I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-52%
XL4015 5A STEP DOWN MODULE
Original price was: ₹700.00.₹450.00Current price is: ₹450.00. inc. GST
XL4015 5A STEP DOWN WITH DISPLAY
Original price was: ₹599.00.₹500.00Current price is: ₹500.00. inc. GST
XL6009 4A DC to DC BOOST CONVERTER
Original price was: ₹250.00.₹120.00Current price is: ₹120.00. inc. GST
- Module Properties: Non-isolated boost (BOOST)
- Rectification: Non-Synchronous Rectification
- Input Voltage Range: 3V ~ 32V
- Output Voltage Range: 5V ~ 35V
- Input Current: 4A (max), no-load 18mA
- Conversion efficiency: <94%
- Switching frequency: 400KHz
- Output Ripple: 50mV (the higher the voltage, the greater the current, the greater the ripple)
- Load Regulation: ± 0.5%
- Voltage Regulation: ± 0.5%
- Operating Temperature: -40degree ~ +85 degree
- Dimensions: 43mm * 21mm * 14mm
Description
The XL6009 4A DC to DC boost converter steps up the input voltage from 3V ~ 32V to any high output voltage from 5V ~ 35V at a continuous current of 4 A depending on the input-output voltage settings. Since it is a boost convertor the output voltage will be always higher than the input voltage. XL6009 4A DC to DC boost converter provides excellent line and load regulation, as it is capable of driving 4A load current. Under the condition when the output current exceeds 2.5A, or output power greater than 10W, a heat sink needs to be added to avoid thermal damages. XL6009 IC is available in fixed output voltages of 3.3 V, 5V, 12V, and an adjustable output version.
XL6009 DC-DC step-up power module booster is a low-cost module with over current and current limiting features. A built-in 4A efficient MOSFET switches enable to achieve an efficiency of up to 94%. Thus XL6009 offers better results and a low ripple factor. This DC-DC Module is designed based on IC XL6009E1 which provides a high-performance step-up switching current (BOOST) module. The XL6009 operates at a higher switching frequency of 400 kHz and allows the use of small-capacity filter components compared with low frequency switching regulators. Thus module allows to reduce the overall board size to be smaller and thus helps for space-saving. The XL6009 DC to DC buck-boost converter module is the upgraded version of the LM2577 based module.
Pin Description of XL6009 Power module Board:
- IN+: Positive input (Unregulated or Regulated)
- IN-: Negative input (Ground)
- OUT+: Positive Output (Regulated)
- OUT-: Negative Output (Ground)
Reviews (0)
Shipping & Delivery
Related products
3V To 5V 1A USB Charger Step Up Boost Module
- Module properties: Non-isolated step-up module (BOOST).
- Input voltage: 2.5-6V.
- Output voltage: 4-12 V (Adjustable (need to replacing the resistance to adjustable), the default 5 v).
- Output current: 1000mA (Max).
- Efficiency: 92% (Max) (the higher the input voltage, the higher the efficiency).
- Switching frequency: 1MHz.
- Output ripple: 20mV (MAX).
- Operating temperature: Industrial (-40°c to +85°c).
- Voltage regulation: ±2.5%.
- Short circuit protection: None
- Input: IN + postive, IN - negative.
- Output: USB output.
- Dimension: 3 x 1.3 x 0.8cm.
ADJUSTABLE POWER MODULE 12A 24V BUCK TURN 12V LED DRIVER WITH CURRENT CHARGING INDICATOR
- Input voltage: 7V to 32V
- Output voltage: 0.8V to28 V (continuously adjustable)
- Output current: 12A
- Constant current range: 0.2-12A
- Conversion efficiency: up to 95%
- Operating frequency: 300KHz
- No load current: 20 milli ampere(24V to 12V)
- Dynamic response speed: 5% 200us
- Operating temperature: -40 degree to +85 degree Celsius
- Load regulation: +/- 1% (constant pressure)
- Voltage regulation: +/-1%
- Output ripple: 20M bandwidth
- Power module: QS-2405CCBD
- Two led indicators, light red indicates charging and light green indicates fully charged
- Used in-car power supply, battery charging, low voltage systems etc.
