DC Toy Motor
Bullet Connector 3.17mm
STEPPER MOTOR NEMA 23 7.2KG
20A PWM Motor Speed Controller DC 6 30V 6V 12V 24V 48V
A4988 STEPPER MOTOR DRIVE CONTROLLER BOARD
- Operating voltage supply: 8 V to 35 V
- Continuous current per phase: 1 Amp
- Maximum current per phase: 2 Amp
- Minimum logic voltage: 3V
- Maximum logic voltage: 5.5V
- Microstep resolutions: Full, 1/2, 1/4, 1/8, and 1/16
- Compact size, easy to install and use.
- All jumpers hit the ON position to indicate 16 subdivisions (4988) or 32 subdivisions (8825).
- Jm connection motor; Jv Connects 5V and 12V-24V Power Supply.
- E /S /D /G of Jc corresponds to Enable /Step /Dir /Gnd driving signal output on the connection respectively.
Worm Gear Box Reduction Motor 12V 190rpm 90 kg-cm Torque – WGM775127500-40K
- Product Name: Worm Gear Motor
- Rated Voltage: DC 12V
- No-load Speed: 15RPM
- Rated Speed: 190RPM
- Rated Current: 15A
- Rated Torque: 90KG.cm
- Output Power: 90W
- Reduce Ratio: 1:80
- Shaft Bore Diameter: 14mm
- Dimension:255*96*115 mm
- Commutation: Brush
- Reversible: Yes
- Lifespan: more than 2000 hours
- Net Weight: 3.98KG
Worm Gear Box Reduction Motor 12V 94rpm 90 kg-cm Torque – WGM775127500-80K
Worm Gear Box Reduction Motor 12V 11rpm 150 kg-cm Torque – WGM775126000-548K
- Product Name: Worm Gear Motor
- Rated Voltage: DC 12V
- No-load Speed: 15RPM
- Rated Speed: 11RPM
- Rated Current: 15A
- Rated Torque: 150KG.cm
- Output Power: 90W
- Reduce Ratio: 1:80
- Shaft Bore Diameter: 14mm
- Dimension:255*96*115 mm
- Commutation: Brush
- Reversible: Yes
- Lifespan: more than 2000 hours
- Net Weight: 3.98KG
L293D Motor Driver Board for ESP8266 WiFi NodeMcu Lua ESP12E
- Motor power supply Range: 4.5V ~ 36V
- Control power Range: 4.5V ~ 9V (10VMAX)
- Logic Operating current: ≤60mA
- Drive part of the work current Io: ≤1.2A
- Maximum power dissipation: 4W
- Drive Type: Dual high-power H-bridge driver
- Working temperature: -25 ℃ ~ + 125 ℃
- ESP12 DEV KIT development board expansion module
- Lead ESP12 DEV KIT all the features of pins: SPI, UART, GPIO, AI, and 3.3V power connector
- Extend two-way motor-driven, two-way direct-drive motor
- on board power switch
- Motor power, control power separation
- Dimension: 60 x 45 x 13mm
6V 12V 24V 8A PWM DC Motor Speed Controller CCM5D Digital Display LED Motor Controller Speed Regulator
- Input Supply Voltage: 6V-30VDC
- Continuous Current (A): Rated current 5A (8A MAX, cannot be prolonged)
- Maximum Output Power: 240W
- LED display the duty ratio: 0-100%
- PWM Frequency: 16khz
- Duty Cycle adjustable: 0%-100%
- Dimensions: 78*42*25mm
- The display range of 3-digit LED display is "000"-"100".
- Adjustable speed range is 0%-100%
- Fine workmanship and good performance.
- Easy to use.
- Long service life.
- Suitable for the DC motor (or DC load) within 5A, Peak current 8A.
- Incorporate a push key. Push closed, and then push open