CD4502BE CMOS Strobed Hex Inverter Buffer IC
- CMOS Strobed Hex Inverter/Buffer
- Number of Input Lines:Â 6
- Number of Output Lines:Â 6
- Polarity:Â Inverting
- High Level Output Current:Â -4.2 mA
- Logic Family:Â CD4000
- Low Level Output Current:Â 25.2 mA
- Maximum Power Dissipation:Â 100 mW
- Number of Channels per Chip:Â 5
- Output Type:Â 3-State
- Propagation Delay Time:Â 380 ns at 5 V, 180 ns at 10 V, 130 ns at 15 V
- Operating Temperature Range: -55°C to +125°C
- Supply Voltage Range:Â 3V to 18V
- Package:Â PDIP-16
74S37N Quad 2-Input Positive NAND Buffer IC
- Quad 2-Input Positive NAND Buffer
- High-level output voltage:Â 3.4V
- Low-level output voltage:Â 0.5V
- High-level output current:Â -3mA
- Low-level output current:Â 60mA
- Input clamp voltage:Â -1.2V
- No. of gates:Â 4
- No. of inputs:Â 8
- No. of outputs:Â 4
- Propagation delay time:Â 6.5ns
- Supply voltage range:Â 4.75 to 5.25V
- Package:Â DIP-14
CD4010 Hex Buffer Converter IC
- Hex Buffer/Converter
- Input Current: ±10mA
- Power Dissipation:Â 300mW
- High level Output Voltage:Â 5.0V
- Low level Output Voltage Max.:Â 0.05V
- High level Input Voltage:Â 2.75V
- Low level Input Voltage:Â 2.25V
- Low level Output Current:Â 7mA
- High level Output Current:Â -1.2mA
- Propagation Delay Time Max.:Â 200ns
- Package:Â DIP-16
74S240 Octal Buffer and Line Driver IC With 3-State Output
- Octal Buffer and Line Driver With 3-State Output
- Logic Family: S
- Logic Type: Bipolar
- Polarity: Inverting
- High Level Output Current: -15 mA
- Low Level Output Current: 64 mA
- Number of Channels per Chip: 8
- Propagation Delay Time: 7 ns at 5 V
- of Pins: 20
- Operating Temperature Range: 0°C to +70°C
- Supply Voltage Range: 4.75V to 5.25V
- Package: DIP-20
BC108 NPN Transistor 30V 0.1A
BD240C PNP Transistor -100V -2A
BD237 NPN Transistor 100V 2A
LM2409 Monolithic Triple 9.5ns CRT Driver IC
- Monolithic Triple 9.5 ns CRT Driver
- Dissipates approximately 50% less power than LM2406
- Well matched with LM1279 video preamp
- 0V to 5V input range
- Stable with 0 pF–20 pF capacitive loads and inductive peaking networks
- Convenient TO-220 staggered lead package style
- Standard LM240X Family Pinout which is designed for easy PCB layout
LM1876 Dual 20W Audio Power Amplifier IC
- Dual 20W Audio Power Amplifier with Mute and Standby Modes
- Spike Protection
- Minimal amount of external components necessary
- Quiet fade-in/out mute mode
- Standby-mode
- Isolated 15-lead TO-220 package
- THD+N at 1 kHz at 2 x 15W continuous average output power into 4Ω or 8Ω: 0.1% (max)
- THD+N at 1 kHz at continuous average output power of 2 x 20W into 8Ω: 0.009% (typ.)
- Standby current:Â 4.2 mA (typ.)
PIC16F887 Microcontroller IC
- Architecture: 8 bit
- Program Memory (Flash): 14 kB
- RAM: 368 byte
- Internal Oscillator: 8 MHz, 32 KHz
- ADC: 1 (14 channels)
- of Pins: 40
- Voltage: 2V - 5.5V
- Precision Internal Oscillator:
- Power-Saving Sleep mode
- Wide operating voltage range (2.0V-5.5V)
- Industrial and Extended Temperature range
- Power-on Reset (POR)
- Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
- Brown-out Reset (BOR) with software control option
- Enhanced low-current Watchdog Timer (WDT) with on-chip oscillator (software selectable nominal 268 seconds with full prescaler) with software enable
- Multiplexed Master Clear with pull-up/input pin
- Programmable code protection
- High Endurance Flash/EEPROM cell:
- Program memory Read/Write during run time
- In-Circuit Debugger (on board)
