ReadytoSky 12A Series Multirotor Electronic Speed Controller based on Simonk firmware. It offers a faster response compared to normal ESC firmware. These highly recommended ESCs are meant for use in multi-rotor aircraft like QAV180 210 250 ZMR250 Quadcopter. SimonK ESC 12A (ELECTRONIC SPEED CONTROLLER) is capable of driving motors that consume up to 12A current. It works on 2S-3S LiPo batteries. An on-board BEC is present in which provides regulated 5V (1A max draw). Thus it powers the flight controller and other onboard modules which consume current up to 12A. This 12A Brushless ESC Electronic Governor Supports 1-3S Small Axis.
Simonk ESC 30A features a throttle calibration function. Throttle range can be configured to be compatible with different receivers, providing very good low-speed performance. This helps you to adapt to different remote throttle travel differences and improve throttle response smoothly. As it provides low voltage protection, the motor will not start immediately, regardless of the throttle stick in any position. ReadytoSky 12A Series Multirotor ESC features over-heat protection and self-check functions. Hence offers you high compatibility, reliability, and stability of the motor. Moreover, MR.RC 12A ESC requires an external power supply for the microcontroller unit and the BEC. Thus 12A series ESC plays a significant role in driving and controlling the motor to complete all kinds of instructions. The ESC parameters are set via the program card or the transmitter. ReadytoSky 12A Series Multirotor Electronic Speed Controller is suitable for 250 Mini four-axis and F330 aircraft, etc.