Planetary Gear DC Motor with Encoder 12V 9 RPM 7.5 N-m Torque – TPG28395123000-334KE
- Model: TPG28M395-334K.
- Motor Type: DC Carbon Brush Motor.
- Gear Ratio: 334: 1.
- Operating Voltage: 12.V DC
- Rated Current: 0.250.A
- Rated Base Motor: RPM
- Rated Speed: 9. RPM
- Rated Torque: 5 N-m
- Operating Temperature: -40 °C ～ +100°C.
- Relative Humidity: 20% ～ 85% RH
- Gear Material: Powder Metallurgy, Steel, POM.
- Housing Material: Metal.
- Motor Body Size (Diameter): 28.mm
- Motor Length: 8.8mm
- Shaft Diameter: 6mm
- Shaft Length: 13mm
- Shaft Type: D-type.
- Motor Weight: 230. gm
- Brushed permanent magnet DC motor.
- Variable speed and reversible.
- Planetary Gear Box.
- Standard brush life of 2000+
36MM Planetary Gear Motor 300 RPM 12v DC – High Torque
- Motor Type: DC Planetary Gear Motor
- Gear Material: Metal
- Motor Length: 57mm
- Shaft Length: 20mm
- Total Length: 100mm
- Gearbox Diameter: 36mm
- Motor Diameter: 36mm
- Shaft Diameter: 8mm
- Weight: 350g
- Rated Voltage: 12
- Reduction Ratio: 1:19
- No-load Speed: 315 RPM
- No-load Current: 230mA
- Rated Load Speed: 280 RPM
- Rated Load Current: 1.5A
- Stall Torque : 16kgcm
- Stall Current: 6.5 A
- Gearbox Length -L: 45mm
36MM Planetary Gear Motor 100 RPM 12VDC – High Torque
- Motor Type: DC Planetary Gear Motor
- Gear Material: Metal
- Motor Length: 57mm
- Shaft Length: 20mm
- Total Length: 100mm
- Gearbox Diameter: 36mm
- Motor Diameter: 36mm
- Shaft Diameter: 8mm
- Rated Voltage: 12V
- Reduction Ratio: 1:51
- No-load Speed: 117 RPM
- No-load Current: 230mA
- Rated Load Speed : 100 RPM
- Rated Load Current : 1.5A
- Stall Torque : 32kgcm
- Stall Current: 6.5 A
- Gearbox Length -L: 55mm
- Brushed permanent magnet DC motor
- Variable speed and reversible
- Weight: 350g
Stepper Motor NEMA 23 28 kg-cm Hybrid Bipolar
• Phase - 2 phase Bipolar
• Rated Voltage:4.8V
• Current/ phase: 3A
• Inductance/ phase: 7.5 mH (20% variance)
• Resistance/ phase: 1.6 Ohms (10% variance)
• Holding Torque: 28 kg-cm
• Number of Leads: 4
• Step Angle: 1.8°
• Step Angle Accuracy: ±5% (full step, no load)
• Resistance Accuracy: ±10%
• Inductance Accuracy: ±20%
• Frame Size: 85x85mm
• Shaft Length: 32mm
• Shaft Diameter: 12mm
• They are high torque stepper motors.
• Input pulse decides the rotation angle of the motor.
• High accuracy of around 3 to 5% a step.
• Provides good starting, stopping and reversing
• Supreme finish, Smooth surface, Long lasting life
• Can operate in an open loop control system
• High reliability
FEETECH FT5335M 35kgcm Ultra-High-Torque, High-Voltage Digital Giant Servo
Planetary Gear DC motor – 10 RPM / 12V
Controller for BM1418ZXF 48V 350W for Brushless DC Motor
“FEETECH FS6535M 33KG High Torque Analog Servo FOR Large Scale Big RC Robot – FS6535M “
- Operating Voltage:4.8-6Volts
- Stalling torque: 27.5(kg-cm) @ 4.8V; 33(kg-cm) @ 6V.
- Stalling current: 3.8 A.
- No-load speed: 0.27±0.03(sec/60°).
- Direction: CCW.
- Operating Angle: 180degree.
- Required Pulse: 500us-2500us.
- Bearing Type: 2BB.
- Gear Type: Metal.
- Motor Type: Carbon.
- Wire length: 25cm.
- Rotation angle (standard) : CW 90±5°.
- Dimension: 65.8x30.4x57.6mm.
- Weight: 199g
48v 500W BM1418ZXF Motor Controller
- Rated Voltage: 48 Volt DC.
- Rated Power: 500W.
- Maximum Current: 30 Amps.
- Level Brake: low.
- Current limited: 30A±0.5A.
- Efficiency: ≥83%.
- Consumption: <1.5W.
- Turn The Voltage: 1-4.2V.
- Phase Angle: 120 degrees.
- Includes attachments for motor, accelerator, brake, battery, battery charging, brake light, power lock
Stepper Motor NEMA 23 23 kg-cm Hybrid Bipolar
- Phase - 2 phase Bipolar
- Rated Voltage:2.55V
- Current/ phase: 3.5A
- Inductance/ phase: 2.8 mH (20% variance)
- Resistance/ phase: 0.73 Ohms (10% variance)
- Holding Torque: 23 kg-cm
- Number of Leads: 4
- Step Angle: 1.8°
- Step Angle Accuracy: ±5% (full step, no load)
- Resistance Accuracy: ±10%
- Inductance Accuracy: ±20%
- Frame Size: 85x85mm
- Shaft Length: 32mm
- Shaft Diameter: 12mm
- They are high torque stepper motors.
- Input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- Provides good starting, stopping and reversing
- Supreme finish, Smooth surface, Long lasting life
- Can operate in an open loop control system
- High reliability
VNH2SP30 – Monster Moto Shield 30A Mini Stepper Motor Driver
- Driver Model: Monster Moto Shield VNH2SP30
- Operating Voltage: 12V to 16V DC
- Maximum current rating: 30 A
- Continuous Current: 14 A
- Number of Channels: 1
- MOSFET on-resistance: 19 m (per leg)
- Maximum PWM frequency: 20 kHz
- Current sensing available to Arduino analog pin
- Thermal Shutdown
- Under voltage and Overvoltage shutdown.
- Dimensions: 55 x 28 x 12mm
- Weight: 15gm
NEMA 23 18.9 kg-cm
- Step Angle : 1.8 °
- Holding Torque : 18.9 kg-cm
- Operating Voltage : 3.2 Volts
- Supply Current (A)Â : 2.8 A/Phase
- No. of Leads : 4
- Inductance: 3.6 mH/Phase
- Resistance : 1.13 O/Phase
- Rotor Inertia : 480 gm-cm2
- Inductance Accuracy : ±20%
- Resistance Accuracy : ±10%
- Shaft Diameter (mm)Â : 6.35
- Shaft Length (mm)Â : 20.6
- Cable Length: 30 CM
- Comparably more powerful than NEMA17 motors.
- Input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- Provides good starting, stopping and reversing.
- Control of this motor is less costly because of exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.