- Short-circuit protection
- Thermal overload protection
- Dimension:45mm * 33mm * 30mm
- Weight:7g

Reviews
There are no reviews yet.