DC 48V 350W BM1418ZXF Brushless Motor, Electric Bicycle Kit, DIY E-Tricycle
Flysky FS-i6 6 Channel
- Bandwidth (kHz): 500.
- RF Range (GHz): 2.40 ~ 2.48.
- No. of channels: 6.
- Remote controller weight (gm): 400.
- Power: 6V (1.5V AA*4).
- Antenna Length: 26mm * 2 (dual antenna).
- Transmitting Power: ≤ 20dBm.
- RF Receiver Sensitivity: -105dbm.
- Entry-level 6 channel 2.4GHz radio with telemetry capability.
- Easy to use Programming & Navigation Buttons.
- Supports Heli/Standard Wing/Elevon/V-Tail.
- 20 Model Memory.
- 8 Character Model Name.
- Trainer and charging ports.
- The backlight LCD screen displays real-time transmitter and receiver voltage.
- 4 Stick Mode Selectable.
Linear Actuator (Copy)
Product Description
The TFLA38-200 linear actuator the rotary motion of a motor into linear motion allowing for push and pull actions. Components : It mainly consists of a motor, gears, and a worm and tube motion mechanism. Function : It is used for moving objects in a straight line with precision and speed. Common uses : Electric beds and sofas, industrial lifting systems, and furniture.
Linear Actuator
Product Description
The TFLA38-100 linear actuator the rotary motion of a motor into linear motion allowing for push and pull actions. Components : It mainly consists of a motor, gears, and a worm and tube motion mechanism. Function : It is used for moving objects in a straight line with precision and speed. Common uses : Electric beds and sofas, industrial lifting systems, and furniture. A103531Linear Actuator
Product Description
The TFLA38-200 linear actuator the rotary motion of a motor into linear motion allowing for push and pull actions. Components : It mainly consists of a motor, gears, and a worm and tube motion mechanism. Function : It is used for moving objects in a straight line with precision and speed. Common uses : Electric beds and sofas, industrial lifting systems, and furniture.
Non Unite 350W MY1016Z3 24V GearedMotor
- Model: Non UNITEMOTOR MY1016Z3
- Name: 24V/36V DC Brushed Motor
- Rated Voltage: 24V DC / 36V DC
- Power 350W
- Rated Speed: 24VDC: 3000RPM. 36VDC: 3200RPM.
- No load speed : 3850RPM
- Gear Ratio: 1:9.78
- Rated Torque: 1.11N.m
- Sprocket: 9mm Pitch,
- Pitch: 12.7mm.
- Gear Ratio: 1:9.78
- Installation type: Motor With Foot Stand.
- Easy Install.
- Suit Controller: 24/36v 350w brush controller
- Usage: Electric Bike ,E-tricycle, Electric chairwheel,E-Scooter,E-Motocycle,DIY
TL866II Plus Universal USB MiniPro USB Programmer for 15000+IC SPI Flash NAND EEPROM MCU PIC AVR
- High-Speed Programming - 12 Mbps
- Unique ultra-low power consumption
- Portable performance
- Programmable programming power supply
- Best overvoltage, overcurrent protection
- 40-pin universal pin
- Upgrade function
- 54/74F/LS/HC CMOS4000 series IC functional tests
- AVR microcontroller one-to-one soft encryption
- Unified and convenient user interface
- NAND Flash: Yes
- ISP for 24/93/25 MCU: Yes
- 25 NOR Flash Max. Capacity: 512M
- Multiprogramming: 4 programmers
- VPP Max. Voltage: 18 V
- VCC Voltage: 1.8 V to 6.5 V
- W29C020 P+V (s): 10.S+2.4S
- W25X80 P+V (s): 9.3S+1.7S
- W25W64 P+V (s): 69S+14.5S
- Device List: 15,000+
- Support simultaneously burn with 4 Programmers each computer
- Minimum Volume and the lowest Power Consumption and Do not Feel any Heat in Process.
- All chips do not need an external power supply, the low power consumption of its own to ensure that the USB port can provide enough power.
- Best internal 40 pins over-voltage protection, the strongest VCC/VPP 4-level overcurrent protection. The short-circuit do not reset the PC.
- Unique serial ICSP interface
- Test CMOS4000 74/54 series integrated circuit. Can be located in the gate circuit error.
- Chip auto serial number is the most complete and practical.
Flysky FS-TH9X 9Channel With FS-R8B
- Transmitter: FS-TH9X Upgrade with FS-RM003 2.4GHz Module
- Receiver: FS-R8B
- Default Mode: Mode-2
- Input Power: 12V DC (1.5V x 8 AAA Battery)
- Bidirectional System
- Frequencies-Hopping
- Omni-directional High Gain Antenna
- Low Power Consumption
- Colour: Black
- Charger Port: Yes(DC Port)
- Data Output: PPM
- Channel Resolution: 4096
- Channel Delay: Better than 30us
- Display: STN VA-73 39mm LCD
- DSC port: 3.5mm:output:PPM
- Dimension:185*220*110mm
- weight: 690gm
Soldron 938 Soldering Station
Non Unite 500W MY1020 24V Motor
Fluke Multimeter 106
- Count: 6000
- AVG responding
- Voltage: DC: 600 volts; AC: 600 volts; DC Accuracy: ± 0.5% + 3 digit; AC Accuracy: ± 1% + 3 digit
- Current: DC: 10 amps; AC: 10 amps; DC Accuracy: ± 1.5% + 3 digit; AC Accuracy: ± 1.5% + 3 digit
- Resistance: 40 M ohm; Resistance Accuracy: ± 1.5% + 3 digit
- Capacitance: 1000 μF; Capacitance Accuracy: ± 5% + 5 digit
- CAT III 600 volts safety rated
Leadshine DMA860E Stepper Motor Driver
- Model: DMA860E.
- Control Mode: Step & Direction.
- Max Input Frequency: 200 kHz.
- Input Voltage Range: 18 - 80 VAC / 24 - 110 VDC.
- Suggested Power Supply Voltage Range: 36-90 VDC /24-60 VAC.
- Number of DIP Switch Resolution Configurations: 16.
- 16 selectable micro-step resolutions of 400-51,200 via DIP switches.
- 8 selectable output current settings of 2.4 – 7.2A via DIP switches.
- Logic Current Range: 7-16mA (10mA typical).
- Logic Voltage Range: 4-5 VDC for pulse active high (default), or 0-0.5V for pulse active low.
- Pulse enabled at: Rising edge.
- Idle Current Percentage: 50 %.
- Number of Digital Inputs: 3.
- Step Width: 2,500 ns.
- Minimal Direction Setup Time: 5,000 ns.
- Isolation Resistance: 500M Ohm..
- Ambient Temperature: 0-50°C.
- Humidity: 40–95% RH.
- Operating Temperature: 0-70°C.
- Vibration: 5.9 m/s2 Max.
- Motor auto-identification and parameter auto-configuration for optimal torque from wide-range motors.
- Step & direction (PUL/DIR) and CW/CCW (via internal jumper set) control. Step & direction by default Multi-Stepping for smooth motor movement.
- Opto Isolation for input control signals.
- Soft-start with no “jump” when powered on.
- Protections for over-voltage and over-current.
- Dimension: 5.94 X 3.82 X 2.24 Inches.
- Weight: 1.13 lbs.