I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-14%
1 Pole 7 Way Rotary Switch Metal
Original price was: ₹30.00.₹25.00Current price is: ₹25.00. inc. GST
4 Pole 3 Way Rotary Switch Plastic
Original price was: ₹80.00.₹60.00Current price is: ₹60.00. inc. GST
1 Pole 7 Way Rotary Switch Plastic
Original price was: ₹35.00.₹30.00Current price is: ₹30.00. inc. GST
- 1 Pole 7 Position design
- ceramic structure
- Easily turned.
- Widely used on radio, TV, industrial machine control unit, or other electronic devices
Description
A rotary switch is a switch that controls distinct circuit operations by permitting rotation. A Rotary switch accomplishes this by having a spindle or “rotor” with a contact arm or “spoke” that protrudes from its surface like a cam. It also features a ring of terminals that surrounds the rotor in a circle. Each terminal can operate as a contact point for the “spoke.” Any of a number of different electrical circuits can be linked to the rotor in this fashion.
The advantage of a rotary switch is that it may be laminated to employ many poles. Each layer corresponds to one pole. Rotary switches, in most cases, feature a detent mechanism. As a result, rather than stalling in an intermediate position, it “clicks” from one active position to the next. Rotary switches, as a result of these characteristics, can give larger pole and throw capabilities than basic switches.
The spindle
In a rotary switch, the current passes via a spinning spindle that contains numerous distinct rotors. When the switch is in a given position, an arm protruding outward from each rotor will make contact with a terminal. A switch can have dozens of positions, each of which is generally associated with a distinct circuit.
Controlling the Switch
It is just necessary for the rotary switch to be in the precise position for it to appear on a certain circuit. A rotor that rotated too freely would be difficult to control and might easily be switched off or tossed to the wrong position. To prevent this, rotary switches feature a detent mechanism that causes the switch to “click” into place and stay in that position until it is turned with adequate effort. A detent is a wheel that is mounted to the rotor and has notches or grooves. A needle bearing with a spring or a sliver of spring steel is pressed against the wheel. Rotary switches, as a result of these characteristics, can give larger pole and throw capabilities than basic switches.
Reviews (0)
Shipping & Delivery
Related products
ADXL 335 Accelerometer IC
- 3-axis sensing
- Small, low profile package
- 4 mm × 4 mm × 1.45 mm LFCSP
- Low power : 350 μA (typical)
- Single-supply operation: 1.8 V to 3.6 V
- 10,000 g shock survival
- Excellent temperature stability
- BW adjustment with a single capacitor per axis
- RoHS/WEEE lead-free compliant
- 8V- 3.6V single-supply operation
- Integrated X, Y, and Z axis accelerometer on a single chip
- X and Y axis has a 0.5Hz to 1600Hz bandwidth
- Z axis has a 0.5Hz to 550Hz bandwidth
- Hermetically sealed for temp and humidity resistance
Dual Micro USB 3.7v to 5V 2A Power Bank DIY 18650 LiPo Charger
- 4-level LED lamp display power, not working state intelligent automatic shutdown;
- The built-in lithium battery protection IC, over-current, under-voltage protection;
- Dual USB output ports.
- Dimensions: 68 x 34 x 9 mm (LxWxH)
- Weight: 10 gm
- Input port: MicroUSB (Andro)
- Input requirements: 5V constant voltage power supply can do charge input power, the most matching charger for 5v1a above
- Output port: USB
- Output parameters: 5V1A/5V2A
- Requirements for rechargeable batteries:
- Compatible Batteries: 18650 batteries, cell phone batteries, flat-panel batteries, MP3 batteries, etc. 3.7v-4.2V polymer Lithium battery,
HX711–24 Bit Analog to Digital Converter (ADC)
- It is an ADC converter with two differential input channels
- An active-low noise PGA is integrated inside the chip which provides the gain of 32, 64 and 128
- It has a power-on-reset capability which simplifies digital interface initialization.
- All controls to the IC are made through the pins. Programming is not needed.
- You can select a data rate of 10SPS or 80SPS at the output.
- Provides simultaneous supply rejection of 50Hz and 60Hz supply.
- Built-in analog power supply regulator
- The voltage supply range is from 2.6V to 5.5V
- The temperature range is from -40 °C to +85℃
IR LED Sensor
- Size: 5mm LED
- Wavelength: 940nm wavelength (most commonly used)
- Forward current (IF) is 100mA (normal condition) and 300mA (max.)
- 5A of surge forward current
- 24v to 1.4v of forward voltage
- Temperature : -40 to 100 ℃
- Soldering Temperature should not exceed 260 ℃
- Power Dissipation of 150mW at 25℃ (free-air temperature) or below
- Spectral bandwidth of 45nm
- Viewing angle: 30 to 40 degree
- High Reliability
- Excessive radiant intensity
- Having lead spacing of 2.54mm
- Easy to use with breadboard or perf board
TP5100 4.2v 8.4v Single Double Lithium Battery Charge Management Li-ion Battery Compatible 2A Charging Board
- Input voltage: 5-15V DC power supply.
- Charge status: full and unloaded blue lights, charging red.
- Double 8.4v / 4.2v lithium rechargeable single .
- Programmable charge current. 0. 1A-2A .
- Programmable steady precharge current 10% -100%.
- Wide operating voltage, maximum reach I8V.
- Red and green LED charge status indicator.
- Chip temperature protection, overcurrent protection, under voltage protection.
- Battery temperature protection, reverse battery shutdown, short circuit protection.
- Switching frequency 400Khz, usable inductance 20uH and more.
- PWR_ON Power battery for switching control.
Reviews
There are no reviews yet.