I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
STC-1000 220V AC All Purpose Digital Temperature Controller Module
₹1,100.00 Original price was: ₹1,100.00.₹999.00Current price is: ₹999.00. inc. GST
- Power supply: 220VAC±10%, 50/60Hz.
- Sensor Type: NTC Sensor
- Resolution: 0.1°C.
- Accuracy: ±1°C (-50 – 70°C).
- Sensor error delay: 1 minute.
- Power consumption: ≤3W.
- Front panel size : 75 x 34.5mm
- Mounting size: 71x 29mm.
- Sensor length: 1m (include the probe).
- Temperature Measuring Range: -50 to 90°C
- Storage temperature : -30 – 75°C;
- Relative humidity : 20% – 85%
- Output Relay Capacity : Heating: 10A/220VAC; Cooling: 10A/220VAC
- Mini temperature controller.
- With a clear LED display for better readability.
- Dual heating and cooling control.
- Automatic over-temperature alarm
- Relay output.
- Dimension: 75x 34.5x 85mm
This Temperature-controlled thermostat switch widely used to control the heating/cooling of an object. This is performed with the help of the NTC sensor to detect the temperature. This STC-1000 220V AC All-Purpose Digital Temperature Controller Thermostat Module offers high accuracy and précised measurements at a low cost. This module consists of two output ports where the equipment connected to heat or cool the test system.
It offers a high-temperature control precision of 0.1℃ with an accuracy of ±1°C (-50 – 70°C). It is capable of measuring temperature over the range -50℃ to 99℃ performed by NTC sensors. NTC Thermistors defined as non-linear resistors, that vary their resistance characteristics with temperature. Thus the NTC resistance will decrease as the temperature increases. The on-board  LED display shows the temperature results clearly. This module used in a wide range of applications as it can be directly installed or embed in industrial control equipment panels, more conveniently and quickly.
Moreover, it features a stainless steel material probe of length 1m which makes it waterproof and is anticorrosive. And also all the delicate and sensitive components related to the module enclosed in ABS flame retardant housing as environmental protection. This module controls the temperature by setting the temperature setting value and the difference value, and thus Temperature calibration performed. Finally, the Auto Switch on the module switches the modes between cool and heat.
Application:
- Used in potential chemical contamination or electrical interference
- Used in Nuclear energy control systems, combustion systems, railroad systems, aviation systems
- Medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations
- Systems, machines, and equipment that could present a risk to life or property
- Temperature-controlled system such as Domestic freezer, water tanks, refrigerator, industrial chiller etc

Related products
4000W AC CONTROLLER
DHT11 MODULE
- Operating Voltage: 3.5V to 5.5V
- Operating current: 0.3mA (measuring) 60uA (standby)
- Output: Serial data
- Temperature Range: 0°C to 50°C
- Humidity Range: 20% to 90%
- Resolution: Temperature and Humidity both are 16-bit
- Accuracy: ±1°C and ±1%
- Low power consumption.
- The module can detect the surrounding environment of the humidity and temperature
- High reliability and excellent long-term stability
- The output from the digital output
- Has fixed bolt hole and easy installation
DHT21 AM2301 Digital Temperature Humidity Sensor module SHT11 SHT15 Arduino
- Power: DC 3.3-5.2V
- Humidity: 0~99.9% RH
- Temperature: -20 ~ 60℃
- Precision: ±3% RH, ±0.5 ℃
- Output: Digital (1 wire)
- Accurate, durable and high quality
- 4 pin package
- Ultra-low power
- No additional components
- Excellent long-term stability
- All calibration, digital output
- Completely interchangeable
- Long distance signal transmission
- Relative humidity and temperature measurement
- Dimension: 60 x 27 x 14mm
DHT22 Sensor
DS18B20 PROBE
- Usable temperature range: -55 to 125°C (-67°F to +257°F)
- 9 to 12-bit selectable resolution
- Uses 1-Wire interface- requires only one digital pin for communication
- Unique 64 bit ID burned into a chip
- Multiple sensors can share one pin
- ±0.5°C Accuracy from -10°C to +85°C
- Temperature-limit alarm system
- Query time is less than 750ms
- Usable with 3.0V to 5.5V power/data
- Each pin uses a heat-shrinkable tube to prevent short circuit, internal sealing glue.
- Stainless steel tube encapsulation waterproof moistureproof prevents rust.
- Stainless steel tube 6mm diameter by 30mm long.
- Contains DS18B20 temperature sensor.
- Uses 1-Wire interface- requires only one digital pin for communication.
- Unique 64 bit ID burned into the chip.
- Multiple sensors can share one pin.
- Temperature-limit alarm system.
- Without the external components, the unique single bus.
Floating Straight Automatic Water Level Control For Water Tank-14014449MG
- Automatic Control, Low Self-Complementary Water, Water Full Automatic Stop.
- Four Intakes, Large Volume Of Water.
- Beautiful Appearance, Small Size, Practical, Simple Installation.
- Without Electricity, Easy To Use, Long Life, Low Failure Rate, Saving Water Resources.
- Working Pressure Range: 0.2-10Kg.
- Applicable Medium: Clean Water.
- Applicable Medium Temperature: ≤70degree C
- Resistance to High-Temperature to Medium Temperature: 70degree to 120degree C
- Material: Nylon Pa66, Stainless Steel Screws, Food Grade Rubber.
- Diameter: Approx. 46Mm / 1.81Inch.
- Dimension: Approx. 83*71mm
PWM 10A DC MOTOR SPEED CONTROL
- Working voltage:12V to 40V DC
- Maximum output power: 400 watt
- Current:10A, 100watt
- Static current:0.02A
- PWM duty cycle:10% - 100%
- PWM frequency:13KHz
- With reverse polarity protection, high current protection
- High efficiency and torque
- Control voltage over-voltage protection
- Low heat generation
- Material used: metal
- Dimensions:6*5.6*3cm
- SIZE: 64gm

Reviews
There are no reviews yet.