I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
5V 20Amp SMPS Power Supply
₹1,200.00 Original price was: ₹1,200.00.₹1,000.00Current price is: ₹1,000.00. inc. GST
- Input Voltage: AC 100 – 264V 50 / 60Hz
- Output Voltage: 5V DC, 20A
- Output voltage: Adjustment Eange: ±20%
- Protections: Overload / Over Voltage / Short Circuit
- Auto-Recovery After Protection
- Universal AC input / Full range
- 100% Full Load Burn-in Test
- Cooling by Free Air Convection
- High Quality and High Performance
- LED power supply with a metal body for hidden installation for LED lighting
- Design with Built-in EMI Filter, improve signal precision.
- Certifications: CE & RoHs
- No Minimum Load.
- Compact Size Light Weight.
- High Efficiency, Reliabiltiy & low energy consumption
- Category – Switch Mode Power Adaptor (SMPS)
- MTBF >50,000 hours
- Output Type – DC
- Output – 5Volts 20Amp
- Shell Material: Metal Case / Aluminum Base
- Color: Sliver
A switched-mode power supply (SMPS) is an electronic circuit that converts power utilizing switching devices that are turned on and off at high frequencies, as well as storage components like inductors or capacitors to provide power while the switching device is not conducting.
An SMPS, like other power supplies, converts the voltage and current characteristics while transferring power from a DC or AC source (typically mains power) to DC loads, such as a personal computer. Unlike a linear power supply, a switching-mode supply’s pass transistor alternates between low-dissipation, full-on and full-off states all the time, spending relatively little time in the high-dissipation transitions, reducing wasted energy.
This is a 100W DC metal power supply with a 5V 20A SMPS. It works well and produces only a small amount of heat. Its consistent voltage output assures power supply stability. Overvoltage, short circuit, and overload protection are all included in the switching power supply. The anti-interference mechanism ensures that LED bulbs last a long period. Changing the power supply

Related products
30W LM2587 Step-Up Voltage Module
- Input Voltage Range : 3.5V to 30V
- Output Voltage Range: 4V to 30V
- Input Maximum Current : 5A
- Power : 30W
- Efficiency : 92%
- Operating temperature: -40 ℃ – 85 ℃
- Load capacity: 80W (MAX)
- Mode of connection: Wiring terminals are free of soldering, IN is input, OUT is output.
- Suitable for 24V car or laptop power supply.
- Low ripples.
- High power.
- Module size: 37mm x 32mm x 15mm (L x W x H)
- Net weight: 31g
3V To 5V 1A USB Charger Step Up Boost Module
- Module properties: Non-isolated step-up module (BOOST).
- Input voltage: 2.5-6V.
- Output voltage: 4-12 V (Adjustable (need to replacing the resistance to adjustable), the default 5 v).
- Output current: 1000mA (Max).
- Efficiency: 92% (Max) (the higher the input voltage, the higher the efficiency).
- Switching frequency: 1MHz.
- Output ripple: 20mV (MAX).
- Operating temperature: Industrial (-40°c to +85°c).
- Voltage regulation: ±2.5%.
- Short circuit protection: None
- Input: IN + postive, IN - negative.
- Output: USB output.
- Dimension: 3 x 1.3 x 0.8cm.
ADJUSTABLE POWER MODULE 12A 24V BUCK TURN 12V LED DRIVER WITH CURRENT CHARGING INDICATOR
- Input voltage: 7V to 32V
- Output voltage: 0.8V to28 V (continuously adjustable)
- Output current: 12A
- Constant current range: 0.2-12A
- Conversion efficiency: up to 95%
- Operating frequency: 300KHz
- No load current: 20 milli ampere(24V to 12V)
- Dynamic response speed: 5% 200us
- Operating temperature: -40 degree to +85 degree Celsius
- Load regulation: +/- 1% (constant pressure)
- Voltage regulation: +/-1%
- Output ripple: 20M bandwidth
- Power module: QS-2405CCBD
- Two led indicators, light red indicates charging and light green indicates fully charged
- Used in-car power supply, battery charging, low voltage systems etc.
- Short circuit protection
- Dimension: 65*47* 23.5mm
DPS3003 Constant Voltage Current Step-down Programmable Power Supply Module
- Input voltage range: 6V to 40V
- Output voltage range: 0V to 32V
- Output current: 0 to 3.000A.
- Output power range: 0-96W.
- Open size: 71mm*39mm.
- Output voltage resolution: 0.01V.
- Output current resolution: 0.001A.
- Output Voltage accuracy: ± (0.5% + 1 digits)
- Output Current accuracy: ± (0.5% + 2 digit)
- Dimension: 79*43*41mm
- Weight: about 90g.
LM 2576HV Buck Module
- Module Properties: non-isolated constant voltage module
- Rectification: non-synchronous rectification
- Input voltage: 4.5V-60V
- Output Voltage(Less than input): 1.3V-26V
- Continuous operating current: 1.2A (output total power within 20W)
- Output current: 3A maximum
- Conversion efficiency: 92% (maximum)
- Switching frequency: 52KHz
- Output ripple: 50mV (maximum) 20M-bandwidth
- Load regulation: ± 0.5%
- Voltage regulation: ± 2.5%
- Operating temperature: -40 ℃ to +85 ℃
- Size: 43 * 30 * 14 mm
LM2596 3A STEP DOWN MODULE
- Module properties: non isolated constant voltage module
- Rectification : non synchronous rectification
- Input voltage: 4.5V-35V
- Output voltage: 1.3V-30V
- Output current: 3A maximum
- Conversion efficiency: 92%
- Switching frequency: 150KHz
- Output ripple: 50mV 20M bandwidth
- Load regulation: +/- 0.5%
- Voltage regulation:” +/-2.5%
- Operating temperature: -40 degree to 85 degree Celsius
- Dimension: 48*23*14mm
QC3.0 QC2.0 USB DC-DC Buck Converter Charging Step Down Module Fast Quick Charger Circuit Board
- Input voltage: 6V-32V.
- Output voltage: default 5V, automatically adjust between 3-12V after triggering fast charge.
- Output power: up to 24W (5V/3.4A, 9V/2.5A, 12V/2A, etc.).
- Output voltage cable compensation function.
- Conversion efficiency: 90%-97%.
- Support multiple fast-charging protocols.
- Input overvoltage and under-voltage protection.
- Input overcurrent protection.
- Output overcurrent, short circuit protection.
- Machine over temperature protection.
- Support fast charge agreement
- Support DCP protocol, BC1.2.
- Support Huawei Fast Charge Protocol FCP/SCP.
- Support Huawei Fast Charge Protocol AFC.
- Support Spreadtrum Fast Charge Protocol SFCP.
- Support QC2.0 and 3.0.
- Support MTK PE1.1/PE2.0
YHDC SCT013-000 100A SWITCHING TYPE CURRENT TRANSFORMER
- Non-invasive current transformer
- Input current: 100A
- Frequency: 50Hz-150KHz
- Core material: Ferrite
- External material: ABS
- Suitable for lighting equipment, current measurement, AC motors, air compressors, and protection
- Two forms of output current
- Dielectric strength 6000V AC/1min
- Mechanical strength: not less than 100 times during opening and closing
- UL94-V0 flame retardant property
- Non linearity +-3% (10%-120% rated input current)
- Output plug: 3.5mm
- Working temperature: -25 degree TO 70 degree Celsius
- Dimension: 60*30*20mm

Reviews
There are no reviews yet.