Thread Extruder Nozzle For 3D Printer (0.3mm)
0.5mm 3D Printer Extruder Brass Nozzle
145mm Trapezoidal Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
- Rod Size: 8X145mm
- Lead (the straight distance which turn a circle): 8mm
- Nut Diameter: 8 mm.
- Color: silver and gold
- Material: Stainless steel and brass
- Mainly use for Stepping motor driving guide rail.
- T shape design, made of high-quality stainless steel material.
- Easy to install and convenient to use.
- Fine producing and practical.
PR34 2004 LCD Display Smart Controller W or Adapter for RAMPS1.4 Reprap 3D Printer
- RAMPS 1.4 2004 LCD Display intelligent controller.
- LED background light control circuit, a small function of the intelligent controller,
- With pin short time to decide on all LED turn or steering 30 seconds
- You can turn on the light time to do the long or short form of the adjustment TRIMM R4100K from 10 seconds to 2 minutes.
- Plug and play on the RAMPS, but need to modify the firmware to support.
- The product comes encoder parameter adjustment can be achieved, and the file selection print.
- With an SD card base on the back, put slicing file into the SD card and select the file on the LCD, then can be printing.
Creality CR-5 Pro 3D Printer with bl touch and silent motherboard 500w meanwell
• Print Size: 300*225*380mm
• Machine Size: 530*487*612mm
• Package Szie: 625*547*710mm
• Filament diameter: 1.75 mm PLA/ABS
• File Format: STL/OBJ/AMF
• Layer Heigh: 0.1-0.4mm
• Sicer software: Creality Slicer, Cura, Simplify3D, Repetier-Host
• Connectivity: Online/SD card
• Mainboard: ATmega2560 Silent board
• UI interface: 4.3inch touch screen
Creality ender 5 plus print large build volume ender 5 plus 3d printer with bl touch color
- Â Print Size: 300*225*380mm
- Machine Size: 530*487*612mm
-  Package Szie: 625*547*710mm
- Filament diameter: 1.75 mm PLA/ABS
- File Format: STL/OBJ/AMF
- Â Layer Heigh: 0.1-0.4mm
- Slicer software: Creality Slicer, Cura, Simplify3D, Repetier-Host
- Â Connectivity: Online/SD card
- Mainboard: ATmega2560 Silent board
- UI interface: 4.3inch touch screen
100K ohm NTC 3950 Thermistor/Temperature Sensor for Reprap 3D printer Extruder
- High-temperature Teflon wire temperature: 200 degrees
- Nominal resistance R25 (25 ℃): 100k
- Resistance accuracy: ± 1%
- B value R25 / 50: 3950k
- B value accuracy: ± 1%
- Operating temperature range: -40 ℃ ~ +300 ℃
- Dissipation power factor: ≥ 5 mW / ℃ (static air)
- Thermal time constant: ≤ 7S (static air)
- Maximum rated power: 45mW
- Wiring length: 1 meter
- Material: glass glaze film
12V 40W Ceramic Cartridge Heater 6mm*20mm For Extruder 3D Printers
- Material: stainless steel,
- Core: ceramic.
- Voltage: 12V.
- Power: 40W.
- Diameter: 6mm, Heating Length: 20 mm.
- Wire Length: 100 cm.
- Works on many 3D printers, including RepRap and Prusa models.
- It fits nicely in our extruder, so it’s an easy replacement.
- Small but powerful.
- Get your hotend hot quickly.
- This unit is a more powerful unit than the standard unit for many 3D printers.
Lead Copper Nut 8mm
24V 40W Ceramic Cartridge Heater Wire For 3D Printer
- Voltage: 24V, Power: 40W
- Material: 304 Stainless Steel
- Wire Length :1M
- Diameter: 6mm
- Length: 20 mm
- Works on many 3D printers, including RepRap and Prusa models.
- It fits nicely in our extruder, so it’s an easy replacement.
- Small but powerful.
- Get your hotend hot quickly.
- This unit is a more powerful unit than the standard unit for many 3D printers.