PL2303 6 pin USB to TTL RS232 convert serial cable
• Supports RS-232 serial interface with Programmable baud rate from 75 bps to 12 Mbps
• Compatible with the RS422/RS485 interface
• Extensive flow control mechanism like adjustable high/low watermark level, automatic hardware or software flow control, and inbound data buffer overflow detection.
• The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB
• The TTL-232R cables are a family of USB to TTL serial UART converter cables incorporating FTD’s FT232RQ USB to Serial
• Cables are FCC, CE, RoHS compliant and are available at TTL levels 3.3V
• It is USB 2.0 full speed compatible. The USB side of the cable is USB powered.
MDL_2 Obd2 Elm327 16 Pin Male to Female Extension Diagnostic Extender Cable
- OBDII 16 Pin Extension Cable Adapter Male to Female.
- Suitable for 16 Pin Advanced Bluetooth OBD-II Car Diagnostic Auto Interface Scanner.
- Can save the wear and tear on your scan tool's OBD connector.
- Multiple cables can be daisy-chained together to achieve longer lengths.
- Compatible diagnostic tools with a 16 pin socket
- Flexibility and durability.
- Length: 5 Meter
SMA Pigtail Cable To Ufl Extension Cable 1.13 Cable
HDMI Male to VGA Female Converter Adapter 1080P For PC, Rspberry Pi
- Support HD resolution, super clear picture, fast transmission speed
- The maximum signal range up to 1920 X 1200, 1080p;
- Video input signal: 5Volts p-p(TTL) ;
- Support VGA video bandwidth: 10 bit, 162MHz
- Video amplifier bandwidth: 162MHz
- Support resolution up to 1920 X 1200, reduce blank signal during transmit.
- No external power supply, plug, and play.
1.5 metre RJ45 Network Extension Cable
RIBBON CABLE
MOQ : 1 m
- Rate temperature: 105°C
- Rated voltage: 300V
- Average tensile strength: 1500 lbs
- Spark test: 2500V
- Dielectric strength test: Minimum 2 KV in 1 minute
- Conductor resistance: Maximum 237Ω/km
- Insulation resistance: Minimum 100 MΩ-km
- Capacity: 44pF/m (G-S-G)
- Inductance: 1.45μH/m
- Characteristic Impedance: 105Ω (G-S-G)
- Propagation delay time: 4.2 ns/m
- Â Durable and reusable
- Easy to install and use
- A popular choice for construction or repair
- Useful for the electronic project and Genuine Arduino product
MALE TO MALE JUMPER WIRES
MALE TO FEMALE JUMPER WIRES
FEMALE TO FEMALE JUMPER WIRES
Arduino Uno/Mega Usb Cable (USB A To B)
- USB Type: Type-A to Type-B
- Length: 1 meter
- Gold Plated Connector
- Fully compatible with the PC.
- Molded strain relief and PVC over-molding to ensure a lifetime of error-free data transmissions
- Fully compatible with the PC.
- Moulded strain relief and PVC over molding to ensure a lifetime of error-free data transmissions.
- Aluminium under mould shield helps meet FCC requirements on KMI/RFI interference.
- Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference
- Weight: 80 gm.
USB 2.0 Type A Male to USB A Male Cable
- USB 2.0
- Length:1m
- A-A male cable type
- Blue colored cable
- Standard USB 2.0 cable assembly, Type A male to type A male
- signaling rate: 480 Mbit/s (60 MB/s) Connector Type: USB 2.0 Type A Male to Type A Male
- High quality USB 2.0 high speed cable. Usually used for some external drive enclosures or cameras.
- Fully Compatible with USB 1.0,1.1 , Supports data transfer rate at up to 480Mbps
- Supports plug play connections for devices such as external hard drives, modems, printers, scanners, VOIP devices other USB peripherals.
- It is plug & play and hot swappable (no need to turn off your PC to plug a device in or out).
A-Male to A-Female USB 2.0 Extension Cable (150cm)
- Hi-Speed 480 mbps With 3g Dongle Support.
- Easy to operate, bring you great convenience.
- Made of high-quality Material
- USB 2.0 A Male to A Female Extension Cable.
- A-male to A-female USB cables are typically used to extend the reach of your existing USB A/B cable, or to use USB device such as memory stick on your desk instead of inserting it to the back of PC
- Left connector type: USB 2.0.
- Left connector gender: Male.
- Right connector type: USB 2.0.
- Right connector gender: Female
Serial RS-232 9 Pin Cable Male to Male
- Connector Type: DB9 Male to DB9 Male.
- Cable diameter: 6mm
- Cable length:1.5m
- Fully shielded to prevent unwanted EMI/RFI interference.
- Fully molded connectors with thumbscrews provide quick and easy connection.
- All lines wired straight through.
- Used for extending a 9 pin serial male to male cable, or connect it to an old serial port device along with a serial to USB converter
- Shielded with standard Foil-Al layer shielding as in most cables
Serial RS-232 9 Pin Cable Male to Female
- Connector Type: DB9 Male to DB9 Female.
- Cable diameter: 6mm
- Cable length:
- Fully shielded to prevent unwanted EMI/RFI interference.
- Fully molded connectors with thumbscrews provide quick and easy connection.
- All lines wired straight through.
- Used for extending a 9 pin serial male to male cable, or connect it to an old serial port device along with a serial to USB converter
- Shielded with standard Foil-Al layer shielding as in most cables
A-to-Mini B USB-2.0 Cable for Arduino Nano
- USB Type: Type-A to Mini-B
- Weight: 100 gm.
- Length: 1.35 m.
- Nickel-Plated Connector
- Exclusively designed for Arduino boards.
- Exclusively designed for Arduino boards.
- Mini-USB cables are designed to connect from the USB port on a hub, PC or Mac to a USB device, including digital cameras, mobile phones, and PDAs.