PICkit 3.5 Compatible Programmer with USB Cable and Jumper Wire- PIC Kit
- Type: Debugger/Programmer
- Tool/Board Application: Debugging/Programming
- MCU Supported Families: Flash-based PIC MCUs
- Core Architecture: PIC, dsPIC
- IC Product Type: In-Circuit Debugger
- USB (Full speed 12 Mbits/s interface to host PC)
- Real-time execution
- MPLAB IDE compatible
- Built-in over-voltage/short circuit monitor
- Firmware upgradeable from PC/web download
- Supports low voltage to 2.0 volts (2.0v to 6.0v range)
- Diagnostic LEDs (power, busy, error)
- Read/write program and data memory of the microcontroller
- Erase of program memory space with verification
- Freeze-peripherals at breakpoint
- Program up to 512K byte flash with the Programmer-to-Go
- Easy to use Windows-based programming
- USB Interface
PICKIT-3 Programmer
- Full-speed USB support using Windows standard drivers
- Real-time execution
- Processors run at maximum speeds
- Built-in over-voltage/short circuit monitor
- Low voltage to 5V (1.8 to the 5V range)
- Read/write program and data memory of the microcontroller
- Diagnostic LEDs (power, active, status)
- Read/write program and data memory of the microcontroller
- 1Erase of all memory types (EEPROM, ID, configuration, and program) with verification
- Peripheral freeze at the breakpoint.
- Program up to 512K byte flash.
PICKIT2 Microcontroller USB Programmer PIC KIT2 Burner
- Supported Device Families: PIC10F,PIC112F, PIC16F,PIC18F,PIC24
- Programs all current 8-, 16-, and 32-bit Flash PIC microcontrollers.
- Includes the UART Tool and Logic Tool microcontroller development utilities.
- With a portable USB power source, PICkit 2 will program the downloaded code into a PIC Microcontroller
- High-quality PCB FR4 Grade with FPT Certified
PIEZO VIBRATION CAPACTIVE AMPLIFIER
PIEZO Vibration Sensor
- Flexible PVDF Piezo Polymer Film
- Flex, Touch, Vibration and Shock measurements
- Voltage Sensitivity (open-circuit, baseline): 1.1 V/g.
- Charge Sensitivity (baseline): 260 pC/g.
- Upper Limiting Frequency (+3 dB): 42 Hz.
- Resonance Frequency: 75 Hz.
- Voltage Sensitivity (open-circuit, at resonance): 6 V/g.
- Wide dynamic range：001Hz~1000MHz
- Laminated for higher voltage output
- Breadboard friendly leads.
- Standard grove socket
- Adjustable sensitivity
- Withstands High Impact
- Operating Temperature: 0ºC to 85ºC
- Storage Temperature: -40ºC to 85 ºC
- Dimensions: 6.9 x 3.9 x 0.8 cm
- Weight: 10 Grams
Piezoelectric Transducer – High Sensitivity & Reliable Performance
Pin Type Panel Lock (Silver)
Pink ABS 1.75 mm 1 KG Filament-Wanhao
- Material: ABS
- Color: Pink
- Material Diameter: 1.75mm
- Printing Temperature: 220° to 230°C
- Roundness Accuracy: +/- 0.5mm +/- 0.5mm
- Density: 1.31g/cm3 1.01g/cm3
- Mounted: Spool Mounted
- Net weight: 1kg
- Packaging Vacuum-sealed with desiccant to protect the filament from humidity
- Highly Detailed & Quality Outputs.
- Tried and Tested by Makenica.com
- Compatible with any FDM 3D Printer.
- ABS is stronger than PLA
- Easy to post-process.
- Environment friendly – ISO 9001 and ROHS certified
Pink PLA 1.75 mm 1 KG Filament-Wanhao
- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Lower melting temperature
- Good flow properties
- Little odor development
- Less risk of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary Printing Settings:
- Best Printing Temperature：200-220℃
- Bed Temperature：0-70℃
- Printing Speed：30~90mm/s
- Movement Speed ：90~150mm/s
PIR Motion Sensor – Ceiling Mounted (Thin Design)
Technical Specifications
-
Sensor Type: Passive Infrared (PIR)
-
Mounting: Ceiling (Flush Mounted)
-
Detection Angle: 360°
-
Detection Range: Up to 6–8 meters
-
Operating Voltage: AC 220–240V, 50/60Hz
-
Load Capacity:
-
Incandescent: Up to 800W
-
LED / CFL: Up to 300W
-
-
Time Delay: Adjustable (10 sec – 7 min approx.)
-
Ambient Light Control: <3–2000 Lux (Adjustable)
-
Material: ABS Plastic
-
Color: White
PIR Motion Sensor – Wall Hanging
PIR Motion Sensor Concealed LED Light Connect Upto 500W (Natural White)
 PIR Motion Sensor with Concealed LED Light is a lighting device that combines a motion sensor and an LED light. Here are some details about this product:
- Function: The PIR Motion Sensor is designed to detect motion in its vicinity and automatically turn on the concealed LED light when motion is detected. It is commonly used as a security feature or for convenience in areas such as hallways, staircases, or outdoor spaces.
- Motion Sensor: The PIR (Passive Infrared) motion sensor detects changes in infrared radiation emitted by objects in its detection range. When it senses motion, it sends a signal to the LED light, triggering it to turn on. This helps to conserve energy by only activating the light when needed.
- LED Light: The PIR Motion Sensor features a concealed LED light with a power rating of 7 watts. The LED technology offers energy efficiency, longevity, and good illumination.