I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-17%
Back to products
4 WIRE RESISTIVE TOUCH SCREEN MUX BREAK OUT BOARD
Original price was: ₹700.00.₹400.00Current price is: ₹400.00. inc. GST
128*64 GREEN (LCD DISPLAY MODULE)
Original price was: ₹1,500.00.₹1,250.00Current price is: ₹1,250.00. inc. GST
- Display: 128*64 dots
- Display Type: Positive Transflective
- Display mode: STN/yellow green
- Viewing direction: 6 o clock
- Power supply: +5V
- Driving Voltage: single power
- Driving method: 1/64 duty cycle,1/9 bias
- Weight: 400gm
- Dimensions: 7*7*5cm
- NO of data lines: 8 bit parallel
Description
Displaying information is one of the crucial steps in electronic projects. So using LCDs has always been one of the most popular ways to display information. LCD modules designed as the most prominent as they are low cost and program friendly, hence these modules are commonly used in the embedded system. This is a chip on board character graphical LCD with yellow-green color backlight of 128*64 dots. This is a simple and clear type LCD with a simple command interface commonly used in electronics projects and robotics. In this, each LCD requires a controller to execute its internal operations. This character graphical LCD can displays alphanumeric as well as graphics also, thus it is highly suitable in animations.
The functioning of this Graphic LCD 128×64 divided into two equal halves, each half controlled by a separate KS0108 controller. This display module works on 5V and has a green backlight which can be on or off as per requirement. This module consists of a minimum of 6 I/O pins to interface this LCD screen. Moreover, it can work in both 4 bit and 8-bit MCU interfaces. Moreover, it small and light appearance makes it perfect for a wide range of applications such as copiers, fax machines, laser printers, industrial test equipment, networking equipment.
Reviews (0)
Shipping & Delivery
Related products
16*1 GREEN (LCD DISPLAY MODULE)
- Operating voltage: 5V
- Display format: 16 characters * 1 line
- Display mode: STN or FSTN
- Dot-matrix: 5*8 dots
- Character size: 3.07 * 6.56mm
- Character pitch: 77 * 6.56mm
- LCD driver IC: ST7066U
- 1/16 duty cycle
- Polarizer mode: Transmissive
- Each character build by 5*8 pixels
- Works on both 8-bit parallel interface
- Operating temperature: -20 degree to 70 degree Celsius
- Low Current consumption
- Alphanumeric display
- Dimension: 80*36*13.2mm
- Compact size and lightweight
16*2 WHITE (LCD DISPLAY MODULE)
- Input voltage: 4.7V TO 5.3V
- Operating voltage: 5V
- View angle: 6 o clock
- Current supply:1.1
- Maximum supply current:2.5
- 1/16 duty cycle
- Input leakage current:1micro ampere
- Chip on board IC
- Rise time:200 to 250ms
- Fall time: 300 to 350ms
- Controller: SPLC780D
- Each character build by 5*8 pixels
- Consist of 2 rows with each row has 16 characters
- Works on both 8 bit and 4 bit
- Operating temperature:0 degree to 50 degree Celsius
- Storage temperature: -10 degrees to 50 degree Celsius
- Low Current consumption
- Alphanumeric display
- Dimension: 69.5*14.5mm
- Compact size and lightweight
- Easy to interface
20/4 GREEN (LCD DISPLAY MODULE)
- Operating voltage: 5V
- Display format: 20 characters * 4 line
- Display mode: STN or FSTN
- Dot-matrix: 5*8 dots
- Character size: 2.95 * 4.75mm
- Character pitch: 3.55 * 5.35mm
- LCD driver IC: ST7066U
- 1/16 duty cycle
- Wide viewing angle and high contrast
- Works on both 8-bit parallel interface
- Operating temperature: -20 degree to 70 degree Celsius
- Low Current consumption
- Dimension: 98*60*13.6mm
- Compact size and lightweight
3.5” TFT for Raspberry Pi
- Operating Voltage: DC 5V.
- Touch Screen Controller: XPT2046
- Resistive touch.
- Dimension: 3.5 inch
- Resolution: 320×480 pixel
- Colors:65536
- Backlight: LED
- LCD Type: TFT
- LCD Interface: SPI
- Compatible with any version of the raspberry pie
- Drivers provided (works with your own Raspbian/Ubuntu/Kali)
- Compatible with Raspberry Pi A, B, A+, B+, 2B, 3B, 3B+,4B versions
- Size perfectly fits the Pi
- High-quality immersion gold surface plating
- Supports Raspbian system, Ubuntu system, kali Linux system
- Support software keyboard (system interaction without keyboard/mouse)
- Dimension: 10 x 8 x 4 cm
- Weight: 150 Grams
3D printer 128×64 Smart LCD controller for ramps 1.4
- RAMPS 1.4 LCD 12864 intelligent controller.
- With an SD card base on back.
- Large screen display 128×64 LCD (3.2″)
- SD card slot at the back, able to directly select a file and print
- The product comes encoder parameter adjustment can be achieved, and the file selection print
- Plug & play on the RAMPS, but need to modify the firmware to support.
- LCD 12864 Smart Controller fully supported by Marlin Firmware.
- Large screen display 128×64 LCD (3.2″)
- SD card slot at the back, able to directly select a file and print
- The product comes encoder parameter adjustment can be achieved, and the file selection print
- Plug & play on the RAMPS, but need to modify the firmware to support.
- LCD 12864 Smart Controller fully supported by Marlin Firmware.
4 PIN 128*64 OLED 0.96” BLUE
- Super high brightness and high contrast
- Driver IC: SSD1306
- Input voltage: .3v to 6 v
- Ultra-wide viewing angle >160 degree
- Low power consumption with 0.04 W
- Support wide range of Voltage: 3.3V to 5V
- OLED self-lights, no backlight required
- Fully compatible with Arduino
- Communication via IIC, only two I/O ports
- Working temperature: -30 degree to 80 degree
- Dimension: 27*27*4.1mm
- Supported platform: Arduino, 51 series, MSP430, SCR chips
- No font is required, software takes the word MODULO
4 PIN 128*64 OLED 0.96” WHITE
- High resolution: 128*64
- Driver IC: SSD1306
- Input voltage: 3.3v to 6 v
- Ultra-wide viewing angle >160 degree
- Display color: white
- Super low power consumption
- Support a wide range of input
- Performs without the need for a backlight
- Compatible I/O level: 3.3v, 5v
- Fully compatible with Arduino
- Interface: I2C
- Working temperature: -30 degree to 70 degree
- Dimension: 9*9*9cm
- Size: 99gm
7” Touch Screen
- 800×480 high resolution.
- Viewable screen size: 155mm x 86mm
- 10 finger capacitive touch
- Supports Raspberry Pi, and the driver is provided (works with custom Raspbian directly).
- Supports BB Black, comes with related images like Angstrom.
- Supports Banana Pi / Banana Pro, which comes with related images like Ubuntu, Raspbian.
- Connects to the Raspberry Pi board using a ribbon cable connected to the DSI port.
- The Adapter board is used to power the display and convert the parallel signals from the display to the serial (DSI) port on the Raspberry Pi.
- Require the latest version of Raspbian OS to operate correctly
- Not only for mini-PCs, but it can also work as a computer monitor just like any other general HDMI screen (touch function is unavailable in this case).
- HDMI interface for displaying, USB interface for touch control.
- Back light control to lower power consumption.
- Screen Dimensions: 194mm x 110mm x 20mm
Reviews
There are no reviews yet.