I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-17%
Smart 3pin DHT11 Digital Temperature And Relative Humidity Sensor Module + PCB
Original price was: ₹300.00.₹199.00Current price is: ₹199.00.
Sonar Range Finder -High Performance Ultrasonic Sensor Module
Original price was: ₹2,142.86.₹2,100.84Current price is: ₹2,100.84. inc. GST
50~100 DC12V W1209 Digital Thermostat Thermometer Temperature Control
Original price was: ₹300.00.₹250.00Current price is: ₹250.00.
- Supply Voltage: 12V
- Measuring Inputs: NTC10K
- Measurement Accuracy: 0.1 C
- Control Accuracy: 0.1 C
- Refresh Rate: 0.5 Seconds
- Cable Length: 0.5 Meter
- Output Type: 1 Channel Relay Output
- Capacity: 10A
- Temperature Control Range: -50 ~ 110 C
- Resolution at -9.9 to 99.9: 0.1 C
- Resolution at all other temperatures: 1 C
- Temperature: -10 ~ 60 C
- Humidity: 20-85%
- Dimensions:48mm x 40mm x 14mm
Description
XH-W1209 Mini thermostat Temperature controller is an affordable 12V Temperature controller with a 7-segment display and 3 switch keypad for setting temperature and other parameters. The module provides an NTC thermistor temperature sensing and has an accuracy of 0.1 C. This module is also known as an incubator sensor module. Because they are widely used in egg hatching applications and also to control temperature power in most types of electrical devices based on the temperature sensed by the NTC temperature sensor. The sensor can display the current temperature in degrees Centigrade via 3 digits seven-segment display and the current relay state by an on-board LED. This temperature controller can measure a temperature in the range of -50~+110 Degree Centigrade.
W1209 features an inbuilt embedded micro-controller that makes programming quite simple. Hence, the various parameters in the module configured using the three switches including ON and OFF trigger temperatures. Moreover, the W1209 Mini Thermostat Temperature Controller Switch operates at voltages up to a maximum of 240V AC at 5A or 14V DC at 10A to power on. Meanwhile, the onboard large and clear LED display offers better readability.
Parameter Setting (P0~P8):
- P0: Cooling / Heating mode
- P1: Â Backlash Setting
- P2: Highest Range Setting
- P3: Lowest Range Setting
- P4: Temperature Calibration
- P5: Delay Start Time
- P6: High-Temperature Alarm
- P7: Data Lock Switch
- P8: Restore Factory Settings
APPLICATIONS
- Domestic freezer
- Water tank
- Refrigerator
- Industrial chiller
- Boiler
Reviews (0)
Shipping & Delivery
Related products
100K ohm NTC 3950 Thermistor/Temperature Sensor for Reprap 3D printer Extruder
- High-temperature Teflon wire temperature: 200 degrees
- Nominal resistance R25 (25 ℃): 100k
- Resistance accuracy: ± 1%
- B value R25 / 50: 3950k
- B value accuracy: ± 1%
- Operating temperature range: -40 ℃ ~ +300 ℃
- Dissipation power factor: ≥ 5 mW / ℃ (static air)
- Thermal time constant: ≤ 7S (static air)
- Maximum rated power: 45mW
- Wiring length: 1 meter
- Material: glass glaze film
DHT22 MODULE
- Power supply: 3.3-5.5VDC
- Operating range: humidity 0-100%R
- Ultra-Low Power.
- No Additional Components.
- Long-Distance Signal Transmission.
- All Calibration, Digital Output & Completely Interchangeable.
- Relative Humidity & Temperature Measurement.
- Humidity Measurement Precision: 2-5% RH.
- Temperature Measurement Precision: 0.5 deg C.
- Calibrated digital signal
- Outstanding long-term stability
Digital LCD Indoor Temperature Humidity Meter Thermometer Hygrometer Gauge
- Material: Plastic
- Temperature range: -50 ° C to 70 ° C
- Measuring humidity range: 10% RH to 99% RH
- Humidity accuracy: 5%
- Moisture display resolution: 1% RH
- Accuracy of temperature: 1 ° C
- Operating voltage: 1.5 V or LR44 batteries (not included)
- Sampling period: 10 S
- Colour: Black
- Modern type indoor desk thermometer with hygrometer.
- One switchback of the thermometer that you can adust °C
- Ideal household decoration and ensure you the most desirable ambient temperature and humidity
- LCD dimension: approx. 40x22.5mm
- Dimension: approximately 48x28.5x15.2mm
DS18B20 PROBE
- Usable temperature range: -55 to 125°C (-67°F to +257°F)
- 9 to 12-bit selectable resolution
- Uses 1-Wire interface- requires only one digital pin for communication
- Unique 64 bit ID burned into a chip
- Multiple sensors can share one pin
- ±0.5°C Accuracy from -10°C to +85°C
- Temperature-limit alarm system
- Query time is less than 750ms
- Usable with 3.0V to 5.5V power/data
- Each pin uses a heat-shrinkable tube to prevent short circuit, internal sealing glue.
- Stainless steel tube encapsulation waterproof moistureproof prevents rust.
- Stainless steel tube 6mm diameter by 30mm long.
- Contains DS18B20 temperature sensor.
- Uses 1-Wire interface- requires only one digital pin for communication.
- Unique 64 bit ID burned into the chip.
- Multiple sensors can share one pin.
- Temperature-limit alarm system.
- Without the external components, the unique single bus.
GY-906 MLX90614ESF Contactless Temperature Sensor Module
- Small size, low cost
- Mounted on a breakout board with two types of pins
- 10k Pull up resistors for the I2C interface with optional solder jumpers
- Easy to integrate
- Factory calibrated in wide temperature range:
- Sensor temperature: -40...+125°C
- Object temperature: -70...+380°C
- High accuracy of 0.5°C over the wide temperature range
- (0...+50°C for both Ta and To) High (medical) accuracy calibration
- The measurement resolution of 0.02°C
- Single and dual-zone versions
- SMBus compatible digital interface
- Customizable PWM output for continuousreading
- Simple adaptation for 8...16V applications
- Sleep mode for reduced power consumption
MH1210W 72V 250V 10A Digital Temperature Controller
- Working voltage: DC 9-72V/AC90-250V ± 10%, 50/60 HZ
- Rated current: 10 A
- Power consumption: ≤3 W
- Measurement range: -50~110 °C
- Measurement precision: 0.1 °C
- Measurement error: ±0.3 °C
- A mini temperature controller.
- Large and clear LED display for better readability
- Wide temperature measuring range
- Heating and cooling control
- Temperature calibration
- Delay protection function
- All parameters reset to default settings after short circuit
Reviews
There are no reviews yet.