I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
STC-1000 220V AC All Purpose Digital Temperature Controller Module
₹1,100.00 Original price was: ₹1,100.00.₹999.00Current price is: ₹999.00. inc. GST
- Power supply: 220VAC±10%, 50/60Hz.
- Sensor Type: NTC Sensor
- Resolution: 0.1°C.
- Accuracy: ±1°C (-50 – 70°C).
- Sensor error delay: 1 minute.
- Power consumption: ≤3W.
- Front panel size : 75 x 34.5mm
- Mounting size: 71x 29mm.
- Sensor length: 1m (include the probe).
- Temperature Measuring Range: -50 to 90°C
- Storage temperature : -30 – 75°C;
- Relative humidity : 20% – 85%
- Output Relay Capacity : Heating: 10A/220VAC; Cooling: 10A/220VAC
- Mini temperature controller.
- With a clear LED display for better readability.
- Dual heating and cooling control.
- Automatic over-temperature alarm
- Relay output.
- Dimension: 75x 34.5x 85mm
This Temperature-controlled thermostat switch widely used to control the heating/cooling of an object. This is performed with the help of the NTC sensor to detect the temperature. This STC-1000 220V AC All-Purpose Digital Temperature Controller Thermostat Module offers high accuracy and précised measurements at a low cost. This module consists of two output ports where the equipment connected to heat or cool the test system.
It offers a high-temperature control precision of 0.1℃ with an accuracy of ±1°C (-50 – 70°C). It is capable of measuring temperature over the range -50℃ to 99℃ performed by NTC sensors. NTC Thermistors defined as non-linear resistors, that vary their resistance characteristics with temperature. Thus the NTC resistance will decrease as the temperature increases. The on-board  LED display shows the temperature results clearly. This module used in a wide range of applications as it can be directly installed or embed in industrial control equipment panels, more conveniently and quickly.
Moreover, it features a stainless steel material probe of length 1m which makes it waterproof and is anticorrosive. And also all the delicate and sensitive components related to the module enclosed in ABS flame retardant housing as environmental protection. This module controls the temperature by setting the temperature setting value and the difference value, and thus Temperature calibration performed. Finally, the Auto Switch on the module switches the modes between cool and heat.
Application:
- Used in potential chemical contamination or electrical interference
- Used in Nuclear energy control systems, combustion systems, railroad systems, aviation systems
- Medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations
- Systems, machines, and equipment that could present a risk to life or property
- Temperature-controlled system such as Domestic freezer, water tanks, refrigerator, industrial chiller etc

Related products
4000W AC CONTROLLER
5000W Thyristor Voltage Regulator, Adjust Light Speed Temperature
6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle
- Operating voltage: 6 - 30V DC
- 1 Channel delay trigerred relay module
- Delay time: 0.1 second ~ 999 minutes
- Seven Segment Display
- Operating voltage: DC 6V-30V (supports micro USB 5V power supply)
- Trigger signal source: high-level trigger (3V-24V) signal ground and system to improve the system's anti-jamming capability (also short-circuit altogether)
- Output capability: it can control the device within DC 30V 5A or within AC 220V 5A
- Quiescent current: 20mA
- Operating current: 50mA
- Service life: more than 100,000 times
- Working temperature: -40°C-85°C
- With optocoupler isolation, enhanced anti-jamming capability, industrial grade circuit board, set parameters for memory after power failure.
- Dimension: 6.2 * 3.8 * 1.7cm
Acrylic case for XH-W1209 temperature controller
DHT21 AM2301 Digital Temperature Humidity Sensor module SHT11 SHT15 Arduino
- Power: DC 3.3-5.2V
- Humidity: 0~99.9% RH
- Temperature: -20 ~ 60℃
- Precision: ±3% RH, ±0.5 ℃
- Output: Digital (1 wire)
- Accurate, durable and high quality
- 4 pin package
- Ultra-low power
- No additional components
- Excellent long-term stability
- All calibration, digital output
- Completely interchangeable
- Long distance signal transmission
- Relative humidity and temperature measurement
- Dimension: 60 x 27 x 14mm
PWM 10A DC MOTOR SPEED CONTROL
- Working voltage:12V to 40V DC
- Maximum output power: 400 watt
- Current:10A, 100watt
- Static current:0.02A
- PWM duty cycle:10% - 100%
- PWM frequency:13KHz
- With reverse polarity protection, high current protection
- High efficiency and torque
- Control voltage over-voltage protection
- Low heat generation
- Material used: metal
- Dimensions:6*5.6*3cm
- SIZE: 64gm
UNI T Infrared Thermometer UT30R
- Measurement range: 32 to 45 ° C.
- Resolution: 0.1 ° C.
- Test distance: 5-10 cm
- Accuracy : ± 0.3°C
- Measurement repeatability : 0.3°C
- Response time : 500 ms
- Optical measuring range : 5.5μm ~ 14.0μm
- Simple, fast and accurate IR thermometer
- Flashing arm at high temperature (more than 37.2 ° C)
- Single button operation
- LCD display with backlight for dark condition
- Auto data hold for 8s
- Â Auto power off
- Low voltage indication
- Option of Celsius/Fahrenheit
- Power-off memory function

Reviews
There are no reviews yet.