6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle

This 6-30V 1-Channel Delay Power Relay Module designed with On-board Adjustable Timing Cycle Switches with Digital LED display. This relay module offers a wide range of application in Home Automation Delay Timer Control Switch Module Timer Controller. The Module operates at voltage range of 6-30V, also it supports micro USB 5.0V power supply.  This module is capable of output control of the device within DC 30V 5A or AC 220V 5A. It can be applied to many fields as there is a wide range of application.

Operation Mode:

P1: Trigger the signal, wait for the relay to “OP,” and then disconnect; Proceed as follows during the “OP” time.

P1.1: the signal was triggered again, but this time it was invalid.

P1.2: the signal was re-clocked when it was triggered again.

P1.3: The signal was triggered again, the relay was disconnected, and the clock was stopped.

P-2: Trigger signal, which occurs after the “CL” period has expired and the “OP” time has begun. When the time was finished, the replay was turned off.

P3.1: Trigger signal, then cycle the aforementioned activities once the “OP” time is on and the “CL” time is off. If a trigger signal is received within the loop, the relay is turned off, and the clock is stopped. It is possible to set the number of cycles (“LOP”).

P3.2: No need to trigger the signal after powering up, the “OP” time is on, the “CL” time is off, then cycle the above actions; The number of cycles ( “LOP “) can be set.

P-4: Signal holding function (P-4) If the signal is triggered, timing is cleared, and the relay is turned on; if the signal is not triggered, timing is cleared, and the relay is turned off after the “OP” time is up; if another signal is triggered during timing, timing is cleared.

How to choose the timing range:

After setting the parameter value in the mode selection interface, press the STOP button to select the timing range.

• The decimal point is in one place, the time range is: 1 second ~ 999 seconds
• X decimal point in ten, timing range: 0.1 seconds to 99.9 seconds
• XXX decimal point fully illuminated, timing range: 1 minute ~ 999 minute