74366N Tri-State Hex Buffer IC
- Tri-State Hex Buffer
- High-level output voltage:Â 3.1V
- Low-level output voltage:Â 0.4V
- High-level output current:Â -5.2mA
- Low-level output current:Â 32mA
- Input clamp voltage:Â -1.5V
- Propagation delay time max:Â 90ns
- Typical power dissipation:Â 295mW
- Supply voltage range:Â 4.75 to 5.25V
- Package:Â DIP-16
455 KHz 2 Pin Crystal Oscillator
TOP243PN Off-line Switcher IC
- Supply Current: 1.6 mA
- Supply voltage range: 85-265VAC
- Power: 25W
- Output Voltage: 12 V
- Switching Frequency: 132 kHz
- Package: TO-DIP-8
- Extended power range for higher power applications
- Â No heatsink required up to 34 W using P/G packages.
- Â Features eliminate or reduce cost of external components.
- Fully integrated soft-start for minimum stress/overshoot.
- Â Externally programmable accurate current limit.
- Â Wider duty cycle for more power, smaller input capacitor .
- Separate line sense and current limit pins on Y/R/F packages
CD4089BE CMOS Binary Rate Multiplier IC
CD4038BE CMOS Triple Serial Adder IC
5Q1265 Power Switch IC
- Power Switch
- Drain Voltage: 650V
- Drain Current: 28A
- Supply Voltage: 40V
- Supply Current: 18mA
- Precision fixed operating frequency (100/67/50kHz)
- Low start-up current (typ. 100µA)
- Pulse by pulse current limiting
- Over-current protection
- Overvoltage protection (Min. 25V)
- Internal thermal shutdown function
- Under voltage lockout
- Internal high voltage sense FET
- Auto-restart mode
DLO165 Power Switch IC
- Power Switch
- Supply Voltage Max.: 20V
- Total Power Dissipation: 1.25W
- Drain-Source Voltage: 650V
- On-State Resistance Max.: 10Ω
- Rise Time : 4ns
- Rise Time: 10ns
- Output Frequency Max.: 55KHz
- Duty Cycle Max.: 83%
- Operating Current Max.: 5mA
- Over Voltage Protection Min.: 18V
- Precision fixed operating frequency (100/67/50kHz)
- Low start-up current (typ. 100µA)
- Pulse by pulse current limiting
- Over-current protection
- Overvoltage protection (Min. 25V)
- Internal thermal shutdown function
- Under voltage lockout
- Internal high voltage sense FET
- Auto-restart mode
L298N Dual Full-Bridge Driver IC
- Dual full-bridge driver
- Operating Supply Voltage up to 46V
- Total DC Current up to 4A
- Low Saturation Voltage
- Over Temperature Protection
- Logical "0" Input Voltage up to 1.5V (High Noise Immunity)
- Power Supply:Â 50V
- Logic Supply Voltage:Â 7V
- Input and Enable Voltage:Â -0.3 to 7V
- Non Repetitive Peak Output Current:Â 3A
- Total Power Dissipation: 25w
L297 Stepper Motor Controller IC
L293D Push-Pull Four Channel Driver IC
- Push-Pull Four Channel Driver with Diodes
- 600mA Output Current Capability Per Channel
- 1.2A Peak Output Current (Non Repetitive) Per Channel
- Over Temperature Protection
- Internal Clamp Diodes
- Supply Voltage:Â 36V
- Enable Voltage:Â 7V
- Peak Output Current:Â 1.2A
- Total Power Dissipation:Â 4W
- Output Current:Â 600mA
- Package:Â DIP-16
CD4016 Quad Bilateral Switch IC
IRS2110 High and Low Side Driver IC
- High Side Floating Supply Voltage Max.: 520V
- Logic 1 input voltage Min.: 9.5V
- Logic 0 input voltage Max.: 6V
- High level output voltage Max.: 1.2V
- Low level output voltage Max.: 0.15V
- Total Power Dissipation: 1.6W
- Propagation delay Max.: 160ns
- Rise Time Max.: 35ns
- Fall Time Max.: 25ns
- Package: DIP-14