I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
CD4502BE CMOS Strobed Hex Inverter Buffer IC
₹32.00 Original price was: ₹32.00.₹25.00Current price is: ₹25.00. inc. GST
- CMOS Strobed Hex Inverter/Buffer
- Number of Input Lines:Â 6
- Number of Output Lines:Â 6
- Polarity:Â Inverting
- High Level Output Current:Â -4.2 mA
- Logic Family:Â CD4000
- Low Level Output Current:Â 25.2 mA
- Maximum Power Dissipation:Â 100 mW
- Number of Channels per Chip:Â 5
- Output Type:Â 3-State
- Propagation Delay Time:Â 380 ns at 5 V, 180 ns at 10 V, 130 ns at 15 V
- Operating Temperature Range: -55°C to +125°C
- Supply Voltage Range:Â 3V to 18V
- Package:Â PDIP-16
CD4502BE designed as a Strobed Hex Inverter (NOT gate) IC-based on monolithic complementary MOS (CMOS) technology. This IC come with six Inverter buffer inside it and provide 3 state output. This Converter IC widely used in buffer circuits and wave generator circuits.CD4049 ideal for use in high voltage applications as it offers a wide range of operating voltage from 3V to 18V. As it functions as an inverter IC and an inverter convert the logic level HIGH to LOW and LOW to HIGH. The IC also provides buffered outputs which improve transfer characteristics by providing very high gain. The CD4502BE IC manufactured in 16 – pin hermetically sealed dual in line package (DIP)ceramic (D) packages.Â
A Logic 1 in the OUTPUT DISABLE input produces a high impedance state in all six outputs. This feature allows the common busing of output thus simplifying system design. A logic 1 in the input INHIBIT switches the all 6 output to logic 0 if the output disables input 1 logic 0. Moreover, this inverter IC capable of driving 2 standard TTL load. Which is equivalent to a 6-time JDEC B series IL standard.
APPLICATION
- 3 State Hex Inverter for interfacing IC with data bus
- COS/MOSÂ to TTL hex buffer

Related products
10 Segment Led Bargraph Light Display Red, Yellow, Green, Blue
- LED type: LED array bar
- Segments: 10
- LED Colour: Green
- Housing color: white
- Reverse voltage: 5V
- Forward Voltage - Typical: 1.85 V
- Forward Voltage - Maximum: 2.2 V
- DC forward current: 30mA
- Peak forward current: 175mA
- Power dissipation: 75mW
- Peak wavelength: 590nm
- Luminous Intensity Typical: 120 Mcd
- Operating temperature: -40°C to +85°C
- 10 Separately Controlled LED's
- High Brightness
- High-Intensity Green Output
- Ideal for Audio and Meter Displays
- Economically priced
- Easy to Mount
120pcs 12 values 0.22UF-470UF Aluminum electrolytic capacitor assortment kit set pack
650NM Laser Diode
- Wavelength: 650nm
- Output optical power: 5mW
- Operating voltage: 5V
- Operating current: ~30mA
- Input current: 30mA
- Housing material: Copper
- Power lead length: 120mm.
- Transmit power: 58mW
- Spot: size 10mm to 15mm at 15meters
- Life span more than 2000 hours
- Driver circuit: APC circuit
- Small size
- Cost-effective
- Breadboard friendly
- Operating temperature -10°C to 40°C
- Dimension: :15mm x 6mm
- Weight: 10 grams
Capacitor Touch Dimmer, Constant Voltage LED Stepless Dimming, PWM Control Board
- Voltage range: 4V to 5V
- Maximum output current: 500mA
- Hole distance: 16 mm
- Aperture: 5 mm
- The lamp brightness can be adjusted by requirement, it is very to operate.
- It can touch in medium protection, such as glass, acrylic, plastic, ceramics, and so on, which is very safe.
- Anti power and phone interference, the EFT can reach above +/-2KV; the touch response sensitivity and reliability will not be affected by the close distance or multi-angle mobile phone interference.
- Dimming mode: Non-polar PWM dimming.
- PCB size: 23 x 20mm
DC 50A 75mV Current Shunt Resistor for Amp Meter Gauge
HX711–24 Bit Analog to Digital Converter (ADC)
- It is an ADC converter with two differential input channels
- An active-low noise PGA is integrated inside the chip which provides the gain of 32, 64 and 128
- It has a power-on-reset capability which simplifies digital interface initialization.
- All controls to the IC are made through the pins. Programming is not needed.
- You can select a data rate of 10SPS or 80SPS at the output.
- Provides simultaneous supply rejection of 50Hz and 60Hz supply.
- Built-in analog power supply regulator
- The voltage supply range is from 2.6V to 5.5V
- The temperature range is from -40 °C to +85℃
IR LED Sensor
- Size: 5mm LED
- Wavelength: 940nm wavelength (most commonly used)
- Forward current (IF) is 100mA (normal condition) and 300mA (max.)
- 5A of surge forward current
- 24v to 1.4v of forward voltage
- Temperature : -40 to 100 ℃
- Soldering Temperature should not exceed 260 ℃
- Power Dissipation of 150mW at 25℃ (free-air temperature) or below
- Spectral bandwidth of 45nm
- Viewing angle: 30 to 40 degree
- High Reliability
- Excessive radiant intensity
- Having lead spacing of 2.54mm
- Easy to use with breadboard or perf board

Reviews
There are no reviews yet.