I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Motor for Micro FPV RC Quadcopter
₹200.00 Original price was: ₹200.00.₹150.00Current price is: ₹150.00. inc. GST
- Motor Diameter: 8.5mm
- Motor Length: 20mm
- Shaft Diameter: 1.0mm
- Cable Length: 60mm
- Weight: about 5g
- Operating Voltage range: 3v to 3.7v DC
- Rated Speed – 39000 RPM
- Propeller length: 75mm
- This coreless motor supports 1S battery.
- Ideal for mini quadcopter projects weighing below 60 grams
Propeller is designed as a lightweight brushed DC coreless motor. These coreless motor works perfectly for a small drone, offering you an excellent affordable price when compared with costly BLDC motors. This Magnetic Micro Coreless Motor for Micro FPV RC Quadcopter is a very compact and lightweight DC motor nicely crafted for perfectly matching your small 100mm multirotor frames. This coreless motor comes with high-quality magnets and supports a 1s battery.
This is much more required to lift and push the drone to the target. And these are less noisy with low resistance. The only disadvantage of using coreless is the amount of torque they provide, as they are High Speed and Low Torque motors.
Propellers are designed as high-quality propellers explicitly for Micro FPV RC Quadcopter. These Props are lightweight and of high strength providing an angle of 15° design at the end of the propeller. These propellers are widely used for lower RPM motor and slow-flying drone models. The wide and thin blades of the propeller in their size category make them highly flexible in crash conditions. Thus they do not break easily. Propellers Black especially draws a larger amount of currents. And as a result, gives a considerable amount of thrust for the quadcopters.

Related products
FlySky 2.4Ghz 6CH Receiver
- Item Name: FS-R6B Receiver
- Brand Name: Flysky
- Power input: 4.0 -6.5 V DC
- RF power: less than 20DBm
- Modulation: GFSK
- Code type: PCM
- Sensitivity: 1024
- PWM channels: 6
- Protocol: AFHDS
- Distance: >150m
- Antenna type: Built-in antenna
- Low voltage warning: LED
- Charger port
- Certificate: CE,FCC,RoHS
- Dimension: 30*25*8mm
- Weight: 25g
Flysky FS-i6 6 Channel
- Bandwidth (kHz): 500.
- RF Range (GHz): 2.40 ~ 2.48.
- No. of channels: 6.
- Remote controller weight (gm): 400.
- Power: 6V (1.5V AA*4).
- Antenna Length: 26mm * 2 (dual antenna).
- Transmitting Power: ≤ 20dBm.
- RF Receiver Sensitivity: -105dbm.
- Entry-level 6 channel 2.4GHz radio with telemetry capability.
- Easy to use Programming & Navigation Buttons.
- Supports Heli/Standard Wing/Elevon/V-Tail.
- 20 Model Memory.
- 8 Character Model Name.
- Trainer and charging ports.
- The backlight LCD screen displays real-time transmitter and receiver voltage.
- 4 Stick Mode Selectable.
KK-Mini FLIGHT CONTROLLER
- IC: Atmega644 PA
- Gyro/Accelerometer: Auto-level: Yes
- Input Voltage: 4.8-6.0V
- AVR interface: standard 6 pins.
- The signal from Receiver: 1520us (5 channels)
- Signal to ESC: 1520us
- LCD size: 24*18mm
- Mini buttons size: Four 3.3*4.2mm
- Mounting holes: 30.5x30.5mm
- Voltage sensor: One red positive pin header for.
- Input rail: Single row 2.54mm pitch pin header for input signal
- Firmware Version: 1.6
- Dimension: 36x36x11.5mm
Landing Gear
MARSPOWER MX1806 2280KV BLDC Motor
- VK: 2280
- Max thrust: 460g
- No of cells: 2-3S
- Framework: 12N14P
- Suitable Propeller: 5-6”
- Shaft: 2mm
- Minimum ESC Specification: 12A Suggested
- Durable with high quality
- The 0.2mm core to lower load temperature and increase efficiency
- Range of use for DJI F330 ZMR250 H250
- Do every single motor balancing test
- Japan NMB bearings provide low noise and long life
- 2mm spindle selection of Kawasaki, Japan, more efficient, less heat
- NdFeB magnets temperature selection
- MX1806 (positive thread motor)
- FPV all configurations life 7-8 minutes!
- Easy to loosen the nut bombing risk!
- Low centre of gravity design
- Long-endurance design
- Dimension: 26.7*23mm
- Weight: 18gm
Power Distribution Board
- Material: glass fiber
- Easy connections from the battery to your ESC, video Transmitter, Flight Controller,
- LED power indicators
- Switches to control LEDs, video Transmitter power, etc.
- Can connect 1-8 ESC.
- Onboard switching voltage regulator
- Hole Spacing: 45mm Square and 35mm Square (Compatible with KK 45mm spacing)
- Dimensions : 50 x 50 x 2 mm.
- Weight: 8 gm.
Smart Robot Car Chassis Kit 2 Wheels
- This car is the tachometer encoder.
- Works with a 4 AA battery box (batteries not included).
- Used for distance measurement, velocity.
- Can use with other devices to realize the function of tracing, obstacle avoidance, distance testing, speed testing,
- Wireless remote control.
- Laser Cut Acrylic Chassis
- Two Dual Shaft Motors For Either Side
- Universal Castor To Avoid Slippage
- Placeholders For Different Sensors, Servos, and Modules
- Has Strong Torsion, With 130 Strong Magnetic Dc Motor. Speed Ratio 1: 48
- Size: 21 x 15 cm (L x W).
- Wheel size: 6.5 x 2.7cm (Diameter x Height).

Reviews
There are no reviews yet.