I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
CD4502BE CMOS Strobed Hex Inverter Buffer IC
₹32.00 Original price was: ₹32.00.₹25.00Current price is: ₹25.00. inc. GST
- CMOS Strobed Hex Inverter/Buffer
- Number of Input Lines:Â 6
- Number of Output Lines:Â 6
- Polarity:Â Inverting
- High Level Output Current:Â -4.2 mA
- Logic Family:Â CD4000
- Low Level Output Current:Â 25.2 mA
- Maximum Power Dissipation:Â 100 mW
- Number of Channels per Chip:Â 5
- Output Type:Â 3-State
- Propagation Delay Time:Â 380 ns at 5 V, 180 ns at 10 V, 130 ns at 15 V
- Operating Temperature Range: -55°C to +125°C
- Supply Voltage Range:Â 3V to 18V
- Package:Â PDIP-16
CD4502BE designed as a Strobed Hex Inverter (NOT gate) IC-based on monolithic complementary MOS (CMOS) technology. This IC come with six Inverter buffer inside it and provide 3 state output. This Converter IC widely used in buffer circuits and wave generator circuits.CD4049 ideal for use in high voltage applications as it offers a wide range of operating voltage from 3V to 18V. As it functions as an inverter IC and an inverter convert the logic level HIGH to LOW and LOW to HIGH. The IC also provides buffered outputs which improve transfer characteristics by providing very high gain. The CD4502BE IC manufactured in 16 – pin hermetically sealed dual in line package (DIP)ceramic (D) packages.Â
A Logic 1 in the OUTPUT DISABLE input produces a high impedance state in all six outputs. This feature allows the common busing of output thus simplifying system design. A logic 1 in the input INHIBIT switches the all 6 output to logic 0 if the output disables input 1 logic 0. Moreover, this inverter IC capable of driving 2 standard TTL load. Which is equivalent to a 6-time JDEC B series IL standard.
APPLICATION
- 3 State Hex Inverter for interfacing IC with data bus
- COS/MOSÂ to TTL hex buffer

Related products
650NM Laser Diode
- Wavelength: 650nm
- Output optical power: 5mW
- Operating voltage: 5V
- Operating current: ~30mA
- Input current: 30mA
- Housing material: Copper
- Power lead length: 120mm.
- Transmit power: 58mW
- Spot: size 10mm to 15mm at 15meters
- Life span more than 2000 hours
- Driver circuit: APC circuit
- Small size
- Cost-effective
- Breadboard friendly
- Operating temperature -10°C to 40°C
- Dimension: :15mm x 6mm
- Weight: 10 grams
74LS540 High-Speed CMOS Logic Octal Buffer and Line Driver IC
APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A
- Input Voltage Range: 6-28V DC
- Output voltage: 5.3V ± 0.1V
- Maximum output current: 3A
- Maximum current: 90A
- Maximum voltage: 30V
- Supports from 2 cell to 6 cell battery.
- 6P cable can be directly connected to APM/Pixhawk flight control
- Additional 4P rows of pin-free to wire/PIN to connect to another flight control
- Voltage and current measurement configured for 5V ADC.
- Switching regulator outputs 5.3V and 3A max.
- Dimensions: 25mm x 21mm x 9mm
- Weight: 17gm
Dean Connector
- Male plug size: About 13* 7* 19mm
- Female plug size: About 13* 7* 15mm
- Current Rating: 30Amps
- Colour: Red and golden
- Material: Plastic and metal
- Provides a secure connection for battery and motor connections
- Eliminates the possibility of wrong polarity connections
- Used in RC hobby, car, boat, plane, helicopter, LIPO battery, etc.
- Dimension: 9x0.7x2cm
- Weight:20gm
HX711–24 Bit Analog to Digital Converter (ADC)
- It is an ADC converter with two differential input channels
- An active-low noise PGA is integrated inside the chip which provides the gain of 32, 64 and 128
- It has a power-on-reset capability which simplifies digital interface initialization.
- All controls to the IC are made through the pins. Programming is not needed.
- You can select a data rate of 10SPS or 80SPS at the output.
- Provides simultaneous supply rejection of 50Hz and 60Hz supply.
- Built-in analog power supply regulator
- The voltage supply range is from 2.6V to 5.5V
- The temperature range is from -40 °C to +85℃
IR LED Sensor
- Size: 5mm LED
- Wavelength: 940nm wavelength (most commonly used)
- Forward current (IF) is 100mA (normal condition) and 300mA (max.)
- 5A of surge forward current
- 24v to 1.4v of forward voltage
- Temperature : -40 to 100 ℃
- Soldering Temperature should not exceed 260 ℃
- Power Dissipation of 150mW at 25℃ (free-air temperature) or below
- Spectral bandwidth of 45nm
- Viewing angle: 30 to 40 degree
- High Reliability
- Excessive radiant intensity
- Having lead spacing of 2.54mm
- Easy to use with breadboard or perf board
SIM Card Holder
Solid State Relay SSR-40DD 40A 3-32V DC to 5-60V DC SSR 40DD Relay Solid State
- Model: SSR-40 DD.
- Control mode: DC-DC
- Input voltage: 3-32V DC.
- Output voltage: 5-60V DC.
- Output current: 40A.
- On voltage: ≤1v.
- One-off time: ≤10ms.
- Off leakage current: ≤2ma.
- Loading current: 40A
- Control current: 3-25mA DC
- Material: plastic + metal.
- Environment temperature: -30 to +75
- Long service life and high reliability.
- Reduced electromagnetic interference.
- Highly reliable, compact size designed to offer users maximum simplicity.
- Weight: 0. 106Kg.

Reviews
There are no reviews yet.