I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
CD4502BE CMOS Strobed Hex Inverter Buffer IC
₹32.00 Original price was: ₹32.00.₹25.00Current price is: ₹25.00. inc. GST
- CMOS Strobed Hex Inverter/Buffer
- Number of Input Lines:Â 6
- Number of Output Lines:Â 6
- Polarity:Â Inverting
- High Level Output Current:Â -4.2 mA
- Logic Family:Â CD4000
- Low Level Output Current:Â 25.2 mA
- Maximum Power Dissipation:Â 100 mW
- Number of Channels per Chip:Â 5
- Output Type:Â 3-State
- Propagation Delay Time:Â 380 ns at 5 V, 180 ns at 10 V, 130 ns at 15 V
- Operating Temperature Range: -55°C to +125°C
- Supply Voltage Range:Â 3V to 18V
- Package:Â PDIP-16
CD4502BE designed as a Strobed Hex Inverter (NOT gate) IC-based on monolithic complementary MOS (CMOS) technology. This IC come with six Inverter buffer inside it and provide 3 state output. This Converter IC widely used in buffer circuits and wave generator circuits.CD4049 ideal for use in high voltage applications as it offers a wide range of operating voltage from 3V to 18V. As it functions as an inverter IC and an inverter convert the logic level HIGH to LOW and LOW to HIGH. The IC also provides buffered outputs which improve transfer characteristics by providing very high gain. The CD4502BE IC manufactured in 16 – pin hermetically sealed dual in line package (DIP)ceramic (D) packages.Â
A Logic 1 in the OUTPUT DISABLE input produces a high impedance state in all six outputs. This feature allows the common busing of output thus simplifying system design. A logic 1 in the input INHIBIT switches the all 6 output to logic 0 if the output disables input 1 logic 0. Moreover, this inverter IC capable of driving 2 standard TTL load. Which is equivalent to a 6-time JDEC B series IL standard.
APPLICATION
- 3 State Hex Inverter for interfacing IC with data bus
- COS/MOSÂ to TTL hex buffer

Related products
120pcs 12 value 1uF-470uF Electrolytic Capacitor Kit 1UF 2.2UF 3.3UF 4.7UF 10UF 22UF 33UF 47UF 100UF 220UF
74LS540 High-Speed CMOS Logic Octal Buffer and Line Driver IC
APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A
- Input Voltage Range: 6-28V DC
- Output voltage: 5.3V ± 0.1V
- Maximum output current: 3A
- Maximum current: 90A
- Maximum voltage: 30V
- Supports from 2 cell to 6 cell battery.
- 6P cable can be directly connected to APM/Pixhawk flight control
- Additional 4P rows of pin-free to wire/PIN to connect to another flight control
- Voltage and current measurement configured for 5V ADC.
- Switching regulator outputs 5.3V and 3A max.
- Dimensions: 25mm x 21mm x 9mm
- Weight: 17gm
Capacitor Touch Dimmer, Constant Voltage LED Stepless Dimming, PWM Control Board
- Voltage range: 4V to 5V
- Maximum output current: 500mA
- Hole distance: 16 mm
- Aperture: 5 mm
- The lamp brightness can be adjusted by requirement, it is very to operate.
- It can touch in medium protection, such as glass, acrylic, plastic, ceramics, and so on, which is very safe.
- Anti power and phone interference, the EFT can reach above +/-2KV; the touch response sensitivity and reliability will not be affected by the close distance or multi-angle mobile phone interference.
- Dimming mode: Non-polar PWM dimming.
- PCB size: 23 x 20mm
DC 50A 75mV Current Shunt Resistor for Amp Meter Gauge
GSM Antenna Dlenp 2dbi/3dbi Patch Antenna with SMA Male Connector
- GSM Antenna
- Gain: 2 to 3dbi
- Wire Length: 3 metre
- 3dbi Sticker Antenna
- GSM Antenna
- SMA Male Connector
- Frequency Range(MHz): 824-960/1710-1990Mhz
- Bandwidth (MHz): 136/280
- VSWR≤1.5
- Gain(dB): 2-3dbi
- Max Input power(W): 60W
- Input Impedance: 50 Ω
- Polarization Type: Vertical
- Cable Type: RG174
- Mounting Adhesive
- Net weight: 47g
IR LED Sensor
- Size: 5mm LED
- Wavelength: 940nm wavelength (most commonly used)
- Forward current (IF) is 100mA (normal condition) and 300mA (max.)
- 5A of surge forward current
- 24v to 1.4v of forward voltage
- Temperature : -40 to 100 ℃
- Soldering Temperature should not exceed 260 ℃
- Power Dissipation of 150mW at 25℃ (free-air temperature) or below
- Spectral bandwidth of 45nm
- Viewing angle: 30 to 40 degree
- High Reliability
- Excessive radiant intensity
- Having lead spacing of 2.54mm
- Easy to use with breadboard or perf board
Solid State Relay Module DC To AC SSR-40DA 3-32VDC/24-380VAC 40A
- Control mode: DC-AC
- Input voltage: 3-32V DC.
- Output voltage: 24-380V AC.
- Output current: 40A.
- Working voltage: 250V.
- Material: plastic + metal.
- Loading current: 40A
- Control current: 3-25mA DC
- On voltage: ≤1.5V AC
- One-off Time: ≤10ms
- Off Leakage Current: ≤2mA
- Dielectrics voltage-resistance: 2500VAC
- Environment temperature: -30 to +75
- Long service life and high reliability.
- Reduced electromagnetic interference.
- Highly reliable, compact size designed to offer users maximum simplicity.

Reviews
There are no reviews yet.