Showing 2893–2904 of 3358 results

Socket Adapter Plate Board for 8 Pin Nrf24L01 Wireless Module

Original price was: ₹250.00.Current price is: ₹150.00. inc. GST
  • Used with NRF24L01 wireless module
  • Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
  • Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
  • Allows for easy connection to nRF24L01+ modules
  • Small power on SMD LED indicator
  • On-Board Voltage Regulator:
- Voltage Regulator Input Voltage (connected to VCC): 4.8V to 12V -Voltage Regulator Input Voltage Max: 15V (we recommend staying below 12V)
  • Dimension: 15.3 x 11.5 x 1.2 cm
  • Weight: 10 Grams

SOIC16 1 16 PIN SMD TO DIP

SOIC16 (16-Pin) SMD to DIP adapter for easy prototyping and testing of surface-mount ICs on breadboards.

SOIC28 WIDE 1 28PINS SMD TO DIP

SOIC28 wide 28-pin SMD to DIP adapter for easy prototyping and testing of SOIC surface-mount ICs on breadboards.

Soil Moisture Sensor

Original price was: ₹200.00.Current price is: ₹175.00. inc. GST
  • Operating voltage: 3.3V to 5V Operating Current: 5mA.
  • Dual output mode, analogue output and digital output
  • Analogue output is more accurate
  • Fixed bolt hole for easy installation
  • Onboard power indicator (red) and digital switching output indicator (green)
  • LM393 comparator chip
  • Panel PCB Dimension: Approx.3cm x 1.5cm
  • Soil Probe Dimension: Approx. 6cm x 3cm
  • Cable Length: Approx.21cm
  • Dimensions: 98 x 23 x 4.mm
  • Weight (gm): 15

Solar Charge Controller 12v/24v 10A

Original price was: ₹1,050.00.Current price is: ₹975.00. inc. GST
  • Nominal Battery Voltage: 12V/24V
  • Maximum output current:10A
  • Maximum Input Power: 120W
  • Charge stage: 4
  • Adjustable voltage regulation: No
  • The regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL
  • Battery cable should be as short as possible to minimize loss

Solar Charge Controller 12v/24v 40A

Original price was: ₹1,500.00.Current price is: ₹1,300.00. inc. GST
  • High efficiency: your batteries are charged quickly.
  • Capacity for solar panel configurations of up to 3600 Wp.
  • Suitable for AGM, gel, wet and Mastervolt Lithium Ion batteries.
  • Fast and flexible setting of battery type.
  • Battery temperature sensor for long lifespan.
  • Automatic 12 V/24 V/48 V detection.
  • Switchable output.
  • Noiseless operation.
  • LCD display.
  • Fully protected against overtemperature, overload, high/low battery voltage, high/low PV voltage, short circuit and reverse polarity.

Solar Charger Controller for Solar Panels

Technical Specifications

  • System Voltage: 12V / 24V (Auto Detect)

  • Charging Method: PWM / MPPT (variant dependent)

  • Max Charging Current: 10A / 20A / 30A (options available)

  • Battery Type Support: Lead Acid, AGM, Gel, Lithium

  • Display Type: LED / LCD

  • Operating Temperature: -20°C to +55°C

  • Material: High-quality ABS Plastic

Solar Panel 6V 200mA

Original price was: ₹440.00.Current price is: ₹390.00. inc. GST
  • Polycrystalline solar cell
  • Max output power: 1.1W
  • Max working voltage: 6.6V
  • Max charging current: 110mA
  • Min output power: 0.6W
  • Min working voltage: 6V
  • Min charging current:200mA
  • Small Epoxy Solar Panels are simple to install or add to your existing product
  • Construction requires no frame or special modifications
  • Small space required for installation.
  • Has 2 to 3 times the power of amorphous thin-film solar panels
  • Ready to use, they require no frame or special modifications.
  • For connection, just solder or crimp to the copper tape.
  • Laser cut to proper size and encapsulated in special sun and weather resistant materials;
  • Weight 33 Gms

Solar Panel 9V 100mA

Original price was: ₹300.00.Current price is: ₹250.00. inc. GST
  • Quality custom-design solar energy panel
  • The solar cells are encased and protected by a durable outer poly frame
  • Polycrystalline solar cells
  • Max output power: 1.08W
  • Max working voltage: 9.9V
  • Max charging current: 110mA
  • Min output power: 0.9W
  • Min working voltage: 9V
  • Min charging current: 100mA
  • Small Epoxy Solar Panels are simple to install or add to your existing product.
  • Construction requires no frame or special modifications
  • Small space required for installation.
  • Has 2 to 3 times the power of amorphous thin-film solar panels
  • Ready to use, they require no frame or special modifications.
  • For connection, just solder or crimp to the copper tape.
  • Size 6.7cm X 11.6cm  Thichkess 3mm
  • Weight 49gms

Solar Panel 9V 200mA

Original price was: ₹525.00.Current price is: ₹475.00. inc. GST
  • Quality custom-design solar energy panel
  • The solar cells are encased and protected by a durable outer poly frame
  • Polycrystalline solar cells
  • Max output power: 1.8W
  • Max power voltage: 9V
  • Max power current: 200mA
  • Open circuit voltage: 10.8v
  • Short circuit current: 220mA
  • Small Epoxy Solar Panels are simple to install or add to your existing product.
  • Construction requires no frame or special modifications
  • Small space required for installation.
  • Has 2 to 3 times the power of amorphous thin-film solar panels
  • Ready to use, they require no frame or special modifications.
  • For connection, just solder or crimp to the copper tape.
  • Dimension: 11.5cm x 13.6cm x 3mm
  • Weight 49gms

SOLAR POWERED MIN CAR

Solar powered mini car for STEM learning. Eco-friendly, battery-free, and perfect for DIY robotics and educational projects.

SOLAR POWERED VIBRATING BLACK COCKROACH BUG

Solar powered vibrating black cockroach toy. No batteries required—moves using sunlight, ideal for STEAM learning and fun pranks.