Showing 13–19 of 19 results


₹3,750.00 inc. GST
  • IC: Atmega644 PA
  • Gyro/Accelerometer: Auto-level: Yes
  • Input Voltage: 4.8-6.0V
  • AVR interface: standard 6 pins.
  • The signal from Receiver: 1520us (5 channels)
  • Signal to ESC: 1520us
  • LCD size: 24*18mm
  • Mini buttons size: Four 3.3*4.2mm
  • Mounting holes: 30.5x30.5mm
  • Voltage sensor: One red positive pin header for.
  • Input rail: Single row 2.54mm pitch pin header for input signal
  • Firmware Version: 1.6
  • Dimension: 36x36x11.5mm

KK2 1.5 Flight Control

₹4,500.00 inc. GST
  • IC: Atmega644 PA
  • Input Voltage: 4.8V-6.0V.
  • AVR Interface: Standard 6 Pin.
  • The signal from Receiver: 1520us (5 channels)
  • Signal to ESC: 1520us.
  • Gyro/Accelerometer: MPU 6050
  • Auto Level function
  • Firmware Version: 1.6
  • Dimension: 50.5mm x 50.5mm x 12mm

Landing Gear

₹500.00 inc. GST
  • Colour: black
  • Material: ABS Plastic
  • Length: 200mm
  • Ground Clearance:200 mm
  • Compatibility: Q450 and S500 Frames
  • Good-Quality Landing Gears
  • Skidproof landing gears
  • Dimensions : 10 x 8 x 4 cm
  • Weight:230gm

Mini OSD W/ KV Team MOD For Racing F3 Naze32 Flight Controller RC Drone

₹850.00 inc. GST
  • NO DC/DC converter, hence less heating
  • FTDI cable compatible pinout
  • Standard 6-pin ISP header
  • Two LED indicators
  • ATmega328P with Arduino bootloader
  • MAX7456 monochrome on-screen display
  • Pad for an Analog or Digital PWM RSSI signal
  • Pad for the connection of a Current Sensor
  • ATmega328P with Arduino bootloader
  • Standalone, or with APM / Flip / Flip32+ flight controllers
  • These modifications allow direct connection of two batteries (up to 4S)
  • This hardware takes the hardware mods for this firmware and builds them into an RTF solution.
  • This Board can be used just as a normal OSD for APM or it can be used with MWC KV Team Mod.
  • Two independent power sections with an LED indicator on each.
  • Solder jumpers for combining the power sections
  • Solder jumper for PAL video option
  • +5V 500mA regulator for up to +12V supply input
  • Exposed test points for HSYNC and LOS ATmega328P with Arduino bootloader.
  • Dimension: 16 x 16mm


₹749.00 inc. GST
  • Input Voltage: 2-3S LIPO
  • Working Current: 12A
  • Burst current (10S): 15A
  • BEC: 5V / 1A Programmable: Yes
  • With stable performance, it is practical and durable
  • Offer you high compatibility, reliability, and stability
  • Throttle range can be set to be compatible with different receivers.
  • Equipped with built-in linear BEC or switch BEC.
  • Easy to install and convenient to use
  • Play a significant role in driving and controlling the motor to complete all kinds of instructions
  • Suitable for 250 Mini four-axis and F330 aircraft, etc
  • Max speed: 210,000 rpm for 2-pole, 70,000 rpm for 6-pole, 35,000 rpm for 12-pole.
  • Dimensions:38 x 20 x 6 mm
  • Weight: 30g

Q330 Quadcopter Frame

₹1,049.00 inc. GST
  • Colour: Black & Red
  • Wheelbase: 325mm
  • Frame Diameter: 330mm
  • Frame Spacing: 30mm
  • Recommend to use 3S 2200-4000mah Lipo battery
  • Glass fibre material on centre plates
  • Glass-filled nylon arms for increased strength and durability
  • Lightweight arm design
  • Integrated PDB for easy wiring and tidy installation
  • Increased internal space for additional electronics/equipment
  • Additional mounting holes for frame upgrades
  • Suitable for CC3D\MWC\APM\PIXHAWK\NAZA flight control
  • Recommend to use 2204/2205 + 6045propeller + 12A ESC, violate flying recommend to use 2208 motor + 20A ESC + 8045 propeller
  • Dimension: 21.5*10.5*5cm
  • Weight: 231g

QAV250 Quad-copter Frame

₹799.00 inc. GST
  • Item name: QAV250 Frame Kit
  • Arm plate thickness: 3mm
  • Main material: 3k carbon fibre
  • Wheelbase: 250mm
  • The arm equips dampers for a safe landing.
  • The arm has multiple motor mounting holes.
  • Equips vibration-free mounting bracket for FPV camera.
  • Recommend Propeller: 5 inch
  • Recommend Motor: 1806 2204 2206
  • Recommend ESC: 8A-12A
  • Recommend Battery: 1300Mah-2200Mah