PIC16F676 Microcontroller IC
- 128 bytes of EEPROM Data Memory
- Programmable pull-up resistors
- Individually select able analog channels
- ICD2 programming support or debugging support with optional header adapter
- 8 oscillator sellections including precision 4 MHz RC oscillator with programmable calibration and Power-on Reset
- Program Memory Type:Flash
- Program Memory (KB):1.75
- CPU Speed (MIPS):5
- RAM Bytes:64
- Data EEPROM (bytes):128
- Digital Communication Peripherals:1-UART,
- Timers:1 x 8-bit, 1 x 16-bit
- ADC:8 ch, 10-bit
- Comparators:1
- Temperature Range (C):-40 to 125
- Operating Voltage Range (V):2 to 5.5
- Pin Count:14
- Cap Touch Channels:8
TNY280PN Off-Line Switcher IC
- Drain Voltage: -0.3 to 700V
- Drain Peak Current: 1360mA
- ENABLE Voltage: -0.3 to 9V
- ENABLE Current: 100mA
- ON State Resistance (max): 3Ω
- Output Frequency Max: 140KHz
- Package: DIP-8C
- Energy Efficient Off-Line Switcher
- Simple ON/OFF control, no loop compensation needed
- ON-time extension – extends low line regulation range/hold-up time to reduce input bulk capacitance
- Frequency jittering reduces EMI filter costs
- Pin-out simplifies heat sinking to the PCB
- SOURCE pins are electrically quiet for low EMI
CD4026 CMOS Decade Counter with Decoded 7-Segment Display Outputs
TowerPro MG996R 360 Deg Rotation Digital High Torque Servo Motor
- Gear Type: Metal gear
- Servo Plug: JR (Fits JR and Futaba)
- Weight: 55g
- Dimension: 40.7×19.7×42.9mm
- Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6.0v)
- Operating speed: 0.19sec/60degree (4.8v); 0.15sec/60degree (6.0v)
- Operating voltage: 4.8 ~ 6.6V
- Gear Type: Metal gear
- Dead band width: 1us
- Wire length: 32cm
- Servo arms & screws included, and fit with Futaba servo arm
- It’s universal “S” type connector that fits most receivers, including Futaba, JR, Hitec ,GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum.
- CE & RoHS approved
L293D MOTOR DRIVER
- Can be used to run two dc motors with the same IC
- Speed and direction control is possible
- Supply voltage: 4.5 V to 7V
- Motor voltage: 4.5 v to 36v
- Maximum peak motor current: 1.2 A
- Maximum continuous motor current: 600 milli ampere
- Screw terminal connectors for easy connection
- Transition time: 300 ns (at 5v and 24v)
- High noise immunity inputs
- Automatic thermal shutdown
- Available in 16 pin DIP, TSSOP, SOIC package
- Dimension: 48*34*14mm
- Weight: 15gm
330uf 25V Samsung DC Electrolytic Capacitor (10 Pcs)
22uf 63V Caps DC Electrolytic Capacitor (10 pcs)
Square Geared Motor 30 RPM – High Torque
- Operating Voltage: 12 V DC
- No Load Current: ≤220 mA
- No load Speed30 RPM (at 12V)
- Full Load Current: ≤1300mA
- Rated Current: ≤4800 mA
- Rated Torque: 80Kg-cm
- Shaft Length: 27mm
- Shaft Diameter: 8mm
- Length:92mm
- Dimension Overall: 70 X 70 (Sq.) X 90 (Length)
- Mounting Holes: M5 threading (60 X 60 Square)
- Weight: 490gm
Johnson Geared DC Motor Grade-B 1000 RPM 12V
- Base Motor RPM: 18000
- Operating Voltage: 6-18 V
- Rated Voltage: 12 V
- Rated Torque: 0.8 kg-cm
- Stall Torque: 3.5 kg-cm
- Gearbox Dimensions: 25×37 (LxW) mm
- The motor has sturdy construction.
- Shaft equips metal bushes for long life.
- It comes with High-Quality gears.
- The shaft has a hole for better coupling.
Offside Geared Motor 12V 5 RPM – High Torque
- Voltage : 3v to 12v
- RPM :5.5 (at 12v)
- Nominal Voltage: 12v
- No- Load Current : 20mA
- Full Load Current:800mA
- Full (Stall) Load Torque: 30kgcm
- Shaft diameter: 6 mm
- Motor mounting screw: 4 x M3 and depth 3.5mm
- Motor body Length: 75mm
- Motor Body Diameter: 37mm
- The lightweight and compact-sized motor with high performance.
- The Shaft is D type hence wheel/ coupling arrangement is simple.
- Useful for hobbyists and for a DIY project.
- Weight: 150gm
1000 RPM – 12V CS DC Geared Motor
BTS7960 43A High Power Motor Driver Module/Smart Car Driver Module for Arduino Current Limit
- Input voltage: 6V-27V
- Maximum current: 43A
- Input level: 3.3-5V
- Control mode: PWM or level
- Duty cycle: 0-100%
- Double BTS7960 large current (43 A) H bridge driver
- 5V isolate with MCU and effectively protect MCU
- 5V power indicator on board
- Four lines from MCU to driver module (GND. 5V. PWM1. PWM2)
- Reverse the motor forward, two PWM input frequency up to 25kHZ
- Two heat flow passing through an error signal output
- Dimension: Approx. 4 * 5 * 1.2cm