LF353 JFET Input Dual Operational Amplifier IC
LF356 JFET Input Operational Amplifier IC
Lipo Battery Charger B3
- Input voltage: AC 110V-240V, 50~60Hz
- Charge Current: 1.2A Max
- Cell Cut Off Voltage: 4.2V ± 0.02V
- Circuit Power: 11W ± 10%
- Balance charge current: 850mA
- Display: Green & Red LED
- Built-in power supply
- Case: Plastic
- Max charge power: 10W
- Only charge for 2~3 series LiPo battery
- Automatic charge start
- Simple, reliable, and safe to use
- Dimensions: 88x57x35mm
- Weight:103gm
LIPO Voltage Battery Tester
- Input: 1S-8S Battery
- Battery Type: Lipo/LiFe/Li-ion/LiMn
- Voltage Detection Precision: +/- 0.01V
- Unit Voltage Display Range: 0.5V to 4.5V
- Total Voltage Display Range: 0.5V to 36V
- 1S Test Mode Voltage Range: 3.7V to 30V
- Low voltage alarm mode for 2-8S
- Alarm Set Value Range: OFF~2.7V to 3.8V
- Buzzer Alarm for low voltage indication.
- Useful for measuring each cell voltage.
- It has a mode button at the top for setting the desired voltage value.
- Dimension: 4*2.5*1cm
LM1207N RGB Video Amplifier IC
- Supply Voltage (VCC) 10.8V s VCC s 13.2V
- Supply Voltage (VCC) 15V
- Peak Video Output Source Current 28 mA
- Â Power Dissipation (PD) Â 2.5W
- Temperature Range b20 degree C to 80 degree C
- RGB Video Amplifier System with Blanking
- Matched (±0.1 dB or 1.2%) attenuators for contrast control
- Three externally gated single ended input comparators for cutoff and brightness control
- 0V to 4V, high input impedance DC contrast control (>40 dB range)
- 0V to 4V, high input impedance DC drive control for each video amplifier (-6 dB to 0 dB range)
- Spot killer, blanks output when VCC <10.6V
- Capable of 7 VPPÂ output swing (slight reduction in bandwidth)
- Output stage blanking
- Output stage directly drives most hybrid or discrete CRT drivers
LM124J Quad Operational Amplifier IC
- Internally Frequency Compensated for Unity Gain
- Large DC Voltage Gain 100 dB
- Â Wide Bandwidth (Unity Gain) 1 MHz (Temperature Compensated)
- Wide Power Supply Range: – Single Supply 3 V to 32 V – or Dual Supplies ±1.5 V to ±16 V
- Very Low Supply Current Drain (700 μA) —Essentially Independent of Supply Voltage
- Low Input Biasing Current 45 nA (Temperature Compensated)
- Low Input Offset Voltage 2 mV and Offset Current: 5 nA
- Input Common-Mode Voltage Range Includes Ground
- Differential Input Voltage Range Equal to the Power Supply Voltage
- Large Output Voltage Swing 0 V to V + − 1.5 V
- Low Power Quad Operational Amplifier
- Input Offset Voltage (max):Â 5mV
- Input Offset Current (max):Â 30nA
- Input Bias Current (max):Â 150nA
- Operating temperature (max): 1250C
- Output Current (max):Â 2mA
- CMRR (min):Â 70dB
LM1267 RGB Video Amplifier IC
- 150 MHz I2C Compatible RGB Video Amplifier System with OSD and DACs
- Programmable 110 MHz to 150 MHz bandwidth preamplifier with full video signal parametric control
- 4 external 8-bit DACs for bus controlled Bias and Brightness
- Suitable for use with discrete or integrated clamp, with software configurable Brightness mixer
- Power Save (Green) Mode, 80% power reduction
- Matched to LM246X driver
- Temperature Range 0ËšC to 70ËšC
- Supply Voltage (VCC) 4.75V < VCC < 5.25V
- Video Inputs 0.0V < VIN < 1.0VP-P
- Thermal Resistance to Case (θJC) 32˚C/W
- Junction Temperature (TJ) 150ËšC ESD Susceptibility (Note 4) 3.5 kV
- ESD Machine Model (Note 5) 350V
- Storage Temperature −65˚C to +150˚C
- Lead Temperature (Soldering, 10 sec.) 265ËšC
- Thermal Resistance to Ambient (θJA) 51˚C/W
LM1269 RGB Video Amplifier IC
- 110 MHz I2C Compatible RGB Video Amplifier System with OSD & DACs
- 110 MHz bandwidth preamplifier with full video signal parametric control
- 4 external 8-bit DACs for bus controlled Bias and Brightness
- Suitable for use with discrete or integrated clamp, with software configurable Brightness mixer
- Power Save (Green) Mode, 80% power reduction
- Matched to LM246X driver
- Temperature Range 0ËšC to 70ËšC
- Supply Voltage (VCC) 4.75V < VCC < 5.25V
- Video Inputs 0.0V < VIN < 1.0VP-P
- Thermal Resistance to Case (θJC) 32˚C/W
- Junction Temperature (TJ) 150ËšC
- ESD Susceptibility (Note 4) 3.5 kV
- ESD Machine Model (Note 5) 350V
- Storage Temperature −65˚C to +150˚C
- Lead Temperature (Soldering, 10 sec.) 265ËšC
LM1458 Dual Operational Amplifier IC
- High Performance Dual Operational Amplifier
- Differential Input Voltage: ±30V
- Input Offset Voltage Max:Â 6mV
- Input Offset Current Max:Â 200nA
- Input Bias Current Max:Â 500nA
- Common-Mode Rejection Ratio:Â 90dB
- Max. Power Dissipation:Â 500mW
- Output Resistance: 75Ω
- Rise Time: 0.3µs
- No Frequency Compensation Required
- Low-Power Consumption
- Short-Circuit Protection
- Wide Common-Mode and Differential Voltage
- No Latch Up When Input Common Mode Ranges Range is Exceeded
- Package:Â DIP-8
LM1875 20W Audio Power Amplifier IC
- 20W Audio Power Amplifier
- AVOÂ typically 90 dB
- Low distortion: 0.015%, 1 kHz, 20 W
- Wide power bandwidth: 70 kHz
- Protection for AC and DC short circuits to ground
- Thermal protection with parole circuit
- High current capability: 4A
- Wide supply range 16V-60V
- Internal output protection diodes
- 94 dB ripple rejection
- Plastic power package TO-220
LM1876 Dual 20W Audio Power Amplifier IC
- Dual 20W Audio Power Amplifier with Mute and Standby Modes
- Spike Protection
- Minimal amount of external components necessary
- Quiet fade-in/out mute mode
- Standby-mode
- Isolated 15-lead TO-220 package
- THD+N at 1 kHz at 2 x 15W continuous average output power into 4Ω or 8Ω: 0.1% (max)
- THD+N at 1 kHz at continuous average output power of 2 x 20W into 8Ω: 0.009% (typ.)
- Standby current:Â 4.2 mA (typ.)
