24V Dc 1/2″ Brass Electric Solenoid Valve Water Air Fuels Gas Normal Closed New
- Working Medium: Air, Water, Oil, Gas
- Voltage: DC24V, ±10%
- Operating Type: Directly driven
- State: Normally closed
- Flow bore: 16mm
- CV: 4.8
- Pipe Size: 1/2"
- Operating Viscosity: Under 20CST
- Operating Pressure: 0-10 Kg/cm²
- Working Temperature: -5 degrees to 80 degrees C
- Voltage: DC24V, ±10%
- Valve Body: Brass
- Electric lifting magnet
- Powerful and compact
- Smooth and flat surface
24v DC Gear, Geared Offside Motor 75 rpm High Torque
- Voltage : 18v to 30v
- RPM :75 (at 24v)
- Nominal Voltage: 24v
- No- Load Current : 35mA
- Full Load Current:800mA
- Full (Stall) Load Torque: 10kgcm
- Shaft diameter: 6 mm
- The lightweight and compact-sized motor with high performance.
- The Shaft is D type hence wheel/ coupling arrangement is simple.
- Useful for hobbyists and for a DIY project.
- Weight: 150gm
24V Lithium Battery case 350*106*78mm
- Dimensions: 350*106*78mm.
- Suitable for battery type: 24V.
- Battery standard: 18650 lithium battery.
- Charging voltage: 24V.
- Used to install an electric vehicle lithium battery.
- Suitable for electric bicycles, electric bicycles and folding electric vehicles.
- Made up of aluminium alloy and plastic, which is sturdy and durable.
- The product has a charging socket and an output port.
24V RO water solenoid valve
- Operating Voltage: 12V / 24V DC
- Current Requirement: 400 mA
- Connections: Push Fit Type
- Nozzle Diameter: 6.3 mm
- Normally Closed Valve
- Electrical connection: Fast-on tags
- Compact and convenient.
- Easily installed and serviced
- Precise and reliable.
- Pressure-regulating valve
- Suitable for fluids like water, oil, air.
250V Float Switch Sensor for Water Level Controller-Big
- Protection: Waterproof
- Medium Working Pressure: Max 1 Bar
- Circuit Breaking Capacity: Directly KW with 250V
- Medium Temperature: 70 Deg.C.
- Mechanical endurance: ≥100,000 times
- Electrical endurance: ≥500,000 times
- Cable length: 3m
- Corrosion Free,
- Sturdy and durable & need no maintenance.
- No current / voltage is passed through water, therefore no electrolysis or Salt deposition.
- Long life (approximate 10 million operations)
- Rust proof (entire sensor body in polypropylene)
- Used in hard water or fuel such as diesel, kerosene, oil etc.
- Dimensions : 11 x 9 x 5cms
- Weight 690 grams
25pcs Button Switch Kit
- Relative Humidity: 95%
- Rated Voltage: 12V
- Rated Current: 50 mA
- Contact resistance: 50M Ohm Max (initial)
- The insulation resistance: 100M Ohm minDC (250V)
- The compressive strength: AC250V (50/60Hz for 1 minute)
- Mechanical life: 100000 cycles
- The environment temperature: 25° ~ + 105°
- The operating strength: 180/250 (plus or minus 30gf)
- Dimension: 12 * 12 * 7.3 round convex type
- Total Buttons: 25pcs
- Colours: 5 (Black, Red, White, Blue, Yellow)
27.0 MHz 2 Pin Oscillator Crystal
- Crystal Case Type : Metal Can
- Crystal Mounting Type : Through Hole
- Frequency : 27MHZ
- Frequency Stability : ± 50ppm
- Frequency Tolerance : ± 30ppm
- Load Capacitance : 10 pF
- No. of Pins : 2
- Operating Temperature Max : 70 °C
- Operating Temperature Min : -10 °C
- Operating Temperature Range : -10°C to +70°C
275V Metal Oxide Varistor (MOV)
275V S14 Metal Oxide Varistor (MOV)
27C128 128K (16K x 8) CMOS EPROM IC
- 128K (16K x 8) CMOS EPROM
- Access Time: 170ns
- Active Current: 20mA
- Standby Current: 100µA
- Package: DIP-28
- High Level Output Voltage: 2.4V
- Low Level Output Voltage: 0.45V
- Output Leakage Current: 10µA
- Read Current: 100µA
- Input Leakage Current Max: 10µA
- Vcc Current, program & verify:Â 20mA
- Vpp Current, program: 25mA
- Address Set-Up Time: 2µs
- Data Set-Up Time: 2µs