I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-40%
TDA7266 Dual Audio Channel 7W + 7W Amplifier Module
Original price was: ₹600.00.₹540.00Current price is: ₹540.00. inc. GST
5V-12V ZVS Induction Low Voltage Heating Power Supply Module Board + Coil
Original price was: ₹1,600.00.₹1,400.00Current price is: ₹1,400.00. inc. GST
3V To 5V 1A USB Charger Step Up Boost Module
Original price was: ₹250.00.₹150.00Current price is: ₹150.00. inc. GST
- Module properties: Non-isolated step-up module (BOOST).
- Input voltage: 2.5-6V.
- Output voltage: 4-12 V (Adjustable (need to replacing the resistance to adjustable), the default 5 v).
- Output current: 1000mA (Max).
- Efficiency: 92% (Max) (the higher the input voltage, the higher the efficiency).
- Switching frequency: 1MHz.
- Output ripple: 20mV (MAX).
- Operating temperature: Industrial (-40°c to +85°c).
- Voltage regulation: ±2.5%.
- Short circuit protection: None
- Input: IN + postive, IN – negative.
- Output: USB output.
- Dimension: 3 x 1.3 x 0.8cm.
Description
The DC to DC boost converter steps up the input voltage from 2.5-6V.to any high output voltage from 4-12 V at a continuous current of 1.A depending on the input-output voltage settings. Since it is a boost convertor the output voltage will be always higher than the input voltage. This USB charging DC-DC step-up power module booster is a low-cost module with over current and current limiting features. The boost converter with a constant frequency of 1Mhz uses the Taiwan production boost chip with high efficiency of up to 92%. This module features a built-in over-current protection chip, under-voltage protection into a state below 2.5V. Thereby offers better protection for the module and thus avoids excessive discharge.
This module offers fixed resistor adjustments, thus the output voltage adjusted up to 12V output. But to ensure that the output power is less than 5W. This 1A USB charger DC step-up module uses a standard USB interface, which supports all universal USB charging mobile phones, MP3, MP4, and other equipment, the perfect support for iPhone and another mobile phone. The device is able to use TDK multilayer ceramic capacitors as the main filter capacitor. Which avoids the output ripple can be as low as 20mV (5V1A output case). And also long term aging concerns and provides compact packaging. The module consists of an on-board LED which indicates the charging status when USB is charging.
This module is widely used In order to power your electronic devices when your device needs 5V power supply. Or when we are using a lithium battery, this module can be directly step-up to 5V. Also used in DIY a mobile power supply, which needs one battery with 5v output such as for your phone, MP3, MP4, PSP charger, very easy.
Reviews (0)
Shipping & Delivery
Related products
5V USB OUTPUT CONVERTOR 7V-24V TO 5V/3A, DC-DC STEP DOWN BUCK KIS3R33S MODULE
- Module nature: non isolated buck
- Input voltage: 7V-24V DC
- Output voltage: 5V DC
- Output current: 4A
- Conversion efficiency:96% (max)
- Switching frequency: 340KHz
- Output ripple:30mv (max)
- Load regulation: +/-0.5%
- Voltage regulation: +/-2.5%
- Operating temperature: -40 degree to +85 degree Celsius
- Rectification: nonsynchronous rectification
- Short circuit protection
- Dimensions:60*21*14mm
- Weight: 150gm
ADJUSTABLE POWER MODULE 12A 24V BUCK TURN 12V LED DRIVER WITH CURRENT CHARGING INDICATOR
- Input voltage: 7V to 32V
- Output voltage: 0.8V to28 V (continuously adjustable)
- Output current: 12A
- Constant current range: 0.2-12A
- Conversion efficiency: up to 95%
- Operating frequency: 300KHz
- No load current: 20 milli ampere(24V to 12V)
- Dynamic response speed: 5% 200us
- Operating temperature: -40 degree to +85 degree Celsius
- Load regulation: +/- 1% (constant pressure)
- Voltage regulation: +/-1%
- Output ripple: 20M bandwidth
- Power module: QS-2405CCBD
- Two led indicators, light red indicates charging and light green indicates fully charged
- Used in-car power supply, battery charging, low voltage systems etc.
- Short circuit protection
- Dimension: 65*47* 23.5mm
DP50V5A Constant Voltage current Step-down Programmable Power Supply Module
• Model: DP50V5A.
• Input voltage range: 6V to 55 V.
• Output voltage range: 0.00 to 50 V.
• Output current: 0.000-5.000A.
