I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
View cart “XL4015 5A STEP DOWN MODULE” has been added to your cart.
-29%
PIC Development Board
₹2,000.00 ₹1,500.00 inc. GST
DC 12V 3W BLDC WATER PUMP
₹600.00 ₹550.00 inc. GST
Water Purifier Adapter 24V 2.5A 60W
₹700.00 ₹500.00 inc. GST
Related products
3V To 5V 1A USB Charger Step Up Boost Module
- Module properties: Non-isolated step-up module (BOOST).
- Input voltage: 2.5-6V.
- Output voltage: 4-12 V (Adjustable (need to replacing the resistance to adjustable), the default 5 v).
- Output current: 1000mA (Max).
- Efficiency: 92% (Max) (the higher the input voltage, the higher the efficiency).
- Switching frequency: 1MHz.
- Output ripple: 20mV (MAX).
- Operating temperature: Industrial (-40°c to +85°c).
- Voltage regulation: ±2.5%.
- Short circuit protection: None
- Input: IN + postive, IN - negative.
- Output: USB output.
- Dimension: 3 x 1.3 x 0.8cm.
LM2596 3A STEP DOWN MODULE
- Module properties: non isolated constant voltage module
- Rectification : non synchronous rectification
- Input voltage: 4.5V-35V
- Output voltage: 1.3V-30V
- Output current: 3A maximum
- Conversion efficiency: 92%
- Switching frequency: 150KHz
- Output ripple: 50mV 20M bandwidth
- Load regulation: +/- 0.5%
- Voltage regulation:” +/-2.5%
- Operating temperature: -40 degree to 85 degree Celsius
- Dimension: 48*23*14mm
XL4015 5A STEP DOWN WITH DISPLAY
- Module nature: non-isolated buck module ( BUCK )
- Input voltage: 4-38V
- Output voltage: 1.25-36V
- Output current: 0-5A, it is recommended to use within 4.5A
- 14 Digital I/O Pins
- Output power: It is recommended to use within 75W, please add a heat sink if it exceeds 50W
- Working temperature: -40 degree to + 85 degrees
- Working frequency: 180KHz
- Conversion efficiency: up to 96% Load adjustment rate: S ( I ) ≤ 0.8%
- Voltage adjustment rate: S ( u ) ≤ 0.8%
- LED to indicate power status
- Short circuit protection
- Over-temperature protection
- Dimension: 54mm * 23mm wide *18mm
MT3608 2A MAX DC-DC STEP UP POWER MODULE BOOSTER
- Input voltage: 2V-24V
- Output voltage: 5V-28V
- Output current: 2A
- Efficiency: 96%
- Fixed switching frequency: 1.2MHz
- Integrated 80mohm power MOSFET
- Internal compensation
- Automatics pulse frequency modulation mode
- Operating temperature: -40 degree to 90 degree Celsius
- Low-cost converter module
- Simple to adjust to get desired increase I voltage
- Can source a good amount of current
- Dimension: 37*17*7mm
- Weight: 4gm
Dc 4.5V-40V to 5V 2A USB Charger DC-DC Step-Down Buck Converter Voltmeter
- Input voltage: DC 4.5 ~ 40V.
- Output voltage: 5V (when the input voltage is between 6.5V ~ 40V).
- Output current: 2A.
- The voltmeter has an automatic calibration function.
- With reverse connection protection.
- With overheat protection and short circuit protection.
- The voltmeter has an automatic calibration function.
- With reverse connection protection.
- With overheat protection and short circuit protection.
- High efficiency and low ripple.
- With USB power indicator light.
LM2577 Boost power module
- Input voltage range : 3-34V DC
- Output voltage range : 4-35v DC adjustable
- Output current:3A
- Voltmeter range:0 to 40V,error +-0.1v
- Multiple output regulator.
- One button to switch input and output voltage display.
- Power-down memory function.
- Press the button for 3 seconds can turn OFF/ON the LED display.
- Multiple output regulator.
- When adjusting the blue potentiometer, please use a multimeter to monitor the voltage
- Rotating Clockwise can raise the voltage while rotating counter clockwise could lower the voltage
XL4015 5A STEP DOWN WITH HEAT SINK
- Module nature: non-isolated buck module ( BUCK )
- Input voltage: 4-38V
- Output voltage: 1.25-36V
- Output current: 0-5A, it is recommended to use within 4.5A
- 14 Digital I/O Pins
- Output power: It is recommended to use within 75W, please add a heat sink if it exceeds 50W
- Working temperature: -40 degree + 85 degrees
- Working frequency: 180KHz
- Conversion efficiency: up to 96% Load adjustment rate: S ( I ) ≤ 0.8%
- Voltage adjustment rate: S ( u ) ≤ 0.8%
- Power indicator
- Short circuit protection
- Over-temperature protection
- Dimension: 54mm * 23mm wide *18mm
5V USB OUTPUT CONVERTOR 7V-24V TO 5V/3A, DC-DC STEP DOWN BUCK KIS3R33S MODULE
- Module nature: non isolated buck
- Input voltage: 7V-24V DC
- Output voltage: 5V DC
- Output current: 4A
- Conversion efficiency:96% (max)
- Switching frequency: 340KHz
- Output ripple:30mv (max)
- Load regulation: +/-0.5%
- Voltage regulation: +/-2.5%
- Operating temperature: -40 degree to +85 degree Celsius
- Rectification: nonsynchronous rectification
- Short circuit protection
- Dimensions:60*21*14mm
- Weight: 150gm
Reviews
There are no reviews yet.