EP2C5T144 Altera Cyclone II FPGA Mini Development Board
- Onboard the EP2C5T144 chip.
- EPROM chip configuration using EPCS4, the size of 4Mbit.
- Onboard 50M active patch crystal (Crystal Slaughter halfback).
- Power supply with a largemouth outlet, single 5V power supply.
- Board has a power indicator and resets the switch.
- Onboard 3 SMD LED, the LED test can be done an experiment, more experiments using lead to complete.
- More IO ports and clock pins through the pin leads through these interfaces can be extended to any memory and peripherals.
- Board using a high-quality tantalum capacitor power filter.
- Support NiosII embedded CPU development.
- Board Dimension (LxWxH) mm: 72 x 52 x 13mm.
- Weight: 26gm.
Unite MY6812 24VDC 150W, 2750 RPM Electric Motor (Chain)
12 V 50W Solar Panel
- Output Power: 40 Watts
- Operating Voltage: 12 Volt
- Panel Technology: Poly Crystalline
- Performance Warranty:25 Years
- Wattage (Wp): 40
- Voltage at Max Power: 19.25 volts
- Current at Max Power: 2.08 amps
- Open Circuit Voltage: 22.5volts
- Short Circuit Current: 2.22A
- Number of cells: 36
- High conversion speed, high-efficiency output.
- Excellent low light effect.
- A+ Grade, anti-PID Poly Crystalline cell
- Cell Conversion efficiency > 16%
- Dimensions: 285 x 350 x 22mm
- Weight: 3.5 Kg
Ardupilot Mega APM 2.8 Flight Controller
- Model: APM 2.8
- Input Voltage (V): 12-16 V.
- Processor: ATMEGA2560 and ATMEGA32U-2
- Micro SD card slot: No.
- Arduino Compatible
- MPU6000 : 3-Axis MEMS Gyroscope + accelerometer
- High-performance Barometer upgraded to MS5611-01BA03, from Measurement Specialties.
- Support hundreds of 3D waypoints
- Full mission scripting with point-and-click desktop utilities
- Two-way telemetry and in-flight command using the powerful MAVLink protocol
- Powerful Ground Control Software
- Supports full "hardware-in-the-loop" simulation with Xplane and Flight Gear
- On-board 4 Megabyte Data flash chip for automatic data logging.
- Optional off-board GPS, an uBlox LEA-6H module with Compass.
- Dimensions: 70 x 45 x 15mm
- Weight: 70gm
3/4 solenoid valve
ULink2 ARM Emulator Programmer firmware Support MDK5.0 Cortex-M4 SWD
48v 500W BM1418ZXF Motor Controller
- Rated Voltage: 48 Volt DC.
- Rated Power: 500W.
- Maximum Current: 30 Amps.
- Level Brake: low.
- Current limited: 30A±0.5A.
- Efficiency: ≥83%.
- Consumption: <1.5W.
- Turn The Voltage: 1-4.2V.
- Phase Angle: 120 degrees.
- Includes attachments for motor, accelerator, brake, battery, battery charging, brake light, power lock
SanDisk SDDD3-256G-I35 256 GB Pen Drives (Black, Silver)
- High-speed USB 3.0 performance with up to 150Mbps file transfer from drive to computer
- Retractable design with dual micro-USB and USB 3.0 connectors
- SanDisk Memory Zone application (available on Google Play) lets you easily manage your photos and videos
- High-speed USB 3.0 for super-fast file transfers of up to 150MB/s
- For any queries, please contact_us on: [18001205899/18004195592]
- Compatible with OTG-enabled Android devices
CJX2s-2511 AC Contactor
TC544A Temperature controller
DC Gearless 500 Watt Motor for E-bike
- Brushed Motor Permanent Magnet
- Speed: 2500 rpm
- Rated Power: 500W
- Rated Voltage: 24v
- Current Draw (Rated): 27.4A
- Current Draw (No Load): 2.5A
- Rated Torque: 1.9 N.M.
- Rated Speed: 2500 RPM
- Efficiency: Greater than 75%
- Number of teeth: 11, Pitch 6.35 #25 Chain
- Diameter: 4 1/4"
- Length (no shaft): 5 1/4"
- Length (with shaft): 6 1/4"
- Weight: 4.1kg
Fingerprint Scanner TTL GT511C3 – 3.3V to 6V
- Model: GT-511C3
- Operating Voltage(VDC): 3 to 6
- CPU: ARM Cortex M3 Core (Holtek HT 32F2755)
- Sensors: Optical
- Image Size: 202 x 258 Pixel
- Resolution: 450 DPi
- Effective Scanning Area(mm): 20 x 16
- False Acceptance Rate (FAR): 0.001%
- False Rejection Rate(FRR): < 0.1%
- Operating Temperature : -20°C ~ +60°C
- Default Baud Rate: 9600bps
- High-Speed, High-Accuracy Fingerprint Identification using the Smack Finger 3.0 Algorithm
- Read and Write Fingerprint Templates and Databases
- Simple UART protocol (Default 9600 baud)
- Capable of 1:1 Verification and 1:N Identification
- High-accuracy & high-speed fingerprint identification technology.
- Works well with dry, moist, or rough fingerprints.
- 200 fingerprints storage.
- Easy one-touch enrolment.
- Dimensions(mm): 37 x 17 x 9.5
- Weight: 6gm