- Short circuit protection
- Dimension: 65*47* 23.5mm
Dc 4.5V-40V to 5V 2A USB Charger DC-DC Step-Down Buck Converter Voltmeter
- Input voltage: DC 4.5 ~ 40V.
- Output voltage: 5V (when the input voltage is between 6.5V ~ 40V).
- Output current: 2A.
- The voltmeter has an automatic calibration function.
- With reverse connection protection.
- With overheat protection and short circuit protection.
- The voltmeter has an automatic calibration function.
- With reverse connection protection.
- With overheat protection and short circuit protection.
- High efficiency and low ripple.
- With USB power indicator light.
DPS3003 Constant Voltage Current Step-down Programmable Power Supply Module
- Input voltage range: 6V to 40V
- Output voltage range: 0V to 32V
- Output current: 0 to 3.000A.
- Output power range: 0-96W.
- Open size: 71mm*39mm.
- Output voltage resolution: 0.01V.
- Output current resolution: 0.001A.
- Output Voltage accuracy: ± (0.5% + 1 digits)
- Output Current accuracy: ± (0.5% + 2 digit)
- Dimension: 79*43*41mm
- Weight: about 90g.
LM317 DC-DC STEP DOWN CONVERTOR
- Output current: 1.5A(min), 2.2A(typical)
- I/O voltage differential (v1-v0): 40V DC
- Adjustable output voltage range: 1.2V-37V
- Voltage input: 4.2V-40V
- Switching frequency: 100 MHz
- 80 db ripple rejection
- Input method: VIN input is positive, GND input negative
- Output method: VOUT output positive, GND output negative
- Operating temperature: 0 degrees to 125 degree Celsius
- Dimension: 35.6*16.8mm
MP1584EN MINI 3A DC-DC CONVERTOR
- Input voltage: 4.5V-28V
- Output voltage: 0.8V-20V
- Output current: rated 3A maximum
- Switching frequency: 1MHz
- Output ripple: less than 30mV
- Efficiency: 96%
- Operating temperature: -40 degree to 85 degree Celsius
- Accuracy: +/-0.5%
- Internal soft-start
- Ceramic capacitor stable
- Internally set current limit without current sensing resistor
- Dimension:22*17*4mm
XL4015 5A STEP DOWN WITH HEAT SINK
- Module nature: non-isolated buck module ( BUCK )
- Input voltage: 4-38V
- Output voltage: 1.25-36V
- Output current: 0-5A, it is recommended to use within 4.5A
- 14 Digital I/O Pins
- Output power: It is recommended to use within 75W, please add a heat sink if it exceeds 50W
- Working temperature: -40 degree + 85 degrees
- Working frequency: 180KHz
- Conversion efficiency: up to 96% Load adjustment rate: S ( I ) ≤ 0.8%
- Voltage adjustment rate: S ( u ) ≤ 0.8%
- Power indicator
- Short circuit protection
- Over-temperature protection
- Dimension: 54mm * 23mm wide *18mm
YHDC SCT013-000 100A SWITCHING TYPE CURRENT TRANSFORMER
- Non-invasive current transformer
- Input current: 100A
- Frequency: 50Hz-150KHz
- Core material: Ferrite
- External material: ABS
- Suitable for lighting equipment, current measurement, AC motors, air compressors, and protection
- Two forms of output current
- Dielectric strength 6000V AC/1min
- Mechanical strength: not less than 100 times during opening and closing
- UL94-V0 flame retardant property
- Non linearity +-3% (10%-120% rated input current)
- Output plug: 3.5mm
- Working temperature: -25 degree TO 70 degree Celsius
- Dimension: 60*30*20mm
Reviews
There are no reviews yet.