1.75mm PLA 3D Printer Filament Black Wanhao
- Material: PLA
- Diameter: 1.75 mm
- Printing temperature: 190-225 ° C
- Heating bed temperature: 45 ° C - 60 ° C
- Density: 1.25 g / cm³-21.5 ° C
- Melt Flow Index: 5 (10min, 2.16kg)
- Shock resistance: 5 KJ / m²
- Dimensional accuracy: 1.70 ± 0.1 mm
- Filament weight: 1 kg
- Spool size: approx. 200 mm diameter, 50 mm spool mount, 65 mm height
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even roundness
- Lower melting temperature
- Good flow properties
- Little odor development
- Less danger of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary
1.75mm HIPS 3D Printer Filament Black Wanhao
- Colour: Black
- Diameter: 1.75mm
- Material: HIPS
- Print Temperature(Degree Celsius): 230 - 270 Deg C
- Melting Temp: 230 - 270 Deg C
- Highly Detailed & Quality Outputs
- Tried and Tested by Makenica.com
- Compatible with any FDM 3D Printer.
- HIPS is stronger than PLA High Impact Polystyrene
- 1kg spools on black reel
- Highly Detailed & Quality Outputs. Every time.
- Tried and Tested by Makenica.com
- Compatible with any FDM 3D Printer.
- HIPS is stronger than PLA
- Easy to post-process.
Black PLA 1.75 mm 1 Kg Filament For 3D Printer Wanhao
- Material: PLA
- Diameter: 1.75 mm
- Printing temperature: 190-225 ° C
- Heating bed temperature: 45 ° C - 60 ° C
- Density: 1.25 g / cm³-21.5 ° C
- Melt Flow Index: 5 (10min, 2.16kg)
- Shock resistance: 5 KJ / m²
- Dimensional accuracy: 1.70 ± 0.1 mm
- Filament weight: 1 kg
- Spool size: approx. 200 mm diameter, 50 mm spool mount, 65 mm height
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even roundness
- Lower melting temperature
- Good flow properties
- Little odor development
- Less danger of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary
100K ohm NTC 3950 Thermistor/Temperature Sensor for Reprap 3D printer Extruder
- High-temperature Teflon wire temperature: 200 degrees
- Nominal resistance R25 (25 ℃): 100k
- Resistance accuracy: ± 1%
- B value R25 / 50: 3950k
- B value accuracy: ± 1%
- Operating temperature range: -40 ℃ ~ +300 ℃
- Dissipation power factor: ≥ 5 mW / ℃ (static air)
- Thermal time constant: ≤ 7S (static air)
- Maximum rated power: 45mW
- Wiring length: 1 meter
- Material: glass glaze film
SC10UU 10mm Linear Motion Bearing Slide Bushing Block
3D E3D V6 All Metal J-Head Hotend Extruder 1.75mm Filament 0.4mm Nozzle with Fan Duct
- Nozzle: 0.4mm
- Filament: 1.75MM
- Thermistor:100K NTC B 3950 ±1 %, 1m long wiring
- Heater: Ceramic heater 12V 40Watt. 1M long wiring
- High-Temperature Performance
- Easy No-solder, No-tape, No-adhesive Assembly And Maintenance
- Print The Widest Range Of Materials Possible
- High-Quality Printing
- Adaptable To Suit Your Needs
- Easy Mounting And Community Support
3D printer 128×64 Smart LCD controller for ramps 1.4
- RAMPS 1.4 LCD 12864 intelligent controller.
- With an SD card base on back.
- Large screen display 128×64 LCD (3.2″)
- SD card slot at the back, able to directly select a file and print
- The product comes encoder parameter adjustment can be achieved, and the file selection print
- Plug & play on the RAMPS, but need to modify the firmware to support.
- LCD 12864 Smart Controller fully supported by Marlin Firmware.
- Large screen display 128×64 LCD (3.2″)
- SD card slot at the back, able to directly select a file and print
- The product comes encoder parameter adjustment can be achieved, and the file selection print
- Plug & play on the RAMPS, but need to modify the firmware to support.
- LCD 12864 Smart Controller fully supported by Marlin Firmware.
T8 Trapezoidal Lead Screw 8MM Thread 2MM Pitch 300MM Length with Brass Nut
PR53 215mm Trapezoidal Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
PR34 2004 LCD Display Smart Controller W or Adapter for RAMPS1.4 Reprap 3D Printer
- RAMPS 1.4 2004 LCD Display intelligent controller.
- LED background light control circuit, a small function of the intelligent controller,
- With pin short time to decide on all LED turn or steering 30 seconds
- You can turn on the light time to do the long or short form of the adjustment TRIMM R4100K from 10 seconds to 2 minutes.
- Plug and play on the RAMPS, but need to modify the firmware to support.
- The product comes encoder parameter adjustment can be achieved, and the file selection print.
- With an SD card base on the back, put slicing file into the SD card and select the file on the LCD, then can be printing.
145mm Trapezoidal Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
- Rod Size: 8X145mm
- Lead (the straight distance which turn a circle): 8mm
- Nut Diameter: 8 mm.
- Color: silver and gold
- Material: Stainless steel and brass
- Mainly use for Stepping motor driving guide rail.
- T shape design, made of high-quality stainless steel material.
- Easy to install and convenient to use.
- Fine producing and practical.
GT2 Open Timing Belt for 3D Printer and CNC
MOQ: 1 m
- Pitch: 2mm
- Material: Neoprene Rubber With Fiberglass Core
- Width: 6mm
- Total Length: 10M
- Shape: Open Loop
- Core Wire Material: Glass Fiber
- Precision registration and timing with no loss of high torque carrying capability
- Minimal vibration and chordal effect
- Positive slip proof engagement
- Wide speed range, especially important when the entire speed range is developed from a single source
- Virtually no elongation (stretching) due to wear
- Power transmission efficiency is not lost with the use
- A clean operation, no need for lubrication
- Reduced noise.
- Long, dependable trouble-free service.