Showing 37–48 of 63 results

Purple ABS 1.75 mm 1 KG Filament-Wanhao

1,500.00 inc. GST
  • Material: ABS
  • Color: Purple
  • Material Diameter: 1.75mm
  • Printing Temperature: 220° to 230°C
  • Roundness Accuracy: +/- 0.5mm +/- 0.5mm
  • Density: 1.31g/cm3 1.01g/cm3
  • Mounted: Spool Mounted
  • Net weight: 1kg
  • Packaging Vacuum-sealed with desiccant to protect the filament from humidity
  • Highly Detailed & Quality Outputs.
  • Tried and Tested by Makenica.com
  • Compatible with any FDM 3D Printer.
  • ABS is stronger than PLA
  • Easy to post-process.
  • Environment friendly – ISO 9001 and ROHS certified

Ramps 1.6 For 3D Printer Parts

700.00 inc. GST
  • Input voltage: 12V.
  • Power: 200W.
  • Patch MOS tube: B55NF06.
  • Ramps 1.6 is a 4-layer board.
  • Can be extended to LCD and other parts.
  • There are heater and fan MOSFET outputs and 3 thermistor interfaces
  • Support motor drivers: support A4988 DRV8825 and other motor drivers(support five motor drivers Simultaneously).
  • 5A additional security and component protection fusion.
  • Heated bed controls additional 11A fuses.
  • Applied to 5 Pololu stepper drive board.
  • Design of Pololu plate pin socket can be easily replaced or removed for future design.
  • I2C and SPI pins are available for future expansion.
  • Servo connectors are used for connecting limit stops, motors and light-emitting diodes.
  • LED will light when the heater has output, choose 2 motors to connect to Z Prusa Mendel.
  • Dimension: 101.5 * 60.5mm

Red PLA 1.75 mm 1 KG Filament-Wanhao

1,500.00 inc. GST
  • High-quality starting material
  • Diameter tolerances of ± 0.1mm checked with laser monitor
  • Smooth surface with even rounding
  • Lower melting temperature
  • Good flow properties
  • Little odor development
  • Less risk of clogging the nozzle, compared to ABS
  • Compatible with almost all 1.75mm FDM printers
  • No heating bed necessary
  • High quality means less waste
  • Easy to use
  • No heating bed necessary Printing Settings:
  • Best Printing Temperature:200-220℃
  • Bed Temperature:0-70℃
  • Printing Speed:30~90mm/s
  • Movement Speed :90~150mm/s

SC10UU 10mm Linear Motion Bearing Slide Bushing Block

250.00 inc. GST
  • Linear Bearing
  • Material: Metal, Rubber
  • SC10UU: 10 mm
  • Bore Diameter: 16mm
  • Color: Silver
  • Smooth Moving
  • Low Friction
  • High rigidity and long life
  • Widely used in home appliances, industrial, low noise, and high-speed electric motors, construction machinery, automotive components, pumps, and machinery.

Silver ABS 1.75 mm 1 KG Filament-Wanhao

1,500.00 inc. GST
  • Material: ABS
  • Color: Silver
  • Material Diameter: 1.75mm
  • Printing Temperature: 220° to 230°C
  • Roundness Accuracy: +/- 0.5mm +/- 0.5mm
  • Density: 1.31g/cm3 1.01g/cm3
  • Mounted: Spool Mounted
  • Net weight: 1kg
  • Packaging Vacuum-sealed with desiccant to protect the filament from humidity
  • Highly Detailed & Quality Outputs.
  • Tried and Tested by Makenica.com
  • Compatible with any FDM 3D Printer.
  • ABS is stronger than PLA
  • Easy to post-process.
  • Environment friendly – ISO 9001 and ROHS certified

SK8 Linear Rail Shaft Guide Support Bracket For 3D Printer Bearing CNC Stepper Motor

180.00 inc. GST
  • Model: SK8.
  • Shaft ID: 8mm
  • Mounting Hole Diameter: Approx. 5.5 mm
  • Center Hole Distance: Approx. 32 mm
  • Material: Steel
  • Light and simple design
  • High torque capacity
  • High rigidity
  • High positioning accuracy, high rotating accuracy
  • High efficiency
  • Riding stability
  • Dimensions: 14 x 42 x 32 mm
  • Weight: 30gm

