I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-19%
40A DC MOTOR SPEED REGULATOR PWM CONTROLLER 2000W
Original price was: ₹850.00.₹650.00Current price is: ₹650.00. inc. GST
16*2 GREEN (LCD DISPLAY MODULE)
Original price was: ₹200.00.₹160.00Current price is: ₹160.00. inc. GST
DC-DC BOOST CONVERTER STEP UP I/P: 10V – 32V O/P: 12V -35V/6A
Original price was: ₹800.00.₹650.00Current price is: ₹650.00. inc. GST
- Input voltage: 10V-32V DC
- Output voltage: 12V-35V DC
- Output Current: 6A
- Output ripple: 2% MAX
- Output power: 150 W
- Working temperature: -40 degree to 85 degree
- No load current:25mA
- Voltage regulation:+-0.5%
- Load regulation:+-0.5%
- Dynamic response speed: 200uS 5%
- The non-isolated step-up power conversion module
- Onboard LED illuminates when the voltage is applied to the module
- Equips Multi-turn Potentiometer.
- Easy to drive 65W 90W dual-core notebook.
- The output voltage is continuously adjustable on OUT+ and OUT- screw terminals
- Dimension:2 .60*1.85*1.1inch
Description
The DC to DC boost converter step-up the input voltage from 10V to 32V to any output voltage from 12V to 35 V. This convertor provides an output power of 150W and output current of 6A. In this module, the output voltage should be always greater than the input voltage. This converter is commonly used for automotive 12V applications, where the standard input voltage of 12V is boosted to 19V for laptop power supply. And 18Vto 24V for other high voltage applications. Since there is no reverse polarity option, a series connection of diodes is recommended to protect the module. The output voltage can be continuously adjustable on OUT+ and OUT- screw terminals. A boost convertor or a step-up converter is a device that step-up the voltage from its input to its output, by stepping down the current.
This DC-DC step-up power module booster is a low-cost module with over current and current limiting features. A built-in efficient MOSFET switches enable to achieve an efficiency of up to 95%. This offers better results and a low ripple factor. This DC-DC Module was designed based on a high-performance step-up switching current (BOOST) module. The Onboard LED in the power module illuminates when the voltage is applied to the module. And the onboard potentiometer helps to adjust the voltage level.
Pin Description:
- IN+: Positive input (Unregulated or Regulated)
- IN-: Negative input (Ground)
- OUT+: Positive Output (Regulated)
- OUT-: Negative Output (Ground)
Reviews (0)
Shipping & Delivery
Related products
3 Wires 0.28 inch Digital Voltmeter DC 0-100V Red Light LED Panel Voltage Meter
- Display ON Voltage: 3 V
- Measurable Voltage Range: 0 to 100V
- Current Consumption: 10 mA
- Refresh Speed: 200ms (one time)
- Minimum Input: 3 V
- Highest Input: 30 V
- Accuracy: 0.1 V
- Colour: Red
- Wires: 3
- Operating Temperature: -10 to 60 degrees C
- Holes for Mounting: 3 mm
- Very small and lightweight voltmeter module.
- Very handy and easy to use.
- Red LED display.
- Best operates in the working voltage range of 5V to 24V
- Dimension: 13*30*9mm
- Weight: 3gm
7806 6V Positive Voltage Regulator IC
- Output current up to 1A
- Output Voltage: 6V
- Line Regulation (max): 120mV
- Load Regulation (max): 120mV
- Dropout Voltage: 2V
- Output Resistance: 19mΩ
- Output Voltages of 5, 6, 8, 9, 12, 15, 18, 24
- Internal thermal overload protection
- No external components required
- Output transistor safe area protection
- Internal short circuit current limit
- Available in the aluminium TO-3 package
- Thermal Overload Protection
- Short Circuit Protection
- Output Transistor Safe Operating Area Protection
78L08 8V Positive Voltage Regulator IC
MOQ: 3 nos
- Output Voltage: 8V
- Input Voltage Regulation: 42mV
- Output Voltage Regulation: 18mV
- Ripple Rejection: 46dB
- Dropout Voltage: 1.7V
- Package: TO-92
- 3-Terminal Regulators
- Output Current up to 100 mA
- No External Components
- Internal Thermal-Overload Protection
- Internal Short-Circuit
- Current Limiting
- Direct Replacements for Fairchild µA78L0
AMS1117 5V POWER SUPPLY MODULE
• Input: DC 6.5V – 12V (input voltage must be more than the output voltage (more than 1V))
• Output: 5V, 800mA (load current cannot exceed 800mA)
• Onboard AMS1117 chip.
• Onboard power indicator to indicate power is turned on: Red LED.
• Output voltage interface, connection to facilitate the experimental.
• Specially designed two pin mounting holes, can be directly fixed on the whole expansion board for experiments.
• Small Compact Size, 4Pin Type, Breadboard Friendly.
• 2P single row pin input and output for easy connection
• Dual-panel design, the layout is nice
Digital LCD Ampere Voltage Meter Ammeter Voltmeter AC 80 300V 100A
- Material: ABS
- Colour: White
- Voltage Measurement Range: AC 80-300V
- Current Measurement Range: AC 0-100.0A
- Power supply: < 0.2V*A
- Installation: Embedded installation
- Accuracy: 1% ± 2digit
- Measurement speed: about 2 times per second
- Display Type: LCD with blue backlight
- Operating Temperature: 10deg. C ~65deg. C
- Operating Humidity: 35~85 per cent RH
- Current Transformer: included
- Widely used in substation automation, distribution automation, test equipment, voltage regulator and so on
- Dimension: Approx. 7x4.1x3.2cm
LM2577 Step-Up Voltage Regulator IC
- Step-Up Voltage Regulator
- Requires few external components
- NPN output switches 3.0A, can stand off 65V
- Wide input voltage range: 3.5V to 40V
- Current-mode operation for improved transient response, line regulation, and current limit
- 52 kHz internal oscillator
- Soft-start function reduces in-rush current during start-up
- Output switch protected by current limit, under-voltage lockout, and thermal shutdown
Voltage Divider Module for boards compatible with Arduino
- Working Voltage: 5.0 V DC
- Measurement Accuracy: <=1%
- Input Range: 25V max
- Resistor Tolerance: 0.5%
- Temperature Coefficient: 50PPM/°C
- Ratio: 0.18 ( ADC reference voltage / 0.18)
- External voltage and grove interface
- Eliminates the need to connect resistance to the input interface
- Adjustable gain
- Easy to use
Reviews
There are no reviews yet.