I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
5000W Super Power Thyristor Electronic Voltage Regulator, Adjust Light Speed Temperature
₹800.00 Original price was: ₹800.00.₹700.00Current price is: ₹700.00. inc. GST
- Operating Voltage: AC 220 VDC
- Maximum Power: 10000W
- Voltage Range: AC 0-220V (adjust temperature or light)
- Controller Size: 95.7*56.7*53.8mm
- Panel Size: 74.6*59.8*2.3mm
- Cable Length: 287mm
- New two-way high-power SCR, max current up to 80A.
- Voltage regulator with the peak voltage absorption circuit effectively protects the high-power SCR and has a longer service life.
- Built-in heat sink, thickened to increase the heat sink, good heat dissipation, easy to install.
- 57A high current terminal block, simple wiring, strong button adjustment stability.
- Omron original tact switch, Fairchild original photoelectric coupler, all metal film resistors are stable and durable.
- The value is automatically saved. After power-on, it will automatically start to the last adjusted value.
- Weight: 200gm
5000W Super Power Thyristor Electronic Voltage Regulator designed specifically for Adjusting Light Speed Temperature. It comes with a new two-way large power silicon-controlled rectifier and offers a current up to 80A. Thus it is a good solution to the over-current of electric stove wire caused by low resistance during cooling. It can easily adjust the output voltage on a scale of 0-100% (nonlinear) to power electric device. These power thyristor designed with large and thick heat sink that would enhance heat dissipation. This voltage regulator adjusted with button which is much more stable than potentiometer.
The peak voltage absorption circuit that can protect the high power thyristor ensures long-life for this voltage regulator. These are very prominent and convenient devices, with 2-way high-power silicon controlled. And thus need not add any external components. SCR Voltage Regulator mainly used in water heater heat transfer, lighting dimming, small motor speed, electric iron thermostat and so on.
Application:
- The new two-way high-power SCR, with a maximum current of 80A, is an ideal solution to the problem of over-current electric wire when cooling is insufficient to generate resistance.
- For the usage of electrical appliances, easily modify the output voltage mains in any adjustment range from 0-100 percent (220V 100 adjustment points, non—). Electric furnaces, water heater heating, lights dimming, tiny motor speed control, and electric iron temperature control are just a few examples. As a result, the effects of dimming, temperature regulation, and pressure regulation can be achieved.
- Used in big appliances with fewer than 10,000 watts of electric power. Because the power has been abundant, common household appliances or small factories are suitable for usage. (Power from inductive or capacitive loads should be minimised; this regulator has a two-way high-power SCR that can be utilised without any additional components, making it highly handy and practical.)

Related products
125 KHz RFID CARD THICK
40A DC MOTOR SPEED REGULATOR PWM CONTROLLER 2000W
- Speed controller model: 40A PWM DC motor speed regulator
- Operating voltage: 10V TO 50V
- Peak current: 40A
- Control power: 0.01-2000W
- Quiescent current: 0.025A
- PWM regulation: 5-100%
- PWM frequency: 12KHz
- Operating temperature: -20 degree to 40 degree Celsius
- Stability in working
- High efficiency
- potentiometer used for speed adjustability
- Dimension: 9*5.1mm
- Weight: 95gm
5000W Thyristor Voltage Regulator, Adjust Light Speed Temperature
6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle
- Operating voltage: 6 - 30V DC
- 1 Channel delay trigerred relay module
- Delay time: 0.1 second ~ 999 minutes
- Seven Segment Display
- Operating voltage: DC 6V-30V (supports micro USB 5V power supply)
- Trigger signal source: high-level trigger (3V-24V) signal ground and system to improve the system's anti-jamming capability (also short-circuit altogether)
- Output capability: it can control the device within DC 30V 5A or within AC 220V 5A
- Quiescent current: 20mA
- Operating current: 50mA
- Service life: more than 100,000 times
- Working temperature: -40°C-85°C
- With optocoupler isolation, enhanced anti-jamming capability, industrial grade circuit board, set parameters for memory after power failure.
