8 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor + Controller
HUB MOTOR SPECIFICATIONS:
- Motor type: brushless gearless.
- Rated Voltage: 24V.
- Rated Power: 350W.
- Wheel Size: 8"
- Rated speed: 28 km/h.
- Rated efficiency: >=80%.
- Weight: 3.5kg.
- Open Size: 108mm.
- Brake type: Drum.
- Waterproof Grade: IP65.
- Voltage: 24V.
- Wattage: 24V 350W.
- Throttle: 1-4V.
- Short voltage protect: 31.5±0.5V/42±0.5V.
- Color: silver.
- Dimension: 105 x 65 x 32mm
- Casing material: Aluminium.
8 MHz 3 Pin Ceramic Crystal Oscillator
8 Pin RMC Connector
8.2nf 2000V DC Box Capacitor
8045(8×4.5) SF Propellers 2CW+2CCW-pair
- Length: 8″.
- Pitch: 4.5″.
- Weight: 14 gm.
- Shaft Diameter: 5Â mm.
- Total Length: 8 inch / 220 mm.
- Material: Glass Fiber Nylon
- Comes with thin and wide blades
- 8045(80×4.5) SF Propellers Black features an epoxy resin cover.
- Quick to release, quick to attach
- New design propellers, with greater aerodynamic efficiency, good lifting capacity.
- Dimensions: 30 x 6 x 4 cm
- Weight: 26 gm.
8051 Microcontroller IC
- Boolean Processor
- Bit-Addressable RAM
- Program Memory: 4Kx8 ROM
- RAM: 128 x 8 RAM
- No of Timers: 2 x 16-bit
- Interrupts: 5
- Package: PDIP
- Compatible with MCS-51® Products
- 4K Bytes of In-System Programmable (ISP) Flash Memory – Endurance: 1000 Write/Erase Cycles
- 0V to 5.5V Operating Range
- Fully Static Operation: 0 Hz to 33 MHz
- Three-level Program Memory Lock
- 32 Programmable I/O Lines
- Full Duplex UART Serial Channel
- Low-power Idle and Power-down Modes
- Interrupt Recovery from Power-down Mode
- Watchdog Timer
- Dual Data Pointer
- Power-off Flag
- Fast Programming Time
- Flexible ISP Programming (Byte and Page Mode)
80C31 Microcontroller IC
- 8051 Central Processing Unit
- Memory addressing capability
- Power control modes:
- CMOS and TTL compatible
- Three speed ranges at VCC = 5V
- Three package styles
- Extended temperature ranges
- Dual Data Pointers
- Second DPTR register
- Security bits:
- Encryption array—64 bytes
- 4 level priority interrupt
- 6 interrupt sources
- Four 8-bit I/O ports
- Full–duplex enhanced UART
- Programmable clock out
- Asynchronous port reset
- Low EMI (inhibit ALE)
- Wake-up from Power Down by an external interrupt (8XC51)
80C52 Microcontroller IC
- Internal Memory
- ROM:8K x 8-bits
- RAM:256 x 8-bits
- External Memory Addressing
- Up to 64K Program Memory Space
- Up to 64K Data Memory Space
- Timer
- Two 16-bit Timer/Counters
- Interrupt Source
- Six Interrupt Sources
- Two-Level Interrupt priority
- Boolean Processor(Single-bit Logic)
- Full Duplex UART
- I/O ports
- Four 8-bit Ports
- Two Types of Power Saving Mode
- Idle Mode
- Power Down Mode
- Operating Volage:5V
- Operating Frequency:12MHz
- Package Type
- 40-pin PDIP
- Programmable clock out
- Â Asynchronous port reset
- Â Low EMI (inhibit ALE and slew rate controlled outputs)
- Â Wake-up from Power Down by an external interrupt
- CMOS and TTL compatible
- 4 level priority interrupt
- Memory addressing capability – 64k ROM and 64k RAM
82C55 CMOS Programmable Peripheral Interface
- CMOS Programmable Peripheral Interface
- High speed and low power consumption due to 3m silicon gate CMOS technology
- 3 V to 6 V single power supply
- Full static operation
- Programmable 24-bit I/O ports
- Bidirectional bus operation (Port A)
- Bit set/reset function (Port C)
- TTL compatible
- Compatible with 8255A-5
82C79 Microcontroller IC
- Programmable Keyboard/Display Interface
- Simultaneous Keyboard Display Operation
- Scanned Keyboard Mode
- Scanned Sensor matrix mode
- Strobed Input Entry Mode
- Built-in 8-Character FIFO or 64 bit Sensor RAM
- Programmable 2-key Lockout or N-key Rollover with contact debounce
- Built-in 16x8 bit Display RAM
- Programmable scan timing
- Extend operating temperature range -400C to +850C