I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-20%Sold out
HS-45 TOP220 Package Heat Sink
Original price was: ₹8.00.₹6.00Current price is: ₹6.00. inc. GST
HS-49 TOP220 Package Heat Sink
Original price was: ₹12.00.₹10.00Current price is: ₹10.00. inc. GST
HS-48 TOP220 Package Heat Sink
Original price was: ₹10.00.₹8.00Current price is: ₹8.00. inc. GST
- Reduces the risk of hardware failure due to overheating
- Low profile, will fit into most cases.
- Simple, Passive cooling. No need for noisy fans.
- Perfectly sized
- Self-adhesive thermal layer for easy application
- The thermal resistance of 27°C/W
- Material: AluminiumColour: Silver
- Weight: 3g
Out of stock
Description
A heat sink is a heat-dissipating device constructed of thermally conductive material that is often mounted to a device to disperse unwanted heat. Whether you’re overclocking your device, operating it in a hot environment, or just want to look perfect, these high-quality heatsink kits is the perfect solution. It can help to reduce the operating temperature of the device chip and extend its life. Heat sinks installed.  A heatsink generally installed inside the device official case.  It is used to avoid throttling the CPU (and likely other components, as they all get very hot).
These Heat sinks commonly used for Multi- watt and TO-220 package ICs.Dissipate heat from any TO220 package device. These high quality little black anodized heat sinks are perfect for cooling any TO-220 package devices such as 78XX series regulators and TIP-122/127 or any MOSFET. This heatsink includes an interior screw threaded hole, allowing it to be mounted to components with merely a screw. The bottom and top of this heatsink have built-in threads for fastening it to the PCB.
These heat sink made from high quality copper and aluminum heat sink with the adhesive thermal layer. Protect your device from overheating. These best alloy for the highest heat dissipation providing adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. These heat sinks designed short enough to fit with standard microcontroller cases. Moreover, these heat sinks also used in other devices such as the BeagleBone to cool processors, regulators, etc.
Why Heat Sink?
- Reduces the risk of hardware failure due to overheating
- Low profile, will fit into most cases.
- Simple, Passive cooling. No need for noisy fans.
- Perfectly sized for the CPU
Reviews (0)
Shipping & Delivery
Related products
25pcs Button Switch Kit
- Relative Humidity: 95%
- Rated Voltage: 12V
- Rated Current: 50 mA
- Contact resistance: 50M Ohm Max (initial)
- The insulation resistance: 100M Ohm minDC (250V)
- The compressive strength: AC250V (50/60Hz for 1 minute)
- Mechanical life: 100000 cycles
- The environment temperature: 25° ~ + 105°
- The operating strength: 180/250 (plus or minus 30gf)
- Dimension: 12 * 12 * 7.3 round convex type
- Total Buttons: 25pcs
- Colours: 5 (Black, Red, White, Blue, Yellow)
Capacitor Touch Dimmer, Constant Voltage LED Stepless Dimming, PWM Control Board
- Voltage range: 4V to 5V
- Maximum output current: 500mA
- Hole distance: 16 mm
- Aperture: 5 mm
- The lamp brightness can be adjusted by requirement, it is very to operate.
- It can touch in medium protection, such as glass, acrylic, plastic, ceramics, and so on, which is very safe.
- Anti power and phone interference, the EFT can reach above +/-2KV; the touch response sensitivity and reliability will not be affected by the close distance or multi-angle mobile phone interference.
- Dimming mode: Non-polar PWM dimming.
- PCB size: 23 x 20mm
Dean Connector
- Male plug size: About 13* 7* 19mm
- Female plug size: About 13* 7* 15mm
- Current Rating: 30Amps
- Colour: Red and golden
- Material: Plastic and metal
- Provides a secure connection for battery and motor connections
- Eliminates the possibility of wrong polarity connections
- Used in RC hobby, car, boat, plane, helicopter, LIPO battery, etc.
- Dimension: 9x0.7x2cm
- Weight:20gm
Solid State Relay SSR-40DD 40A 3-32V DC to 5-60V DC SSR 40DD Relay Solid State
- Model: SSR-40 DD.
- Control mode: DC-DC
- Input voltage: 3-32V DC.
- Output voltage: 5-60V DC.
- Output current: 40A.
- On voltage: ≤1v.
- One-off time: ≤10ms.
- Off leakage current: ≤2ma.
- Loading current: 40A
- Control current: 3-25mA DC
- Material: plastic + metal.
- Environment temperature: -30 to +75
- Long service life and high reliability.
- Reduced electromagnetic interference.
- Highly reliable, compact size designed to offer users maximum simplicity.
- Weight: 0. 106Kg.
TP5100 4.2v 8.4v Single Double Lithium Battery Charge Management Li-ion Battery Compatible 2A Charging Board
- Input voltage: 5-15V DC power supply.
- Charge status: full and unloaded blue lights, charging red.
- Double 8.4v / 4.2v lithium rechargeable single .
- Programmable charge current. 0. 1A-2A .
- Programmable steady precharge current 10% -100%.
- Wide operating voltage, maximum reach I8V.
- Red and green LED charge status indicator.
- Chip temperature protection, overcurrent protection, under voltage protection.
- Battery temperature protection, reverse battery shutdown, short circuit protection.
- Switching frequency 400Khz, usable inductance 20uH and more.
- PWR_ON Power battery for switching control.
Reviews
There are no reviews yet.