Sky Blue ABS 1.75 mm 1 KG Filament-Wanhao

1,500.00 inc. GST
  • Material: ABS
  • Color: Sky blue
  • Material Diameter: 1.75mm
  • Printing Temperature: 220° to 230°C
  • Roundness Accuracy: +/- 0.5mm +/- 0.5mm
  • Density: 1.31g/cm3 1.01g/cm3
  • Mounted: Spool Mounted
  • Net weight: 1kg
  • Packaging Vacuum-sealed with desiccant to protect the filament from humidity
  • Highly Detailed & Quality Outputs.
  • Tried and Tested by Makenica.com
  • Compatible with any FDM 3D Printer.
  • ABS is stronger than PLA
  • Easy to post-process.
  • Environment friendly – ISO 9001 and ROHS certified

Sky Blue PLA 1.75 mm 1 KG Filament-Wanhao

1,500.00 inc. GST
  • High-quality starting material
  • Diameter tolerances of ± 0.1mm checked with laser monitor
  • Smooth surface with even rounding
  • Lower melting temperature
  • Good flow properties
  • Little odor development
  • Less risk of clogging the nozzle, compared to ABS
  • Compatible with almost all 1.75mm FDM printers
  • No heating bed necessary
  • High quality means less waste
  • Easy to use
  • No heating bed necessary Printing Settings:
  • Best Printing Temperature:200-220℃
  • Bed Temperature:0-70℃
  • Printing Speed:30~90mm/s
  • Movement Speed :90~150mm/s

Slate Grey ABS 1.75 mm 1 KG Filament-Wanhao

1,500.00 inc. GST
  • Material: ABS
  • Color: Slate Grey
  • Material Diameter: 1.75mm
  • Printing Temperature: 220° to 230°C
  • Roundness Accuracy: +/- 0.5mm +/- 0.5mm
  • Density: 1.31g/cm3 1.01g/cm3
  • Mounted: Spool Mounted
  • Net weight: 1kg
  • Packaging Vacuum-sealed with desiccant to protect the filament from humidity
  • Highly Detailed & Quality Outputs.
  • Tried and Tested by Makenica.com
  • Compatible with any FDM 3D Printer.
  • ABS is stronger than PLA
  • Easy to post-process.
  • Environment friendly – ISO 9001 and ROHS certified

Slate Grey PLA 1.75 mm 1 KG Filament-Wanhao

1,500.00 inc. GST
  • High-quality starting material
  • Diameter tolerances of ± 0.1mm checked with laser monitor
  • Smooth surface with even rounding
  • Lower melting temperature
  • Good flow properties
  • Little odor development
  • Less risk of clogging the nozzle, compared to ABS
  • Compatible with almost all 1.75mm FDM printers
  • No heating bed necessary
  • High quality means less waste
  • Easy to use
  • No heating bed necessary Printing Settings:
  • Best Printing Temperature:200-220℃
  • Bed Temperature:0-70℃
  • Printing Speed:30~90mm/s
  • Movement Speed :90~150mm/s

T8 Trapezoidal Lead Screw 8MM Thread 2MM Pitch 300MM Length with Brass Nut

720.00 inc. GST
  • Lead Screw Material: 304 Stainless Steel.
  • Length: 300mm.
  • Diameter: 8mm.
  • 4 Start Lead Screw
  • Brass Nut Size: 10 x 13 x 22 mm.
  • Mainly use for Stepping motor driving guide rail.
  • T shape design, made of high-quality stainless steel material.
  • Easy to install and convenient to use.

TEVO Tarantula I3 Aluminium Extrusion 3D Printer kit

23,000.00 inc. GST
  • Layer resolution of 50 microns.
  • MAX Printing Speed: 150 mm/s.
  • Build size: 200X 200 X 200mm.
  • Full Metal Bowden Extruder.
  • Material type: PLA, ABS, PETG, Wood, PVA and Flexible Filaments (With Pro Metal Extruder).
  • Material specifications 1.75mm in diameter.
  • Positioning accuracy: Z 0.04mm, XY 0.012mm.
  • Printing Color: Single color.
  • Nozzle diameter: 0.4mm.
  • Recommended extruder temperature: 210°C (the maximum can be set to 260°C).
  • Heating plate temperature: 60-120°C (proper winter warming and summer appropriate cooling).
  • Best ambient temperature: +/-25°C.
  • Power requirements: 220V, 250W, 50Hz, 0.89A.
  • Connection: TF card or USB.
  • The file print format: STL, G-Code.
  • Compatibility: Windows, Linux, Mac.
  • CE, FCC specifications: CE, FC, ROHS.
  • No Printed Parts.
  • Easy Assembling.
  • High Performance.
  • 2020 and 2040 Aluminium Frames.
  • Equipment size: 430 X 440 X400mm.
  • Package size: 440X 340X 190m.
  • Device weight: 7.5kg.