I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
16*2 ORANGE (LCD DISPLAY MODULE)
₹350.00 Original price was: ₹350.00.₹250.00Current price is: ₹250.00. inc. GST
- Input voltage: 4.7V TO 5.3V
- Operating voltage: 5V
- Current consumption is 1mA without backlight
- Consist of 2 rows and each row can print 16 characters
- Can display alphabets and numbers, i.e. alphanumeric
- Viewing area: 99*24mm
- Character size: 5.2*9.55mm
- Each character build by5*8 pixels
- Works on both 8 bit and 4 bit
- Used in industrial applications such as audio, automotive control panels, medical devices, and home automation products, etc.
- Operating temperature:0 degree to 50 degree Celsius
- Storage temperature: -10 degrees to 50 degree Celsius
- 1/16 duty cycle
Displaying information is one of the crucial steps in electronic projects. So using LCDs has always been one of the most popular ways to display information. 16*2 LCD module is yellow with an orange backlight display module. These are brand new and high-quality displays with orange backlight. It ensures high contrast and a wide viewing angle. This display is larger than a normal LCD display. These are big character LCD display modules with black text on the Orange background. LCD modules are the most prominent as they are low cost and program friendly, hence these modules are commonly used in the embedded system.
16*2 LCD module consists of 16 columns and 2 rows, so it has 32 (16*2) characters in total. Each character has 40pixels (5*8) and thus for 32 characters there 1280 pixels (32*40). LCD modules are the most prominent as they are low cost and program friendly, hence these modules are commonly used in the embedded system. An interface IC HD44780 is attached to the backside of the LCD module to determine the position of the pixel. This IC gets commands and data from the microcontroller and processes it, thus display it on the screen. Using a resistor or PWM the color can be dimmed easily.
It is quite simple to work with these LCDs s and they have full compatibility with all microcontrollers and processor boards. This display module works on 5V and has a white backlight which can be on or off as per requirement. This module consists of a minimum of 6 I/O pins to interface this LCD screen. Moreover, it can work in both 4 bit and 8-bit MCU interfaces.

Related products
16*1 CHARACTER BLUE LCD DISPLAY FOR AURDINO/RASPBERRY PI/ROBOTICS
16*1 GREEN (LCD DISPLAY MODULE)
- Operating voltage: 5V
- Display format: 16 characters * 1 line
- Display mode: STN or FSTN
- Dot-matrix: 5*8 dots
- Character size: 3.07 * 6.56mm
- Character pitch: 77 * 6.56mm
- LCD driver IC: ST7066U
- 1/16 duty cycle
- Polarizer mode: Transmissive
- Each character build by 5*8 pixels
- Works on both 8-bit parallel interface
- Operating temperature: -20 degree to 70 degree Celsius
- Low Current consumption
- Alphanumeric display
- Dimension: 80*36*13.2mm
- Compact size and lightweight
16*2 GREEN (LCD DISPLAY MODULE)
- Input voltage: 4.7V TO 5.3V
- Operating voltage: 5V
- Current consumption: 1mA
- Input leakage current:1micro ampere
- HD44780 Equivalent LCD Controller/driver Built-In
- 4-bit or 8-bit MPU Interface
- Each character build by 5*8 pixels
- Consist of 2 rows with each row has 16 characters
- Operating temperature:0 degree to 50 degree Celsius
- Low Current consumption
- Green Backlight
- Works with almost any Microcontroller
- Alphanumeric display
- Compact size and lightweight
- Easy to interface
- Dimension: 69.5*14.5mm
3D printer 128×64 Smart LCD controller for ramps 1.4
- RAMPS 1.4 LCD 12864 intelligent controller.
- With an SD card base on back.
- Large screen display 128×64 LCD (3.2″)
- SD card slot at the back, able to directly select a file and print
- The product comes encoder parameter adjustment can be achieved, and the file selection print
- Plug & play on the RAMPS, but need to modify the firmware to support.
- LCD 12864 Smart Controller fully supported by Marlin Firmware.
- Large screen display 128×64 LCD (3.2″)
- SD card slot at the back, able to directly select a file and print
- The product comes encoder parameter adjustment can be achieved, and the file selection print
- Plug & play on the RAMPS, but need to modify the firmware to support.
- LCD 12864 Smart Controller fully supported by Marlin Firmware.
6 PIN 128*64 OLED 0.96” BLUE
- Resolution: 128*64
- Visual angle>160
- Input voltage:3.3V to 6V
- Compatible I/O level:3.3v, 5v
- Only need 2 I/O port to control
- Driver IC: SSD1306
- Module volume:27*27*4.1mm
- Working temperature: -30 degree to 70 degree
- Full compatible with Arduino
- Configured for SPI protocol and can be easily changed to IIC
7” Touch Screen
- 800×480 high resolution.
- Viewable screen size: 155mm x 86mm
- 10 finger capacitive touch
- Supports Raspberry Pi, and the driver is provided (works with custom Raspbian directly).
- Supports BB Black, comes with related images like Angstrom.
- Supports Banana Pi / Banana Pro, which comes with related images like Ubuntu, Raspbian.
- Connects to the Raspberry Pi board using a ribbon cable connected to the DSI port.
- The Adapter board is used to power the display and convert the parallel signals from the display to the serial (DSI) port on the Raspberry Pi.
- Require the latest version of Raspbian OS to operate correctly
- Not only for mini-PCs, but it can also work as a computer monitor just like any other general HDMI screen (touch function is unavailable in this case).
- HDMI interface for displaying, USB interface for touch control.
- Back light control to lower power consumption.
- Screen Dimensions: 194mm x 110mm x 20mm
I2C MODULE WITH 16*2 CHARACTER LCD
- Supply voltage: 5V
- Display mode: STN
- Display format: 16*2
- Input data: 4 bit or 8 bit (for LCD)
- I2C address: 0x20~0x27 (original address is 0x20,we can change it ourselves)
- Compatible with multiple communication logic levels: 2.8~5VDC
- Compatible for 16*2 LCD
- Serial I2C control of LCD display using PCF8574
- Allow data display via only 2 wires.
- Backlight and contrast adjustment by the potentiometer
- Supports 7 ASCII fonts, 5 graphic functions
- Supports 128 level backlight lightness adjustment.
- Support 64 level screen contrast adjustment
- Supports device address modification
- Dimension: 10*4*5cm
- Size: 150gm
Waveshare 10.1inch HDMI LCD (B) (with case) 1280×800 IPS
- IPS screen,1280×800 high resolution
- Capacitive touch control supports up to ten-points touch
- When works with Raspberry Pi, supports Raspbian, Ubuntu, single touch, and driver free
- When working as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver free
- Supports Banana Pi, Banana Pro, comes with Lubuntu, Raspbian images
- Supports BB Black, comes with Angstrom image
- HDMI interface for displaying, USB interface for touch control
- Supports 5-level backlight adjustment.
- Case Material: high-quality black Acrylic
- Comes with a back holder, 45degree tilt angle
- Dimensions: 18 x 10 x 9 cm
- Weight: 800gm

Reviews
There are no reviews yet.