I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Speech Recognition System HM2007
₹4,550.00 Original price was: ₹4,550.00.₹4,500.00Current price is: ₹4,500.00.
- Input Voltage:9 to 15 V DC
- Use a commonly available 12V 500ma DC Adapter
- Output Data :8 bits at 5V Logic Level
- Any microcontroller like 8051, PIC or AVR can be interfaced to data port to interpret and implement specialized applications
- Self-contained standalone speech recognition circuit
- User-programmable
- Up to 20-word vocabulary of duration two-second each
- Multi-lingual
- Non-volatile memory back up with 3V battery on board. Will keep the speech recognition data in memory even after power off.
- Easily interfaced to control external circuits & appliances
The speech recognition system HM2007 designed as a completely assembled and easy-to-use programmable speech recognition circuit. Here Programmable means that you can train the words (or vocal utterances) you want the circuit to recognize. This module comes with an 8-bit data out and can be interfaced with any microcontroller for further development. These HM2007 widely used in applications such as controlling home appliances, robotics movements, Speech Assisted technologies, Speech to text translation.
HM2007 designed as a CMOS voice recognition LSI (Large Scale Integration) circuit with an analog front end, voice analysis, regulation, and system control functions. This HM2007 chip is capable of providing options of recognizing either the .96 second word length (40-word vocabulary). Or the 1.92-second word length (20-word vocabulary). The basic principle of voice recognition involves that when the speech or words spoken by any human generates vibrations in the air, known as sound waves. These continuous or analog waves further digitized, processed, and then decoded to appropriate words and then appropriate sentences.
A speech exists in the form of an acoustic waveform, i.e. signal carrying message information. A microphone converts this acoustic waveform to analog electrical signals. The Analog to Digital converter converts this analog signal to digital samples by taking precise measurements of the wave at discrete intervals. Digital Signal Processor using FFT technique converts this digitalized time-domain signals to the frequency domain. In other words, the digitized signal segmented into small parts of frequency amplitudes. Each segment or frequency corresponds to the different sounds made by human beings.

Related products
1Kg Load cell Electronic Weighing Scale Sensor
- Capacity: 1KG
- Rated output(MV/V): 2.0±0.15
- Accuracy class: C2
- Maximum number of load cell verification intervals(N max): 2000
- Minimum number of load cell verification intervals(Vmin): E Max/5000
- Combined error(%RO): <±0.030
- Creep(%RO/30min): 0.03
- Temperature effect on sensitivity(%RO/°C): 0.0016
- Temperature effect on zero(%RO/°C): 0.003
- Zero balance(%RO): 1.0
- Input resistance(O): 402±6
- Output resistance(O): 350±3
- Insulation resistance(MO<50V>): 5000
- Recommended excitation voltage(V): 10~15
- Compensated temperature range(°C): -10~+40
- Operating temperature range(°C): -35~+80
- Safe overload(%RO): 150
- Ultimate overload(%RO): 200
- Load cell material: Aluminium
- Connecting cable: ø4.2*350mm
- Dimensions :Â 10.92 x 9.52 x 0.51 cm
- weight:10gm
40A DC MOTOR SPEED REGULATOR PWM CONTROLLER 2000W
- Speed controller model: 40A PWM DC motor speed regulator
- Operating voltage: 10V TO 50V
- Peak current: 40A
- Control power: 0.01-2000W
- Quiescent current: 0.025A
- PWM regulation: 5-100%
- PWM frequency: 12KHz
- Operating temperature: -20 degree to 40 degree Celsius
- Stability in working
- High efficiency
- potentiometer used for speed adjustability
- Dimension: 9*5.1mm
- Weight: 95gm
5pcs x NFC Sticker tags 13.56MHz ISO14443A 25mm Ntag213 RFID NFC tag
- Chip: Ntag213.
- Physical capacity: 180 bytes.
- Usable capacity: 144 bytes.
- Protocol: ISO14443A.
- Working frequency: 13.56 MHZ.
- Reading and writing distance: 1 to 5 cm.
- Reading and writing time: 1 to 2 ms.
- Working temperature: -20 to 55 degrees, the humidity of 90%.
- Erase times : > 100000 times.
- Data storage: > 10 years.
- Reading time: 100000 times.
- Diameter: 25mm.
- Materials: PE self-adhesive + coated paper.
