CD4017 Decade Counter With 10 Decoded Outputs IC
- Decade Counter With 10 Decoded Outputs
- Supply Voltage:Â 3 to 20V
- Input Current: ±10mA
- High level Output Voltage Min.:Â 4.95V
- Low level Output Voltage:Â 0.05V
- High level Input Voltage Min.:Â 3.5V
- Low level Input Voltage Max.:Â 1.5V
- Power Dissipation:Â 200mW
- Propagation Delay Time Max.:Â 650ns
- Package:Â DIP-16
- High noise immunity 0.45 VDD (typ.)
- Low power Fan out of 2 driving 74L
- TTL compatibility or 1 driving 74LS
- Medium speed operation 5.0 MHz (typ.)with 10V VDD
- Low power 10 mW (typ.)
- Fully static operation
PIC16F876A Microcontroller IC
- Maximum CPU Frequency: 20 MHz
- Architecture: 8 bit
- Program Memory (Flash): 14 kB
- RAM: 368 byte
- Internal Oscillator: No
- ADC: 1 (5 channels)
- of Pins: 28
- Voltage: 2V - 5.5V
- 100,000 erase/write cycle Enhanced Flash program memory typical
- 1,000,000 erase/write cycle Data EEPROM memory typical
- Data EEPROM Retention > 40 years
- Self-reprogrammable under software control
- In-Circuit Serial Programmingâ„¢ (ICSPâ„¢) via two pins
- Single-supply 5V In-Circuit Serial Programming
- Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation
- Programmable code protection
- Power saving Sleep mode
- Selectable oscillator options
- In-Circuit Debug (ICD) via two pins
- ​CMOS TECHNOLOGY:
- Low-power, high-speed Flash/EEPROM technology
- Fully static design
- Wide operating voltage range (2.0V to 5.5V)
- Commercial and Industrial temperature ranges
- Low-power consumption
LM337 3-Terminal 1.5A Negative Adjustable Regulator IC
TOP221PN Off-line PWM Switch IC
- Supply current: 1.2mA
- Supply Voltage: 85-265VAC
- Output Voltage: 5.7 V
- Power (Watts): 9W
- Switching Frequency-Max: 100 kHz
- Package: DIP-8
- Lowest cost, lowest component count switcher solution
- Â Cost competitive with linears above 5 W
-  Very low AC/DC losses – up to 90% efficiency
- Â Built-in Auto-restart and Current limiting
- Latching Thermal shutdown for system level protection
- Implements Flyback, Forward, Boost or Buck topology
- Works with primary or opto feedback
- Stable in discontinuous or continuous conduction mode
- Source connected tab for low EMI
- Circuit simplicity and Design Tools reduce time to market
CD40106 Hex Inverting Schmitt Trigger IC
- Hex Inverting Schmitt Trigger
- Supply Voltage Range:Â 3 to 15V
- Number Of Circuits:Â 6
- Quiescent Current Max.: 4µA
- Low level Output Current:Â 3.4mA
- High level Output Current: 3.4Ma
- Positive Going Input Voltage Max.: 3.5V
- Negative Going Input Voltage Max.: 3V
- Propagation Delay Time Max.: 180ns
- Package: DIP-14
CD4002 Dual 4-Input NOR Gate IC
- Dual 4-Input NOR Gate
- Supply Voltage Range:Â 3 to 15V
- Power Dissipation:Â 200mW
- Low level Output Voltage Max.:Â 0.05V
- High level Output Voltage Min.:Â 4.95V
- Low level Input Voltage Max.:Â 1.5V
- High level Input Voltage Min.:Â 3.5V
- Propagation Delay Time Max.:Â 250ns
- Output Drive Current:Â -3.2mA
- Package:Â DIP-14
74LS163 Synchronous 4-Bit Binary Counter IC
- Synchronous 4-Bit Binary Counter
- High-level input voltage:Â 2V
- Low-level input voltage:Â 0.8V
- High-level output current:Â -0.4mA
- Low-level output current:Â 8mA
- Input clamp voltage:Â -1.5V
- Maximum clock frequency:Â 25MHz
- Propagation delay time:Â 38ns
- Supply voltage range:Â 4.75 to 5.25V
- Package:Â DIP-16
LM3900 Quadruple Norton Operational Amplifier IC
- Wide single supply voltage: 4 VDC to 32 VDC Range or dual supplies: ±2 VDC to ±16 VDC
- Supply current drain independent of supply voltage
- Low input biasing current: 30 nA
- High open-loop gain: 70 dB
- Wide bandwidth: 2.5 MHz (unity gain)
- Large output voltage swing: (V+ − 1) Vp-p n Internally frequency compensated for unity gain
- Output short-circuit protection
- Quadruple Norton Operational Amplifier
- Input Bias Current (max): 200nA
- Operating temperature (max): 700C
- Output Current (max): 10mA
- Package: PDIP
LM386N Audio Power Amplifier IC
- Wide supply voltage range: 4V–12V or 5V–18V
- Low quiescent current drain: 4mA
- Voltage gains from 20 to 200
- Ground referenced input
- Self-centering output quiescent voltage
- Low distortion: 0.2% (AV = 20, VS = 6V, RL = 8Ω, PO =125mW, f = 1kHz)
- Storage Temperature: −65˚C to +150˚C
- Operating Temperature: 0ËšC to +70ËšC
- Junction Temperature: +150ËšC
- Supply Voltage: (LM386N-4) 22V
- Vapor Phase :(60 sec) +215ËšC
- Infrared: (15 sec) +220ËšC
- Low Voltage Audio Power Amplifier
- Minimum external parts
7809C 9V Positive Voltage Regulator IC
- Output Voltage:Â 9V
- Line Regulation (max):Â 180mV
- Load Regulation (max):Â 180mV
- Dropout Voltage:Â 2V
- Output Resistance: 17mΩ
- Output current in excess of 1A
- Internal thermal overload protection
- No external components required n
- Output transistor safe area protection
- Internal short circuit current limit
- Available in the aluminum TO-3 package
UM93214A 1-memory Tone Pulse Dialer IC
- 1-memory Tone/Pulse Dialer
- Low standby current
- 3.58MHz crystal or ceramic resonator
- Calibrated DTMF timing for redialing
- Memory retention voltage Max:Â 5V
- Operation Current(Pulse):Â 0.2mA
- Operation Current(Tone):Â 0.6mA
- Memory retention current: 0.1µA
- System Frequency:Â 3.58MHz
- Pause Time:Â 2.2s
- Operating Voltage: 2.0V – 5.5V
- Operating Temperature Range:Â -200C to +750C
- Package:Â DIP-16
PIC16F84A Microcontroller IC
- Maximum CPU Frequency: 20 MHz
- Architecture: 8 bit
- Program Memory (Flash): 1.75 kB
- RAM: 68 byte
- Internal Oscillator: No
- ADC: No
- of Pins: 18
- Voltage: 2V - 6V
- 10,000 erase/write cycles Enhanced FLASH Program memory typical
- 10,000,000 typical erase/write cycles EEPROM Data memory typical
- EEPROM Data Retention > 40 years
- In-Circuit Serial Programmingâ„¢ (ICSPâ„¢) - via two pins
- Power-on Reset (POR), Power-up Timer (PWRT), Oscillator Start-up Timer (OST)
- Watchdog Timer (WDT) with its own On-Chip RC Oscillator for reliable operation
- Code protection
- Power saving SLEEP mode
- Selectable oscillator options
- Low power, high speed technology
- Fully static design
- Wide operating voltage range:
- Low power consumption: