I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-14%
JF-0630B DC 24 V 300mA 10mm 6N Push Pull Solenoid Electromagnet
Original price was: ₹1,200.00.₹900.00Current price is: ₹900.00. inc. GST
KFL08 Zinc Alloy Pillow Block Flange Bearing 8mm Inner Diameter Flange Bearing
Original price was: ₹250.00.₹200.00Current price is: ₹200.00. inc. GST
SK8 Linear Rail Shaft Guide Support Bracket For 3D Printer Bearing CNC Stepper Motor
Original price was: ₹210.00.₹180.00Current price is: ₹180.00. inc. GST
- Model: SK8.
- Shaft ID: 8mm
- Mounting Hole Diameter: Approx. 5.5 mm
- Center Hole Distance: Approx. 32 mm
- Material: Steel
- Light and simple design
- High torque capacity
- High rigidity
- High positioning accuracy, high rotating accuracy
- High efficiency
- Riding stability
- Dimensions: 14 x 42 x 32 mm
- Weight: 30gm
Description
SK8 8mm linear bearing rail support designed explicitly to support Hard Chrome Plated Rods in CNC Routers, CNC Engraving machines, 3D Printing Machines, Cashew Nut Shelling Machines, Pick and Drop Machines, Robots for Industrial Automation.
SK8 is a 8mm Linear bearing rail support designed specifically for CNC 3D Printer. These are widely used on hardened steel shafts makes them ideal for small CNC applications. Moreover, this Metal Linear Bearing Block Unit does not need any oil. They are Self-lubricating and Dust-proof. The slots through which the motor comes in contact with the hole in the right place to mound the stepper motor. The use of MS steel in the bracket provides good strength and makes it sturdy. Thus the bracket is ready to hold and take a load of the stepper motor. It fits accurately and firmly so that the motor can be fixed in the way the user needs. Thus it provides high flexibility and modularity in design.
This SK8Â offers a wide range of applications in the fields such as in 3D printer, CNC, electronic equipment home appliances, low noise and high-speed electric motors, automotive components and digital three-dimensional coordinate measuring equipment and other precision equipment or special machinery industry. This module features smooth moving, low friction, high rigidity, and long life. This is quite economical, easy to maintain, thus improve efficiency and save energy.
Reviews (0)
Shipping & Delivery
Related products
1.75mm HIPS 3D Printer Filament Black Wanhao
- Colour: Black
- Diameter: 1.75mm
- Material: HIPS
- Print Temperature(Degree Celsius): 230 - 270 Deg C
- Melting Temp: 230 - 270 Deg C
- Highly Detailed & Quality Outputs
- Tried and Tested by Makenica.com
- Compatible with any FDM 3D Printer.
- HIPS is stronger than PLA High Impact Polystyrene
- 1kg spools on black reel
- Highly Detailed & Quality Outputs. Every time.
- Tried and Tested by Makenica.com
- Compatible with any FDM 3D Printer.
- HIPS is stronger than PLA
- Easy to post-process.
Creality 3D CR-10S DIY 3D Printer Kit 300*300*400mm Printing Size
- Printing size: 300*300*400mm
- Printing type: FDM (Melting touch stack molding technology)
- Body structure: Patent technology V-Slot aluminum bearing
- Nozzle diameter: Standard 0.4mm(can be changed to 0.3/0.2mm)
- Filament diameter: 1.75mm
- Plug: Default EU plug
- Print speed: Max.: 200mm / s, Normal: 80mm / s
- Each accuracy: 0.05-0.4mm (adjustable)
- Power supply: Input 110-220V switchable, output 24V
- Actual power: 160-200W
- Printing accuracy: ±0.1mm
- Environmental requirement: 10-30°C, humidity 20-50%
- Filament materials: PLA, ABS, TPU, Copper, Wood, Carbon Fiber, Gradient Color etc.
- Software supporting: PROE, Solid-works, UG, 3d Max, Rhino 3D design software, etc.