- Manufacturer programmed 7-byte UID for each device
- Preprogrammed Capability container with one-time programmable bits
- Field programmable read-only locking function
- ECC-based originality signature
- 32-bit password protection to prevent unauthorized memory operations
- NFC Forum Tag 2 Type compliance
6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle
- Operating voltage: 6 - 30V DC
- 1 Channel delay trigerred relay module
- Delay time: 0.1 second ~ 999 minutes
- Seven Segment Display
- Operating voltage: DC 6V-30V (supports micro USB 5V power supply)
- Trigger signal source: high-level trigger (3V-24V) signal ground and system to improve the system's anti-jamming capability (also short-circuit altogether)
- Output capability: it can control the device within DC 30V 5A or within AC 220V 5A
- Quiescent current: 20mA
- Operating current: 50mA
- Service life: more than 100,000 times
- Working temperature: -40°C-85°C
- With optocoupler isolation, enhanced anti-jamming capability, industrial grade circuit board, set parameters for memory after power failure.
- Dimension: 6.2 * 3.8 * 1.7cm
DC 12V Thermoelectric Peltier/TEC based Refrigeration Cooler kit
- Semiconductor Chilling Plate: TEC1-12706
- Size: 40 * 40 * 3.75mm
- Internal Resistance: 2.1~2.4Ω
- Temperature Difference: 67°C Above
- Rated Voltage: 12V(Vmax. 15V, Starting Current 5.8A)
- Working Current: Imax.=4~4.6A(Rated 12V)
- Refrigeration Power: Max. 50~60W
- Working Environment: -55~83°C
- Sealing Process: Standard 704 silicon rubber sealing all sides
- Fan: DC 12V 0.15A
- Conduction Module Size: 60 * 45 * 21mm
- Radiator Size: 116 * 100 * 23mm
- Fan Size: 90 * 90 * 25mm
- This Kit Having TEC-12706(Max 6Amp Current) Module.
- Recommended Power supply 12V 5Amp to 10Amps
- Do not use/test/operate TEC without Heatsink & Fan.
- The conduction cool module can frost when the temperature is under -25°C.
Kapton Polyimide Heat Resistant/High Temperature/Thermal Tape/SublimationTape 12mm
- Color: Tawny
- Substrate material: Polyimide polymers film
- Glue Type: Silicone
- Substrate material thickness: 0.025mm
- Thickness with adhesive: 0.05mm
- Heat resistance: about 280°C
- Size:1/2" x 100ft (13mm*30m)
- Elongation: 35 %
- Temperature Range:-73°C – 260°C (-99°F - 500°F)
- High insulation, high temperature resistance, acid and alkali-resistance, low electrolysis, mechanically sound, crocking resistance, tear-resistance, without rest on surface when tear.
- Ideal for protecting sensitive printed circuit board (PCB) components,great for sublimation, HTV, heat press and heat transfer.
- Also extensive use as electrical insulation for transformer, motor, coil, capacitor and frequency conversion power supply in electronic industry.
LOAD CELL 5Kg
- Capacity: 5Kg
- Rated output(MV/V): 2.0±0.15
- Accuracy class: C2
- Maximum number of load cell verification intervals(N max): 2000
- Minimum number of load cell verification intervals(Vmin): E Max/5000
- Combined error(%RO): <±0.030
- Creep(%RO/30min): 0.03
- Temperature effect on sensitivity(%RO/°C): 0.0016
- Temperature effect on zero(%RO/°C): 0.003
- Zero balance(%RO): 1.0
- Input resistance(O): 402±6
- Output resistance(O): 350±3
- Insulation resistance(MO<50V>): 5000
- Recommended excitation voltage(V): 10~15
- Compensated temperature range(°C): -10~+40
- Operating temperature range(°C): -35~+80
- Safe overload(%RO): 150
- Ultimate overload(%RO): 200
- Load cell material: Aluminium
- Connecting cable: ø4.2*350mm
- Dimensions :3.45 x 2.4 x 0.9 inches
- weight:25gm
TEC1-12715
- Model number: TEC1-12715
- Operating Voltage: 12V
- Maximum Voltage- Vmax (V) : 15V
- Maximum Current- Imax (A) : 15A
- Maximum Power : 230 W
- Power Cord: 100mm
- Internal resistance: 1.98 Ohm +/- 10%
- Life expectancy: 200,000 hours
- Failure rate based on long-time testing: 0.2%.
- Easy transition between the hot side to the cool side and vice-versa just by reversing the polarity of the supply.
- Quality tested cooling cells.
- Solid-state, vibration-free, noise-free.
- Simple to install and operate.
- Should use with a heat sink
- Temperature: 138°C
- Wire Insulation Material: Teflon
- Dimension: 40x40x4.0mm
- Weight: 29g

Reviews
There are no reviews yet.