AD590 Temperature Transducer IC
- 2-Terminal IC Temperature Transducer
- Linear current output: 1 μA/K
- Wide temperature range: −55°C to +150°C
- Probe-compatible ceramic sensor package
- 2-terminal device: voltage in/current out
- Laser trimmed to ±0.5°C calibration accuracy (AD590M)
- Excellent linearity: ±0.3°C over full range (AD590M)
- Wide power supply range: 4 V to 30 V
- Sensor isolation from case
- Operating Voltage:30V
PIR SENSOR ROUND
E Bike Twist Throttle Grip Accelerator
Product Description
This product is E-Bike throttle and It is used as input to control motor. It is similar to the scooter accelerator available in the market. It features linear control over E-Bike motor and lets you change the speed of the vehicle according to your requirement. It obtains a direct connection with the E-Bike Controller Circuitry through the wire attached to it.
440V AC Brake Coil
SE-D09 Contactor Coil
Cup Type Heating Element
800SQ-A Analog Timer
Mini OSD W/ KV Team MOD For Racing F3 Naze32 Flight Controller RC Drone
- NO DC/DC converter, hence less heating
- FTDI cable compatible pinout
- Standard 6-pin ISP header
- Two LED indicators
- ATmega328P with Arduino bootloader
- MAX7456 monochrome on-screen display
- Pad for an Analog or Digital PWM RSSI signal
- Pad for the connection of a Current Sensor
- ATmega328P with Arduino bootloader
- Standalone, or with APM / Flip / Flip32+ flight controllers
- These modifications allow direct connection of two batteries (up to 4S)
- This hardware takes the hardware mods for this firmware and builds them into an RTF solution.
- This Board can be used just as a normal OSD for APM or it can be used with MWC KV Team Mod.
- Two independent power sections with an LED indicator on each.
- Solder jumpers for combining the power sections
- Solder jumper for PAL video option
- +5V 500mA regulator for up to +12V supply input
- Exposed test points for HSYNC and LOS ATmega328P with Arduino bootloader.
- Dimension: 16 x 16mm
Mini Data Logger Module Logging Shield for Raspberry Pi/Arduino
- SD card interface works with FAT16 or FAT32 formatted cards.
- 3V level shifter circuitry prevents damage to your SD card.
- A real-time clock (RTC) keeps the time going even when the Arduino is unplugged.
- Included libraries and example code for both SD and RTC, means you can get going quickly.
- Prototyping area for soldering connectors, circuitry or sensors.
- Onboard 3.3V regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run.
- Works with Arduino UNO, Duemilanove, Diecimila, Leonardo or ADK/Mega R3 or higher.
- ADK/Mega R2 or lower are not supported.
- Dimension: 68 x 53 x 23mm
Afr-2000 G1/4” Air Compressor Water Filter with Regulator Air Tool Cleaning
- Model: AFR2000 (AFR is the model, 2000 refers to the port size)
- Operating Fluid: Air
- Joint pipe bore: G 1/4"
- Range of Adjustable Pressure: 0.05-0.99 MPa
- Adjustable Pressure: 0.99 MPa
- Ensured Pressure Resistance: 1.5 MPa
- Operating Temperature Range: 5℃-60℃
- Filter Grade: 40 µ
- Capacity of Body: 15 cc
- Gauge caliber: G1 / 8
- Material: Metal, plastic
- Discharge water automatically
- Lightweight, small size, easy installation, and maintenance
- No matter the size of the inlet pressure and flow fluctuations, always maintain a stable outlet pressure
- Dimension: 6.29 x 2.75 x 2.75 inch
150mm 6 inch LCD Digital Electronic Vernier Caliper
- Measuring range: 0–100 mm.
- Resolution: 0.1mm.
- Repeatability: 0.1mm.
- Accuracy: + 0.1 mm.
- Maximum measurement speed: 1m/s.
- Power: 1 x 1.5V SR44 (silver oxide cell) battery
- Material: Carbon Fiber
- Internal, external and height dimensions can be easily and accurately measured.
- Zero setting in any position.
- With easy to read large LCD display.
- Handy conversion chart at the back.
- Ideal tool for a broad range of industrial and automotive applications.
- Dimension: 240 x 80 x 12mm
L298P Motor Shield motor driver
- L298P based Arduino motor driver shield
- Operating Voltage 5V to 12V
- Motor controller L298P, Drives 2 DC motors or 1 stepper motor
- The logical part of the input voltage VD: 5V
- Driven part of the input voltage VS: VIN Input 6.5 ~ 12V, PWRIN 4.8 ~ 35V input
- The logical part of the work current Iss:<36mA
- Driven part of the operating current Io:<2A
- Current sensing 1.65V/A
- Free running stop and brake function
- Maximum power dissipation: 25W (T = 75 Celsius)
- Max current 2A per channel or 4A max (with external power supply)
- Control signal input level: High 2.3V
- Onboard Bluetooth interface, you can directly plug, no wiring required.
- The board with L298P motor drive chip, directly with the motherboard digital I/O port (D10, D11, D12, D13), without cumbersome wiring.
- Onboard buzzer (D4), you can set the reverse alarm ringtones.
- D2, D3, D5, D6, D7, D9 are not occupied by the digital interface.
- A 0 – A 5 six analogue interfaces.
- Forward and Backward steering are indicators