- Format: STL, OBJ, G-Code, JPG
- Printing method: SD card(off-line), contact to the PC(on-line)
- Operating system: Linux, Windows, OSX
- Operating software: CURA, Repetier-Host, simplify 3D
- Machine size: 490*600*615 mm
- Package size: 540*640*310 mm
- Machine net weight: 10.3kg
- Package weight: 14kg
GT2 Open Timing Belt for 3D Printer and CNC
- Pitch: 2mm
- Material: Neoprene Rubber With Fiberglass Core
- Width: 6mm
- Total Length: 1M
- Shape: Open Loop
- Core Wire Material: Glass Fiber
- Precision registration and timing with no loss of high torque carrying capability
- Minimal vibration and chordal effect
- Positive slip proof engagement
- Wide speed range, especially important when the entire speed range is developed from a single source
- Virtually no elongation (stretching) due to wear
- Power transmission efficiency is not lost with the use
- A clean operation, no need for lubrication
- Reduced noise.
- Long, dependable trouble-free service.
MACH3 interface board
- Compatible Stepper Motor Driver - Max 5 2-phase Microstep controllers
- Driver type - Pulse and Direction signal control
- Wide input voltage range: 12-24V, and with anti-reverse function.
- Output 0-10V analogue voltage for the inverter to control the spindle speed.
- Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software.
- USB power supply and peripherals power phase are separate to protect computer security.
- All the signals are to-isolate which can protect your computer security.
- 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc.
- Wide input voltage range: 12-24V, and with anti-reverse function.
- One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.
- Maximum support 5-axis stepper motor driver controllers
- Output 0-10V analogue voltage for the inverter to control the spindle speed.
- All the way to the relay output port, control spindle switch. Output port P17 mouth.
- One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.
- Weight - Approx. 75g
- Dimensions - 90 * 70 * 20mm
NEMA 23 10.1 kg-cm
- Operating Voltage : 2.3 Volts
- Step Angle : 1.8°
- Holding Torque : 10.1 kg-cm
- Supply Current (A) : 2.8 Ampere/Phase
- Number of Leads : 4
- Inductance : 2.2 mH/Phase
- Resistance : 0.83 Ohm
- Rotor Inertia : 275 gm-cm2
- Weight (gm) : 650
- Detent Torque (kg-cm) : 0.36
- Frame Size (mm) : 57 x 57
- Inductance Accuracy : ±20%
- Resistance Accuracy : ±10%
- Shaft Diameter (mm) : 6.35
- Shaft Length (mm) : 20.6
- Step Angle Accuracy : ±5%
- Comparably more powerful than NEMA17 motors.
- The input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- It provides good starting, stopping, and reversing.
- Control of this motor is less costly because of the exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.
PR34 2004 LCD Display Smart Controller W or Adapter for RAMPS1.4 Reprap 3D Printer
- RAMPS 1.4 2004 LCD Display intelligent controller.
- LED background light control circuit, a small function of the intelligent controller,
- With pin short time to decide on all LED turn or steering 30 seconds
- You can turn on the light time to do the long or short form of the adjustment TRIMM R4100K from 10 seconds to 2 minutes.
- Plug and play on the RAMPS, but need to modify the firmware to support.
- The product comes encoder parameter adjustment can be achieved, and the file selection print.
- With an SD card base on the back, put slicing file into the SD card and select the file on the LCD, then can be printing.
Ramps 1.6 For 3D Printer Parts
- Input voltage: 12V.
- Power: 200W.
- Patch MOS tube: B55NF06.
- Ramps 1.6 is a 4-layer board.
- Can be extended to LCD and other parts.
- There are heater and fan MOSFET outputs and 3 thermistor interfaces
- Support motor drivers: support A4988 DRV8825 and other motor drivers(support five motor drivers Simultaneously).
- 5A additional security and component protection fusion.
- Heated bed controls additional 11A fuses.
- Applied to 5 Pololu stepper drive board.
- Design of Pololu plate pin socket can be easily replaced or removed for future design.
- I2C and SPI pins are available for future expansion.
- Servo connectors are used for connecting limit stops, motors and light-emitting diodes.
- LED will light when the heater has output, choose 2 motors to connect to Z Prusa Mendel.
- Dimension: 101.5 * 60.5mm
Reviews
There are no reviews yet.