Worm Gear Box Reduction Motor 12V 350rpm 22 kg-cm Torque – WGM5551212000-34K
Worm Gear Box Reduction Motor 12V 110rpm 30 kg-cm Torque – WGM555127500-68K
- Operating Voltage: 12.V DC
- Rated Current: 1.1 A
- Rated Base Motor RPM: 7500.
- Rated Speed: 110RPM
- Rated Torque: 30kg-cm
- Operating Temperature: (°C) - -40 °C ～ +100°C.
- Relative Humidity(RH): 20% ～ 85% .
- Housing Material: Metal.
- Shaft Type: D-type.
- Motor Height: 27mm
- Motor Width: 40mm.
- Motor Length: 115mm
- Shaft Diameter: 8mm
- Shaft Length: 15mm
- Shaft Type: D-type. Motor
Worm Gear Box Reduction Motor 12V 175rpm 30 kg-cm Torque – WGM5551212000-68K
Worm Gear Box Reduction Motor 12V 88rpm 30 kg-cm Torque – WGM555126000-68K
Worm Gear Box Reduction Motor 12V 85rpm 6 kg-cm Torque – WGM370128500-100K
- Motor Type: DC Carbon Brush Motor.
- Gear Ratio:100: 1.
- Operating Voltage: 12.V DC
- Rated Current: 0.220A
- Rated Base Motor RPM: 8500.
- Rated Speed: 85RPM
- Rated Torque: 6kg-cm
- Operating Temperature: (°C) - -40 °C ～ +100°C.
- Relative Humidity(RH): 20% ～ 85% .
- Housing Material: Metal.
- Shaft Type: D-type.
- Motor Height: 25mm
- Motor Width: 32mm.
- Motor Length: 81mm
- Shaft Diameter: 6mm
- Shaft Length: 13mm
- Shaft Type: D-type. Motor
- Weight(gm): 170.
Pedal Throttle for Electric Scooter/Bike/Tricycle Accelerator Foot Pedal – Type 2
4-wheel Robot Smart Car Chassis Kits Car Model with Speed Encoder
- Operating Voltage: 3-6V VDC
- Gear Ratio: 1:48
- No-load speed(5V): about 200 RPM
- Rated Torque: 0.8 Kg.cm @ 5V
- Load current: 170mA (when it is 4.5V)
- Shaft Length: 10 mm
- Shaft Type: 6 mm, Double-D
- Loading Capacity: Max 2.5Kg
- Wheel Diameter: 65 mm
- Wheel Width: 27 mm
- Body Material: Plastic
- Grip Material: Rubber
- Very handy and simple in assembling/disassembling.
- Strong components so as to withstand extreme terrain conditions.
- Transparent Car Chassis.
- Attractive design.
- Double-layer structure, much of mounting holes, enough space
- Easy to install a variety of control panels, sensors
- Simple mechanical structure, easy for installation.
- Adopts 4 DC motors for better power, speed and load capacity
- Easy interface with Arduino development platform
- Enormous space between middle & bottom chasis
SIM900A 5V V4.0 Kit Wireless Extension Module GSM GPRS Board Antenna Tested
RS-50-555 Gear Motor High Torque 30 rpm 12v DC
- Operating Voltage Range: 6V to 15V DC
- Recommended Voltage: 12V DC
- Rated RPM: 10 (at 12V)
- Rated Torque: 26 Kg-cm
- No- Load Current: 0.2 A
- Full Load Current: 4.8 A
- Full (Stall) Load Torque: 80Kg-cm
- Motor Dimensions: 38.2 x 65.8 mm
- Gearbox Dimensions: 51.2 x 34mm
- Motor Shaft Length: 21.18 mm
- Shaft Diameter: 7.15mm
- Motor Shaft Type: D
- Weight: 300 gm
3D E3D V6 All Metal J-Head Hotend Extruder 1.75mm Filament 0.4mm Nozzle with Fan Duct
- Nozzle: 0.4mm
- Filament: 1.75MM
- Thermistor:100K NTC B 3950 ±1 %, 1m long wiring
- Heater: Ceramic heater 12V 40Watt. 1M long wiring
- High-Temperature Performance
- Easy No-solder, No-tape, No-adhesive Assembly And Maintenance
- Print The Widest Range Of Materials Possible
- High-Quality Printing
- Adaptable To Suit Your Needs
- Easy Mounting And Community Support
5V Wireless Power Supply Module Wireless Charging Module Wireless Transmission Module
- Magnetic-Coupled Resonance Technology
- Transmitting Voltage: 5V
- Output Power: 36W
- Output Voltage & Current: 5V, 3A
- Coil Size: outer diameter 82mm; inner diameter 30mm
- Transmitting Module Size: 17mm*30mm
- Receiving Module Size: 30mm*54mm
- Insulation Coil
- Compact Design
- Stable power supply
- Insulation Coil
- Space-saving design
USB Blaster ALTERA CPLD/FPGA Programmer
- Stably support SignalTap II embedded logic analyzer function, no mistake while crawling data.
- Fully support all Altera products such as CPLD: MAX3000, MAX7000, MAX9000, and MAXII.
- FPGA: Stratix, StratixII, StratxIII, Cyclone, CycloneII, CycloneIII, ACEX1K, APEX20K, and FLEX10K, etc.
- Active serial configuration device: EPCS1, EPCS4, EPCS16, EPCS64 etc.
- Enhanced configuration devices: EPC1, EPC4.
- Supports 3 download modes: AS, PS, and JTAG.
- Support and Nios II embedded soft core processor communication and debugging Rev.C latest version Hardware. Support jtag_uart.
- Speed is 6 times faster than parallel port download cable ByteBlasterII.
- Easy to use: MiniUSB interface, easy connection, two status indicator makes debugging more comfortable.
- Fully compatible with ALTERA USB Blaster, functionality and performance are the same as ALTERA original download cable.
- Operating Voltage: 1.5～5V JTAG IO Voltage.
- System configuration: Windows XP, Windows Vista, Windows7, USB interface.