- Dimension: 6.2 * 3.8 * 1.7cm
DC 12V Thermoelectric Peltier/TEC based Refrigeration Cooler kit
- Semiconductor Chilling Plate: TEC1-12706
- Size: 40 * 40 * 3.75mm
- Internal Resistance: 2.1~2.4Ω
- Temperature Difference: 67°C Above
- Rated Voltage: 12V(Vmax. 15V, Starting Current 5.8A)
- Working Current: Imax.=4~4.6A(Rated 12V)
- Refrigeration Power: Max. 50~60W
- Working Environment: -55~83°C
- Sealing Process: Standard 704 silicon rubber sealing all sides
- Fan: DC 12V 0.15A
- Conduction Module Size: 60 * 45 * 21mm
- Radiator Size: 116 * 100 * 23mm
- Fan Size: 90 * 90 * 25mm
- This Kit Having TEC-12706(Max 6Amp Current) Module.
- Recommended Power supply 12V 5Amp to 10Amps
- Do not use/test/operate TEC without Heatsink & Fan.
- The conduction cool module can frost when the temperature is under -25°C.
Kapton Polyimide Heat Resistant/High Temperature/Thermal Tape/SublimationTape 12mm
- Color: Tawny
- Substrate material: Polyimide polymers film
- Glue Type: Silicone
- Substrate material thickness: 0.025mm
- Thickness with adhesive: 0.05mm
- Heat resistance: about 280°C
- Size:1/2" x 100ft (13mm*30m)
- Elongation: 35 %
- Temperature Range:-73°C – 260°C (-99°F - 500°F)
- High insulation, high temperature resistance, acid and alkali-resistance, low electrolysis, mechanically sound, crocking resistance, tear-resistance, without rest on surface when tear.
- Ideal for protecting sensitive printed circuit board (PCB) components,great for sublimation, HTV, heat press and heat transfer.
- Also extensive use as electrical insulation for transformer, motor, coil, capacitor and frequency conversion power supply in electronic industry.
LOAD CELL 10 Kg
- Capacity: 10Kg
- Rated output(MV/V): 2.0±0.15
- Accuracy class: C2
- Maximum number of load cell verification intervals(N max): 2000
- Minimum number of load cell verification intervals(Vmin): E Max/5000
- Combined error(%RO): <±0.030
- Creep(%RO/30min): 0.03
- Temperature effect on sensitivity(%RO/°C): 0.0016
- Temperature effect on zero(%RO/°C): 0.003
- Zero balance(%RO): 1.0
- Input resistance(O): 402±6
- Output resistance(O): 350±3
- Insulation resistance(MO<50V>): 5000
- Recommended excitation voltage(V): 10~15
- Compensated temperature range(°C): -10~+40
- Operating temperature range(°C): -35~+80
- Safe overload(%RO): 150
- Ultimate overload(%RO): 200
- Load cell material: Aluminium
- Connecting cable: ø4.2*350mm
- Dimensions : 15.9 x 14.1 x 2.7 cm
- weight: 190gm
RFID Tag Key Fob Keyfobs 125Khz
- Material: ABS
- Response Frequency: 125Khz
- 2kbps ASK
- Diameter: ~29mm
- Range: 0-10 cm
- Manchester encoding
- 32-bit unique ID
- Uses TK4100 chip which is compatible with EM4100
- 64-bit data stream [Header+ID+Data+Parity]
- Read Time: 1-2ms
- Operating Temperature: -20c ~ 85 degree C
- Endurance:> 100,000 times
- 64-bit data stream [Header+ID+Data+Parity]
- Designed for the RFID 125KHZ duplicator. can copy all the ID card, such as Access Card, District Card, Parking etc
- Dimension: 43.7×30.5×5.3mm

Reviews
There are no reviews yet.