I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
5V 20Amp SMPS Power Supply
₹1,200.00 Original price was: ₹1,200.00.₹1,000.00Current price is: ₹1,000.00. inc. GST
- Input Voltage: AC 100 – 264V 50 / 60Hz
- Output Voltage: 5V DC, 20A
- Output voltage: Adjustment Eange: ±20%
- Protections: Overload / Over Voltage / Short Circuit
- Auto-Recovery After Protection
- Universal AC input / Full range
- 100% Full Load Burn-in Test
- Cooling by Free Air Convection
- High Quality and High Performance
- LED power supply with a metal body for hidden installation for LED lighting
- Design with Built-in EMI Filter, improve signal precision.
- Certifications: CE & RoHs
- No Minimum Load.
- Compact Size Light Weight.
- High Efficiency, Reliabiltiy & low energy consumption
- Category – Switch Mode Power Adaptor (SMPS)
- MTBF >50,000 hours
- Output Type – DC
- Output – 5Volts 20Amp
- Shell Material: Metal Case / Aluminum Base
- Color: Sliver
A switched-mode power supply (SMPS) is an electronic circuit that converts power utilizing switching devices that are turned on and off at high frequencies, as well as storage components like inductors or capacitors to provide power while the switching device is not conducting.
An SMPS, like other power supplies, converts the voltage and current characteristics while transferring power from a DC or AC source (typically mains power) to DC loads, such as a personal computer. Unlike a linear power supply, a switching-mode supply’s pass transistor alternates between low-dissipation, full-on and full-off states all the time, spending relatively little time in the high-dissipation transitions, reducing wasted energy.
This is a 100W DC metal power supply with a 5V 20A SMPS. It works well and produces only a small amount of heat. Its consistent voltage output assures power supply stability. Overvoltage, short circuit, and overload protection are all included in the switching power supply. The anti-interference mechanism ensures that LED bulbs last a long period. Changing the power supply

Related products
Dc 4.5V-40V to 5V 2A USB Charger DC-DC Step-Down Buck Converter Voltmeter
- Input voltage: DC 4.5 ~ 40V.
- Output voltage: 5V (when the input voltage is between 6.5V ~ 40V).
- Output current: 2A.
- The voltmeter has an automatic calibration function.
- With reverse connection protection.
- With overheat protection and short circuit protection.
- The voltmeter has an automatic calibration function.
- With reverse connection protection.
- With overheat protection and short circuit protection.
- High efficiency and low ripple.
- With USB power indicator light.
LM2596 3A STEP DOWN MODULE
- Module properties: non isolated constant voltage module
- Rectification : non synchronous rectification
- Input voltage: 4.5V-35V
- Output voltage: 1.3V-30V
- Output current: 3A maximum
- Conversion efficiency: 92%
- Switching frequency: 150KHz
- Output ripple: 50mV 20M bandwidth
- Load regulation: +/- 0.5%
- Voltage regulation:” +/-2.5%
- Operating temperature: -40 degree to 85 degree Celsius
- Dimension: 48*23*14mm
QC3.0 QC2.0 USB DC-DC Buck Converter Step Down Module Fast Quick Charger Circuit Board
- Input voltage: 6V-32V.
- Output voltage: default 5V, automatically adjust between 3-12V after triggering fast charge.
- Output power: up to 24W (5V/3.4A, 9V/2.5A, 12V/2A, etc.).
- Output voltage cable compensation function.
- Conversion efficiency: 90%-97%.
- Support multiple fast-charging protocols.
- Input overvoltage and under-voltage protection.
- Input overcurrent protection.
- Output overcurrent, short circuit protection.
- Machine over temperature protection.
- Support fast charge agreement
- Support DCP protocol, BC1.2.
- Support Huawei Fast Charge Protocol FCP/SCP.
- Support Huawei Fast Charge Protocol AFC.
- Support Spreadtrum Fast Charge Protocol SFCP.
- Support QC2.0 and 3.0.
- Support MTK PE1.1/PE2.0
XL4015 5A STEP DOWN WITH DISPLAY
- Module nature: non-isolated buck module ( BUCK )
- Input voltage: 4-38V
- Output voltage: 1.25-36V
- Output current: 0-5A, it is recommended to use within 4.5A
- 14 Digital I/O Pins
- Output power: It is recommended to use within 75W, please add a heat sink if it exceeds 50W
- Working temperature: -40 degree to + 85 degrees
- Working frequency: 180KHz
- Conversion efficiency: up to 96% Load adjustment rate: S ( I ) ≤ 0.8%
- Voltage adjustment rate: S ( u ) ≤ 0.8%
- LED to indicate power status
- Short circuit protection
- Over-temperature protection
- Dimension: 54mm * 23mm wide *18mm
XL4015 5A STEP DOWN MODULE
- Module nature: non-isolated buck module ( BUCK )
- Input voltage: 4-38V
- Output voltage: 1.25-36V
- Output current: 0-5A, it is recommended to use within 4.5A
- 14 Digital I/O Pins
- Output power: It is recommended to use within 75W, please add a heat sink if it exceeds 50W
- Working temperature: -40 ~ + 85 degrees
- Working frequency: 180KHz
- Conversion efficiency: up to 96% Load adjustment rate: S ( I ) ≤ 0.8%
- Voltage adjustment rate: S ( u ) ≤ 0.8%
- Power indicator: No
- Short circuit protection
- Over-temperature protection
- Dimension: 54mm * 23mm wide *18mm
XL4015 5A STEP DOWN WITH HEAT SINK
- Module nature: non-isolated buck module ( BUCK )
- Input voltage: 4-38V
- Output voltage: 1.25-36V
- Output current: 0-5A, it is recommended to use within 4.5A
- 14 Digital I/O Pins
- Output power: It is recommended to use within 75W, please add a heat sink if it exceeds 50W
- Working temperature: -40 degree + 85 degrees
- Working frequency: 180KHz
- Conversion efficiency: up to 96% Load adjustment rate: S ( I ) ≤ 0.8%
- Voltage adjustment rate: S ( u ) ≤ 0.8%
- Power indicator
- Short circuit protection
- Over-temperature protection
- Dimension: 54mm * 23mm wide *18mm
XL6009 4A DC to DC BOOST CONVERTER
- Module Properties: Non-isolated boost (BOOST)
- Rectification: Non-Synchronous Rectification
- Input Voltage Range: 3V ~ 32V
- Output Voltage Range: 5V ~ 35V
- Input Current: 4A (max), no-load 18mA
- Conversion efficiency: <94%
- Switching frequency: 400KHz
- Output Ripple: 50mV (the higher the voltage, the greater the current, the greater the ripple)
- Load Regulation: ± 0.5%
- Voltage Regulation: ± 0.5%
- Operating Temperature: -40degree ~ +85 degree
- Dimensions: 43mm * 21mm * 14mm
YHDC SCT013-000 100A SWITCHING TYPE CURRENT TRANSFORMER
- Non-invasive current transformer
- Input current: 100A
- Frequency: 50Hz-150KHz
- Core material: Ferrite
- External material: ABS
- Suitable for lighting equipment, current measurement, AC motors, air compressors, and protection
- Two forms of output current
- Dielectric strength 6000V AC/1min
- Mechanical strength: not less than 100 times during opening and closing
- UL94-V0 flame retardant property
- Non linearity +-3% (10%-120% rated input current)
- Output plug: 3.5mm
- Working temperature: -25 degree TO 70 degree Celsius
- Dimension: 60*30*20mm

Reviews
There are no reviews yet.