• Output power range: 00.00-250.0W.
• Open size: 71mm x 39mm.
• Output voltage resolution: 0.01V.
• Output current resolution: 0.001A.
• Output Voltage accuracy: ± (0.5% + 1 digits).
• Output Current accuracy: ± (0.5% + 2 digit).
• Dimension: 79 x 43 x 48mm
• Weight: 78g.
Hi-link HLK-5M03 100-240 VAC to 5 VDC/3W Power Supply Module
- Meet UL, CE requirements,
- Ultra-thin, ultra-small
- Rated input voltage 100-240 VAc
- Input voltage range 90-264 VAc
- Maximum input current: 0.2 A
- Input current surge: 10 A
- Maximum Input voltage: 270 VAc
- Enter slow start:50 mS
- Input Low Voltage Efficiency Vin=110VAc,Output full-load?69 %
- Input High Voltage Efficiency Vin=220VAc,output full-load?70 %
- Long-term reliability: MTBF 100000h
- Load rated output voltage: +5±0.1
- Full rated output voltage: 5±0.2 VDc
- Short-term maximum output current: 1000mA
- The maximum output current for a long time: 600mA
- Voltage Regulation ±0.2 %
- Load Regulation ±0.5 %
- Low ripple and low noise
- Output overload and short circuit protection
- High efficiency, high power density
- Product designed to meet the requirements of EMC and Safety Test
- Low power consumption, environmental protection, no-load loss <0.1W
LM 2576HV Buck Module
- Module Properties: non-isolated constant voltage module
- Rectification: non-synchronous rectification
- Input voltage: 4.5V-60V
- Output Voltage(Less than input): 1.3V-26V
- Continuous operating current: 1.2A (output total power within 20W)
- Output current: 3A maximum
- Conversion efficiency: 92% (maximum)
- Switching frequency: 52KHz
- Output ripple: 50mV (maximum) 20M-bandwidth
- Load regulation: ± 0.5%
- Voltage regulation: ± 2.5%
- Operating temperature: -40 ℃ to +85 ℃
- Size: 43 * 30 * 14 mm
Mini 360 STEP DOWN BUCK CONVERTER POWER MODULE
- MPS MP2307DN buck regulator IC
- Design Non-isolated buck
- Rectification: synchronous rectification
- Input voltage: 4.75V-23V
- Output voltage: 1.0V-17V
- Output current Peak: 3A, continuous 1.8A
- Conversion efficiency: 96%
- Switching frequency: 340KHz
- Built-in 160°C thermal shutdown
- Output ripple: 30mV (no load)
- Load regulation: ± 0.5%
- Voltage regulation: ± 2.5%
- Operating temperature: -40 ° C to + 85 ° C
- Dimensions: 17 * 11 * 3.8mm
QC3.0 QC2.0 USB DC-DC Buck Converter Step Down Module Fast Quick Charger Circuit Board
- Input voltage: 6V-32V.
- Output voltage: default 5V, automatically adjust between 3-12V after triggering fast charge.
- Output power: up to 24W (5V/3.4A, 9V/2.5A, 12V/2A, etc.).
- Output voltage cable compensation function.
- Conversion efficiency: 90%-97%.
- Support multiple fast-charging protocols.
- Input overvoltage and under-voltage protection.
- Input overcurrent protection.
- Output overcurrent, short circuit protection.
- Machine over temperature protection.
- Support fast charge agreement
- Support DCP protocol, BC1.2.
- Support Huawei Fast Charge Protocol FCP/SCP.
- Support Huawei Fast Charge Protocol AFC.
- Support Spreadtrum Fast Charge Protocol SFCP.
- Support QC2.0 and 3.0.
- Support MTK PE1.1/PE2.0
XL4015 5A STEP DOWN WITH HEAT SINK
- Module nature: non-isolated buck module ( BUCK )
- Input voltage: 4-38V
- Output voltage: 1.25-36V
- Output current: 0-5A, it is recommended to use within 4.5A
- 14 Digital I/O Pins
- Output power: It is recommended to use within 75W, please add a heat sink if it exceeds 50W
- Working temperature: -40 degree + 85 degrees
- Working frequency: 180KHz
- Conversion efficiency: up to 96% Load adjustment rate: S ( I ) ≤ 0.8%
- Voltage adjustment rate: S ( u ) ≤ 0.8%
- Power indicator
- Short circuit protection
- Over-temperature protection
- Dimension: 54mm * 23mm wide *18mm
Reviews
There are no reviews yet.