I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-9%
33nf 2000V DC Polyester Capacitor
Original price was: ₹20.00.₹15.00Current price is: ₹15.00. inc. GST
CD4026 CMOS Decade Counter with Decoded 7-Segment Display Outputs
Original price was: ₹35.00.₹30.00Current price is: ₹30.00. inc. GST
1KOhm ¼ Watt Carbon Film Resistor
Original price was: ₹11.00.₹10.00Current price is: ₹10.00. inc. GST
MOQ :10 NOS
- 1KΩ
- ¼ Watt
- 5% tolerance
- RoHS Compliant / Lead free
Description
A carbon Film Resistor is a resistive element made out of a thin carbon film on a non-conducting material. Axial resistors of this sort are one of the most common. Tolerance, stability, and TCR are all strengths of carbon film resistors. Furthermore, owing to the low voltage coefficient, the resistors have low noise qualities and a good linearity function. As a result, metal film resistors are frequently recommended in circuits where tight tolerance, low-temperature coefficient, and low noise qualities are important. They may be used in a variety of ways, such as active filters or bridge circuits.
The 1 KOhm 1/4 Watt Carbon Film Resistor is a fixed resistor that employs carbon film to confine electrical current to a specific threshold. Resistors of this type are commonly used in electrical circuits. Carbon film resistors are commonly used in high-voltage and high-temperature applications. With a nominal temperature of 350°C, operating temperatures can go up to 15kV. High-voltage power supply, radar, x-rays, and lasers are all examples.
Carbon Fim Resistor is made by depositing a carbon film over a ceramic substrate that serves as an insulator. The carbon coating also blocks electrical current to a certain extent. The insulating ceramic, on the other hand, does not allow heat to pass through, allowing the carbon film resistor to survive high temperatures without being destroyed. Meanwhile, carbon film resistors with tolerance values ranging from 1 ohm to 1 megaohm have an honest tolerance value.
Reviews (0)
Shipping & Delivery
Related products
10 Segment Led Bargraph Light Display Red, Yellow, Green, Blue
- LED type: LED array bar
- Segments: 10
- LED Colour: Green
- Housing color: white
- Reverse voltage: 5V
- Forward Voltage - Typical: 1.85 V
- Forward Voltage - Maximum: 2.2 V
- DC forward current: 30mA
- Peak forward current: 175mA
- Power dissipation: 75mW
- Peak wavelength: 590nm
- Luminous Intensity Typical: 120 Mcd
- Operating temperature: -40°C to +85°C
- 10 Separately Controlled LED's
- High Brightness
- High-Intensity Green Output
- Ideal for Audio and Meter Displays
- Economically priced
- Easy to Mount
5-36v Switch Drive High-power MOSFET Trigger Module
- Operating Voltage: DC 5V - 36V;
- The trigger source: digital high-low (DC3.3V - 20V), can be connected microcontroller IO port, PLC interfaces, DC power, you can access the PWM signal, the signal frequency 0--20KHZ perfect support.
- Output capacity: DC 5V - 36V, at room temperature, continuous current 15A, power 400W! Lower auxiliary cooling conditions, the maximum current up to 30A.
- Applications: You can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps, solenoid valves, etc.. You can enter
- PWM, motor speed control, lamp brightness.
- Availability: unlimited switch
- Operating temperature: -40-85
- Dimension: 34mm x 17mm x 12mm
- The use of imported dual-MOS parallel active output, lower resistance, more current, strong power at room temperature, 15A, 400W, to meet the most use of the equipment
- Wide voltage, the perfect support for PWM
- Easily control high power devices
- Input PWM to achieve motor speed control, lamp brightness control
APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A
- Input Voltage Range: 6-28V DC
- Output voltage: 5.3V ± 0.1V
- Maximum output current: 3A
- Maximum current: 90A
- Maximum voltage: 30V
- Supports from 2 cell to 6 cell battery.
- 6P cable can be directly connected to APM/Pixhawk flight control
- Additional 4P rows of pin-free to wire/PIN to connect to another flight control
- Voltage and current measurement configured for 5V ADC.
- Switching regulator outputs 5.3V and 3A max.
- Dimensions: 25mm x 21mm x 9mm
- Weight: 17gm
GSM Antenna Dlenp 2dbi/3dbi Patch Antenna with SMA Male Connector
- GSM Antenna
- Gain: 2 to 3dbi
- Wire Length: 3 metre
- 3dbi Sticker Antenna
- GSM Antenna
- SMA Male Connector
- Frequency Range(MHz): 824-960/1710-1990Mhz
- Bandwidth (MHz): 136/280
- VSWR≤1.5
- Gain(dB): 2-3dbi
- Max Input power(W): 60W
- Input Impedance: 50 Ω
- Polarization Type: Vertical
- Cable Type: RG174
- Mounting Adhesive
- Net weight: 47g
TP5100 4.2v 8.4v Single Double Lithium Battery Charge Management Li-ion Battery Compatible 2A Charging Board
- Input voltage: 5-15V DC power supply.
- Charge status: full and unloaded blue lights, charging red.
- Double 8.4v / 4.2v lithium rechargeable single .
- Programmable charge current. 0. 1A-2A .
- Programmable steady precharge current 10% -100%.
- Wide operating voltage, maximum reach I8V.
- Red and green LED charge status indicator.
- Chip temperature protection, overcurrent protection, under voltage protection.
- Battery temperature protection, reverse battery shutdown, short circuit protection.
- Switching frequency 400Khz, usable inductance 20uH and more.
- PWR_ON Power battery for switching control.
Reviews
There are no reviews yet.