CD4010 Hex Buffer Converter IC
- Hex Buffer/Converter
- Input Current: ±10mA
- Power Dissipation:Â 300mW
- High level Output Voltage:Â 5.0V
- Low level Output Voltage Max.:Â 0.05V
- High level Input Voltage:Â 2.75V
- Low level Input Voltage:Â 2.25V
- Low level Output Current:Â 7mA
- High level Output Current:Â -1.2mA
- Propagation Delay Time Max.:Â 200ns
- Package:Â DIP-16
74S240 Octal Buffer and Line Driver IC With 3-State Output
- Octal Buffer and Line Driver With 3-State Output
- Logic Family: S
- Logic Type: Bipolar
- Polarity: Inverting
- High Level Output Current: -15 mA
- Low Level Output Current: 64 mA
- Number of Channels per Chip: 8
- Propagation Delay Time: 7 ns at 5 V
- of Pins: 20
- Operating Temperature Range: 0°C to +70°C
- Supply Voltage Range: 4.75V to 5.25V
- Package: DIP-20
LM2409 Monolithic Triple 9.5ns CRT Driver IC
- Monolithic Triple 9.5 ns CRT Driver
- Dissipates approximately 50% less power than LM2406
- Well matched with LM1279 video preamp
- 0V to 5V input range
- Stable with 0 pF–20 pF capacitive loads and inductive peaking networks
- Convenient TO-220 staggered lead package style
- Standard LM240X Family Pinout which is designed for easy PCB layout
LM1876 Dual 20W Audio Power Amplifier IC
- Dual 20W Audio Power Amplifier with Mute and Standby Modes
- Spike Protection
- Minimal amount of external components necessary
- Quiet fade-in/out mute mode
- Standby-mode
- Isolated 15-lead TO-220 package
- THD+N at 1 kHz at 2 x 15W continuous average output power into 4Ω or 8Ω: 0.1% (max)
- THD+N at 1 kHz at continuous average output power of 2 x 20W into 8Ω: 0.009% (typ.)
- Standby current:Â 4.2 mA (typ.)
PIC16F887 Microcontroller IC
- Architecture: 8 bit
- Program Memory (Flash): 14 kB
- RAM: 368 byte
- Internal Oscillator: 8 MHz, 32 KHz
- ADC: 1 (14 channels)
- of Pins: 40
- Voltage: 2V - 5.5V
- Precision Internal Oscillator:
- Power-Saving Sleep mode
- Wide operating voltage range (2.0V-5.5V)
- Industrial and Extended Temperature range
- Power-on Reset (POR)
- Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
- Brown-out Reset (BOR) with software control option
- Enhanced low-current Watchdog Timer (WDT) with on-chip oscillator (software selectable nominal 268 seconds with full prescaler) with software enable
- Multiplexed Master Clear with pull-up/input pin
- Programmable code protection
- High Endurance Flash/EEPROM cell:
- Program memory Read/Write during run time
- In-Circuit Debugger (on board)
LM2406 Monolithic Triple 9ns CRT Driver IC
LM1269 RGB Video Amplifier IC
- 110 MHz I2C Compatible RGB Video Amplifier System with OSD & DACs
- 110 MHz bandwidth preamplifier with full video signal parametric control
- 4 external 8-bit DACs for bus controlled Bias and Brightness
- Suitable for use with discrete or integrated clamp, with software configurable Brightness mixer
- Power Save (Green) Mode, 80% power reduction
- Matched to LM246X driver
- Temperature Range 0ËšC to 70ËšC
- Supply Voltage (VCC) 4.75V < VCC < 5.25V
- Video Inputs 0.0V < VIN < 1.0VP-P
- Thermal Resistance to Case (θJC) 32˚C/W
- Junction Temperature (TJ) 150ËšC
- ESD Susceptibility (Note 4) 3.5 kV
- ESD Machine Model (Note 5) 350V
- Storage Temperature −65˚C to +150˚C
- Lead Temperature (Soldering, 10 sec.) 265ËšC
MEGA8515 Atmel Microcontroller IC
- Flash (Kbytes):8 Kbytes
- Pin Count: 44
- Operating Freq. (MHz): 16 MHz
- CPU: 8-bit AVR
- Max I/O Pins: 35
- Ext Interrupts: 3
- SPI: 1
- UART: 1
- SRAM (Kbytes): 0.5
- EEPROM (Bytes): 512
- Operating Voltage (Vcc): 2.7 to 5.5
- Package: PDIP 40P6 40
- High-performance, Low-power AVR® 8-bit Microcontroller
- RISC Architecture
- Non-volatile Program and Data Memories
- Peripheral Features includes One 8-bit Timer/Counter with Separate Prescaler and Compare Mode ,One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode, Three PWM Channels , Programmable Serial USART , Master/Slave SPI Serial Interface
- Operating Voltages – 2.7 - 5.5V for ATmega8515L , 4.5 - 5.5V for ATmega8515
CD4023 Buffered Triple 3-Input NAND Gate IC
MEGA16A Atmel Microcontroller IC
- Flash (Kbytes): 16 Kbytes
- Pin Count: 44
- Operating Freq. (MHz): 16 MHz
- CPU: 8-bit AVR
- Max I/O Pins: 32
- Ext Interrupts: 3
- SPI: 1
- UART: 1
- ADC channels: 8
- SRAM (Kbytes): 1
- EEPROM (Bytes): 512
- Operating Voltage (Vcc): 2.7 to 5.5
- High Performance, Low Power Atmel®AVR® 8-Bit Microcontroller Family
- Advanced RISC Architecture.
- High Endurance Non-volatile Memory Segments
- Peripheral Features includes Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode,One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode , Real Time Counter with Separate Oscillator , Six PWM Channels , 8-channel 10-bit ADC in TQFP.
- Programmable Serial USART ,Master/Slave SPI Serial Interface.
PIC16F72 Microcontroller IC
- Maximum CPU Frequency: 20 MHz
- Architecture: 8 bit
- Program Memory (Flash): 3.5 kB
- RAM: 128 byte
- Internal Oscillator: No
- ADC: 1 (5 channels)
- of Pins: 28
- Voltage: 2V - 5.5V
- 1,000 erase/write cycle FLASH program memory typical
- Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
- Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation
- Programmable code protection
- Power saving SLEEP mode
- Selectable oscillator options
- In-Circuit Serial Programmingâ„¢ (ICSPâ„¢) via 2 pins
- Processor read access to program memory
- Low power, high speed CMOS FLASH technology
- Fully static design
- Wide operating voltage range: 2.0V to 5.5V
- Industrial temperature range
- Low power consumption:
- < 0.6 mA typical @ 3V, 4 MHz
- 20 μA typical @ 3V, 32 kHz
- < 1 μA typical standby current
