I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-42%
DC –DC 600W 10-60V TO 12-80V BOOST CONVERTOR STEP UP MODULE POWER
Original price was: ₹2,000.00.₹1,300.00Current price is: ₹1,300.00. inc. GST
DS3231 RTC MODULE
Original price was: ₹500.00.₹375.00Current price is: ₹375.00. inc. GST
DIGITAL POWER AMPLIFIER BOARD MODULE 35W
Original price was: ₹1,200.00.₹700.00Current price is: ₹700.00. inc. GST
- Operating voltage: single DC 10-30V
- Recommended voltage: 24V
- Current: above 2A switching power supply
- Output power: 35w*1
- Speaker impedance: 4-8ohm, 8 ohm
- Circuit configuration: Mono BTL output
- Conversion efficiency: up to 95%
- Dimension: 45*31mm
- Size:251gm
Description
This is a high-performance digital amplifier with a TDA8932 chip. This module has a wide variety of applications in the field of transmission of active speakers, electro acoustics project implementation, product development, and other audio based applications. This is a high-power, high-efficiency module with good quality sound without any installation of a radiator. It operates at a voltage of DC 10V to 30V providing a conversion efficiency of up to 95%. The absence of the heat sink makes it unique compared to other amplifiers.
TDA8932 Digital power amplifier board 35W Mono Amplifier Module is a 10-30V Onboard TDA8932 stereo audio amplifier chip. In most of the audio signal applications, the audio signal from the audio output instrument such as a mobile phone, the microphone needs to amplify. In such cases, we use simple op-amp circuits so that we can play it over any speaker or stereo set. But in the case of higher amplification, we need a high power amplifier IC like the TDA8932 Audio Amplifier. This simple TDA8932 based Power Supply Audio amplifier board module directly connects the input from your instrument to the speaker.
This digital mono amplifier module provides a 35 Watt BTL output with a minimum operating voltage of 10V to a maximum of 30V DC input. This amplifier also works perfectly with 4 Ohms to 8 Ohms speakers that can be directly driven. However, highly recommended to use 24V DC input with an 8 Ohms speaker output for better performance. The onboard chip TDA8932 ensures high efficiency and eliminates the need for any additional heatsinks. This module is also known as Bluetooth audio amplifier board TDA8932  since it is used in Bluetooth audio applications.
Reviews (0)
Shipping & Delivery
Related products
1 CHANNEL 12V RELAY
- 1-Channel relay interface board
- Operating voltage: 12V DC
- Provide high current relay of 15A
- For quick and easy connection high-quality screw terminals provided
- Can control both AC & DC appliances
- LED status indicates relay ON/OFF state.
- High current relay of 10A @250 V AC/10A@ 30V DC
- Standard interface that can be controlled by a microcontroller (Arduino, 8051, PIC, AVR, DSP, ARM)
- For easy accessibility input signal pin connected to burg sticks
- Dimension: 43*17*17mm
- Weight: 150gm
4*4 MATRIX KEYPAD
The maximum voltage across each button: 24v
- The maximum current across each button: 3mA
- Easy communication with any microcontroller
- Ultra-thin design
- Adhesive backing provides easy integration
- High price-performance ratio
- Allows microcontroller to scan 8 output pins to check which 16 button
- Long life
- Maximum operating temperature: 0 degrees to 50 degrees Celsius
- Dimension: 70*77*1mm
- Weight: 7.5gm
8 CHANNEL 5V RELAY
- Relay operating voltage: 5V
- 8 channel
- High impedance controller pin
- One normally closed contact and one normally opened
- Useful for appliances control
- Power supply indicator and control indicator lamp
- Pull-down circuit to avoid malfunction
- Can control both DC and AC to 220v AC load
- Works with both 3.3 V and 5 V logic with the less current drive
- 3 terminals per SPDT relay
- Standard interface can be directly controlled by a microcontroller like Arduino, 8051, AVR, PIC, DSP, ARM, MSP430, TTL logic
- Dimension: 7*6.4*1 inch
AC-DC Power Module HLK-PM01 230V to 5V /3W
- Meet UL, CE requirements
- Rated input voltage: AC 100V -230V
- Maximum input voltage: <270V AC
- Voltage Regulation: ±0.2%
- Load Regulation: ±0.5%
- High efficiency, high power density
- Ultra-thin and small module
- Low ripple and low noise
- Output overload and short circuit protection
- 100% load ageing and testing
- The product is designed to meet the requirements of the EMC and Safety Test
- Low power consumption, environmental protection, no-load loss <0.1W
- High efficiency, high power density
- Working temperature: – 20 degrees to +60 degrees Celsius
- Storage temperature: + 80-40 -degree
- Relative humidity: 5-95%
- Cooling way: Natural cooling
- Atmospheric pressure: 80-106Kpa
- Weight: 21g
- Size: 38x23x18mm
DS3231 RTC MODULE
- Operating voltage of DS3231: 2.3 v to 5.5v
- 400Khz I2C interface
- Automatic power failure battery switch circuitry
- RTC counts seconds, minutes, hours, and year
- High precision clock chip DS3231
- Programmable square-wave output
- Chip temperature sensor accuracy:+/_3 degree Celsius
- Memory chip: AT24C32 with 32K storage capacity
- CR2032 battery backup with a high life span
- Low power consumption
- Register for ageing trim
- Dimension: 38mm*22mm*14mm
LM3886 68W Audio Power Amplifier IC
- High-Performance 68W Audio Power Amplifier with Mute
- 68W cont. avg. output power into 4Ω at VCC = ±28V
- 38W cont. avg. output power into 8Ω at VCC = ±28V
- 50W cont. avg. output power into 8Ω at VCC = ±35V
- 135W instantaneous peak output power capability
- Signal-to-Noise Ratio ≥ 92dB
- An input mute function
- Output protection from a short to ground or to the supplies via internal current limiting circuitry
- Output over-voltage protection against transients from inductive loads
- Wide supply range 20V - 94V
- 11-lead TO-220 package
Reviews
There are no reviews yet.